webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

PPB 30 RC - Peripheral supply and exhaust device PPB 30 RC

Meer Maico
Meer Maico in Klimaatbeheersing

PPB 30 RC - Peripheral supply and exhaust device PPB 30 RC

EAN: 4012799952442 - manufacturer-number: PPB30RC - Peripheral supply and exhaust device - PPB 30 RC...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    634,25

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    PPB 30 K - Peripheral supply and exhaust device PPB 30 K
    PPB 30 K - Peripheral supply and exhaust device PPB 30 K
    EAN: 4012799952466 - manufacturer-number: PPB30K - Final assembly set comfort version PPB 30 K, energy efficiency class = A, energy efficiency class spectrum = A + to G, type of ventilation = decentralized supply and exhaust air, heat recovery via = other, heat source = outside air, nominal power = 2.5 W, degree of heat provision = 73% , With hot water preparation = no, With heating = no, With remote control = no, Air connection diameter = 160 mm, Height = 275 mm, Width = 275 mm, Depth = 410 mm, Weight = 4.69 kg, Volume flow = 26 m³ / h, With water air heater = no, with additional heating = no, final assembly sets for the PushPull Balanced PPB 30 single room ventilation unit with two fans, two ceramic heat exchangers, inner cover and two integrated filters (G3), so that the air is filtered in both directions. Versions: PPB 30 O object version, PPB 30 K comfort version with integrated humidity sensor and the possibility of volume flow compensation by PP 45 devices, PPB 30 RC radio versi…
    688,90
    PP 45 RHL - Accessory for ventilator PP 45 RHL
    PP 45 RHL - Accessory for ventilator PP 45 RHL
    EAN: 4012799590828 - manufacturer-number: PP45RHL - Shell long sleeve 800mm PP 45 RHL, type of mechanical accessories = other, the room air control is required as an accessory for the final assembly sets PP 45 K, PP 45 O or PPB 30 K, PPB 30 O. For the final assembly set PP 45 RC, the control can optionally be used instead of the radio switch DS 45 RC. The combination of RLS 45 K with the EnOcean extension module PP 45 EO is then necessary. The RLS 45 K room air control has the following setting options: 5 ventilation levels, operating modes permanent ventilation (with heat recovery), cross ventilation (without heat recovery) and sensor-controlled auto operation. Operating mode permanent ventilation with heat recovery: PushPull operation. The devices run alternately and change direction every 60 s. Cross ventilation mode: One device is permanently in supply air mode and the corresponding device is in exhaust air mode (e.g. for summer night cooling). In automatic mode, the delivery volum…
    66,79
    DL 50 WE2 - Peripheral supply and exhaust device DL 50 WE2
    DL 50 WE2 - Peripheral supply and exhaust device DL 50 WE2
    EAN: 4015627372726 - manufacturer-number: DL50WE2 - Ventilation unit E with inner wall panel DL 50 WE2, energy efficiency class = B, energy efficiency class spectrum = A + to G, type of ventilation = decentralized supply and exhaust air, heat recovery via = cross counterflow, heat source = exhaust air, nominal power = 23 W, degree of heat provision = 83%, Nominal current = 0.2 A, with hot water preparation = no, with heating = no, integration solar = no, with remote control = no, heating output heat pump = 0 kW, additional electrical heating = 0 kW, air connection diameter = 0 mm, height = 340 mm, width = 340 mm, depth = 320 mm, weight = 5.1 kg, volume flow = 50 m³ / h, with water air heater = no, with additional heating = no, decentralized living room ventilation unit with heat recovery for controlled ventilation of individual rooms. The ventilation unit is particularly suitable for retrofitting and renovation. Installation takes place directly into an outer wall without air ducts. Th…
    977,20
    DL 50 WA2 - Peripheral supply and exhaust device DL 50 WA2
    DL 50 WA2 - Peripheral supply and exhaust device DL 50 WA2
    EAN: 4015627372719 - manufacturer-number: DL50WA2 - Energy efficiency class B, Energy efficiency classes spectrum A+ to G, Type of ventilation decentralized supply and exhaust air, Heat recovery via Cross-counterflow unit, Heat source Exhaust, Rated capacity 23 W, Heat recovery rate 83 %, Rated current 0.2 A, With hot water no, With heating no, Integration solar no, With remote control no, Heating capacity heat pump 0 kW, Electric auxiliary heating 0 kW, Air connection diameter 0 mm, Height 340 mm, Width 340 mm, Depth 320 mm, Weight 5.1 kg, volume flow 50 m³/h, With water air heater no, With auxiliary heating no - DL 50 WA2
    817,74
    KNX-40E-1280D - EIB/KNX power supply 1280mA with integrated choke and diagnostic function
    KNX-40E-1280D - EIB/KNX power supply 1280mA with integrated choke and diagnostic function
    EAN: 4021087052412 - manufacturer-number: KNX-40E-1280D - The Mean Well EIB/KNX power supply KNX-40E-1280 D is a 1280mA power supply with high efficiency and a small footprint of only 4SU (72mm). The device has a KNX bus choke output and an additional output for auxiliary power. The -30°,C to 70°,C wide temperature operating range can meet all kinds of applications. For troubleshooting, monitoring purpose, output voltage, output current, bus traffic, device temperature and other actual measurement values can be sent via KNX. LED indicators are used in case of normal operation, overload conditions and reset-operation. It is perfectly suitable to power up any products labeled with the KNX trademark. With over 30 years of industrial power supply experience, KNX-40E-1280 D is engineered to be a reliable and safe solution for the KNX bus environment.Features:EIB/KNX power supply with integrated chokeCompact size with 4SU width (72mm)Safety extra low voltage (SELV)Suitable for TP1-256180~264…
    208,25
    KSR-01IP - EIB/KNX IP routing and tunneling device
    KSR-01IP - EIB/KNX IP routing and tunneling device
    EAN: 4021087047821 - manufacturer-number: KSR-01IP - The IP TP media coupler KSR series is a KNXnet/IP routing &, tunneling device and works as KNX IP line/area coupler. No need to have an exterbal power supply for powering. The ability to address all bus devices in the KNX bus system makes network operations less time-consuming. Operational and filtering states, malfunction and faulty communication are indicated by LEDs. The device is UPnP and ist firmware can be updated via the built-in web front-end page.The KSR series connects Ethernet/KNX IP and KNX TP two media for commissioning, addressing, parameters setting, visualization and diagnostic operations between devices on the KNX bus.KSR series is able to filter the traffic according to the installation place in the bus system hierarchy and according to the built-in filter tables for group oriented communication. Configuring from the subline can be blocked. Message filtering can be temporarily deactivated anytime via a button press …
    340,82

    Klanten-reviews van PPB 30 RC - Peripheral supply and exhaust device PPB 30 RC

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over PPB 30 RC - Peripheral supply and exhaust device PPB 30 RC

    Productomschrijving

    EAN: 4012799952442 - manufacturer-number: PPB30RC - Peripheral supply and exhaust device - PPB 30 RC

    Productspecificaties

    Artikelnummer(s)
    EAN
    4012799952442
    Brand
    Maico
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.