Productomschrijving
EAN: 4012799952466 - manufacturer-number: PPB30K - Final assembly set comfort version PPB 30 K, energy efficiency class = A, energy efficiency class spectrum = A + to G, type of ventilation = decentralized supply and exhaust air, heat recovery via = other, heat source = outside air, nominal power = 2.5 W, degree of heat provision = 73% , With hot water preparation = no, With heating = no, With remote control = no, Air connection diameter = 160 mm, Height = 275 mm, Width = 275 mm, Depth = 410 mm, Weight = 4.69 kg, Volume flow = 26 m³ / h, With water air heater = no, with additional heating = no, final assembly sets for the PushPull Balanced PPB 30 single room ventilation unit with two fans, two ceramic heat exchangers, inner cover and two integrated filters (G3), so that the air is filtered in both directions. Versions: PPB 30 O object version, PPB 30 K comfort version with integrated humidity sensor and the possibility of volume flow compensation by PP 45 devices, PPB 30 RC radio version with integrated radio board including humidity sensor and the option of volume flow compensation by PP 45 devices, we recommend these devices in exhaust air rooms (Toilet, bathroom, kitchen). This is easily possible thanks to the device protection class IP X4. Required accessories: body shell PP 45 RHK or PP 45 RHL, outer cover PPB 30 AK, PPB 30 AE, PPB 30 AW or PPB 30 AS, room air control RLS 45 K or RLS 45 O. With a room air control RLS 45 K or RLS 45 O you can Build a wired ventilation system from PPB 30 and PP 45 devices. The maximum number of fans used is 6. Different combinations are possible, e.g. 2 x PP 45 K / O + 1 x PPB 30 K + 1 x RLS 45 K or 3 x PPB 30 K + 1 x RLS 45 K. One combination of PPB 30 K and RLS 45 O is not permitted. DS 45 RC: With the radio switch DS 45 RC you can build a radio controlled ventilation system from PPB 30 RC and PP 45 RC devices, e.g. 4 x PP 45 RC + 1 x PPB 30 RC + 1 x DS 45 RC. PP 45 EO: If the RLS 45 K room air control is expanded with PP 45 EO, the wired devices can be combined with radio devices, e.g. 4x PP 45 K / O + 1 x PPB 30 RC + 1 x RLS 45 K + 1 x PP 45 EO. Optional accessories: Extension set PPB 30 VS, wall block PP 45 MB, compensation frame PPB 30 ARE and PPB 30 ARW, mounting plate PPB 30 ARE BB and PPB 30 ARW BB for compensation frame, humidity sensor PP 45 HYI and PP 45 HY, CO2 sensor PP 45 CO2 , VOC sensor PP 45 VOC, air filter, replacement PPB 30 G3, The room air controls RLS 45 K and RLS 45 O can be expanded with the internal humidity sensor PP 45 HYI or with the external sensors PP45 HY, PP 45 CO2 and PP 45 VOC. The devices achieve energy efficiency class A. The room air controls RLS 45 K and RLS 45 O can be operated in 5 ventilation levels 5/12/18/22/26 m3 / h and 2 operating modes permanent ventilation with heat recovery, cross ventilation without heat recovery and automatic operation. In addition, the RLS 45 K room air control offers the option of using the commissioning software to easily configure the device using a PC / laptop (Windows). The settings can be saved as profiles and transferred to other controls. Functions: The recommended combination option is 2 x or 4 x PP 45 O / K + 1 x PPB 30 K + 1 x RLS 45 K. The recommended combination option for radio-controlled system is 2 x or 4 x PP 45 RC + 1 or 2 x PPB 30 RC + 1 x DS 45 RC. In this case, the PPB 30 K / RC device can be operated in two different operating modes. In car mode, the device works completely independently depending on the humidity value from the integrated sensor. In auto mode, the RLS 45 K room air control or the DS 45 RC radio switch only executes the commands External Off and ventilation level 0. In system operation, the device works completely according to the specifications of the RLS 45 K room air control or DS 45 R - PPB 30 K