webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

KSR-01IP - EIB/KNX IP routing and tunneling device

Meer MEAN WELL
Meer MEAN WELL in Accessoires & diversen

KSR-01IP - EIB/KNX IP routing and tunneling device

EAN: 4021087047821 - manufacturer-number: KSR-01IP - The IP TP media coupler KSR series is a KNXnet/IP routing &, tunneling device and works as KNX IP line/area coupler. No need to have an exterbal power supply for powering. The ability to address all bus devices in the KNX bus system makes network operations less time-consuming. Operational and fi...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    340,82

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    N000402 - EIB KNX IP Router PoE
    N000402 - EIB KNX IP Router PoE
    manufacturer-number: N000402 - Note: The Power over Ethernet supply is standardized acc. to Standard PoE (IEEE 802.3af) and integrated via RJ45. We can recommend a PoE Ethernet Switch from Netgear, e.g. FS108P. The device disposes of 8 ports, four of which are equipped with Power over Ethernet (IEEE802.3af, 48 VDC). The IP Router, for example, can be connected to one of these four ports. As an alternative, power supply can be provided by means of screw connecting terminals at the upper side using a separate power supply unit (12-24V DC) or transformer (12-24V AC). Parallel power must be avoided! Caution when using managed Switches (Cisco or similar): With some Switches there can problems with the standard settings and the IP devices are not recognized. In this case make the following adjustment at the Switch: Full-Duplex-Mode Digit rate: 10 Megabit/s A blinking Ethernet LED at the IP Router or IP Interface indicates an existing link i.e. the digit rate and the mode have been set cor…
    273,07
    KSC-01L - EIB/KNX TP Media Coupler
    KSC-01L - EIB/KNX TP Media Coupler
    EAN: 4021087052405 - manufacturer-number: KSC-01L - The EIB/KNX TP Media Coupler KSC-01L works as a KNX line/area coupler to provide a bi-directional data connection between two KNX TP lines/areas. KNX TP main line and KNX TP subline are coupled having a galvanic isolation in between.Using the TP Coupler application, KSC-01L can be used as a KNX TP line coupler to connect several KNX TP lines but also as a KNX TP area coupler to connect several TP areas or different KNX TP installation systems via a TP Backbone. Telegram filtering is accomplished according to the installation place in the hierarchy (Physically [addressed] Telegrams) and according to the built in filter tables for group communication (Group [oriented] Telegrams).For detailed diagnosis all operational modes/states are shown by a duo-LED display. Using the TP Repeater application, KSC-01L is able to extend a KNX TP line providing unfiltered data transfer and galvanic isolation between segments. Up to four line segments ca…
    262,75
    N000401 - EIB KNX IP Interface PoE, with up to 5 tunneling connections
    N000401 - EIB KNX IP Interface PoE, with up to 5 tunneling connections
    manufacturer-number: N000401 - Note: The Power over Ethernet supply is standardized acc. to Standard PoE (IEEE 802.3af) and integrated via RJ45. We can recommend a PoE Ethernet Switch from Netgear, e.g. FS108P. The device disposes of 8 ports, four of which are equipped with Power over Ethernet (IEEE802.3af, 48 VDC). The IP interface, for example, can be connected to one of these four ports. As an alternative, power supply can be provided by means of screw connecting terminals at the upper side using a separate power supply unit (12-24V DC) or transformer (12-24V AC). Parallel power must be avoided! Caution when using managed Switches (Cisco or similar): With some Switches there can problems with the standard settings and the IP devices are not recognized. In this case make the following adjustment at the Switch: Full-Duplex-Mode Digit rate: 10 Megabit/s A blinking Ethernet LED at the IP Router or IP Interface indicates an existing link i.e. the digit rate and the mode have been set …
    139,02
    52900 - EIB, KNX Home Server 4 with EIB, KNX IP Router, 52900
    52900 - EIB, KNX Home Server 4 with EIB, KNX IP Router, 52900
    manufacturer-number: 52900 - Additional delivery volume: 1 pce EIB/KNX IP Router EIBMARKT GmbH (N000402) with Power over Ethernet (PoE) NOTE: The GIRA Home Server 4 is the new on-board computer for the intelligent house. As an interface between modern electrical installation and computer network it controls all components of home automation that are interconnected by means of the KNX/EIB system and offers the possibility to integrate numerous other technologies into the home control system. The Gira Home Server 4 can easily be fixed to the wall using an optional wall bracket. This saves space, permits easy access to the connecting points on the rear side of the device and facilitates the management of cables. For use in commercial buildings the special Gira Facility Server can be provided. It disposes of more memory capacity and is supplied as 19 Zoll plug-in unit with aluminium cover for installation in a 19 Zoll rack. With its high diversity of control elements such as the Gira Co…
    2.223,68
    52900 - EIB, KNX Home Server 4, 52900 - special offer
    52900 - EIB, KNX Home Server 4, 52900 - special offer
    EAN: 4010337529002 - manufacturer-number: 52900 - NOTE:We also offer the Home Server 4 in a special offer for our customers of eibmarkt.com (see tab ZollACCESSORY Zoll). In this offer the KNX IP Router (Interface to KNX) is included. The GIRA Home Server 4 is the new on-board computer for the intelligent house. As an interface between modern electrical installation and computer network it controls all components of home automation that are interconnected by means of the KNX/EIB system and offers the possibility to integrate numerous other technologies into the home control system. The Gira Home Server 4 can easily be fixed to the wall using an optional wall bracket. This saves space, permits easy access to the connecting points on the rear side of the device and facilitates the management of cables. For use in commercial buildings the special Gira Facility Server can be provided. It disposes of more memory capacity and is supplied as 19 Zoll plug-in unit with aluminium cover for insta…
    2.145,62
    SCN-IP100.03 - IP Interface with IP Routing, with KNX IP and Data Secure, Email and time server functions - SCN-IP100.03
    SCN-IP100.03 - IP Interface with IP Routing, with KNX IP and Data Secure, Email and time server functions - SCN-IP100.03
    EAN: 4251916100117 - manufacturer-number: SCN-IP100.03 - IP Router with IP Secure and Data Secure, 2SU MDRC, with email and time server functions. Functions as KNX IP Interface, but with KNX line coupler functionality. To enable bidirectional communication between PC and the KNX bus via TCP/IP. 4 simultaneous connections possible. Programming the KNX bus via TCP/IP. Power supply by KNX bus, no external bus power supply required. Encrypted transmission at sending emails. Time server functions to send time and date on the KNX bus. Supports extended group addresses. KNX IP Secure and KNX Data Secure (from ETS 5.7). Secure access to the KNX bus through IP Secure with security key. Firmware can be updated. Quick application download (long frame support for ETS5). - SCN-IP100.03
    266,45
    KDA-064 - EIB/KNX DALI Gateway
    KDA-064 - EIB/KNX DALI Gateway
    EAN: 4021087028059 - manufacturer-number: KDA-064 - The EIB/KNX DALI Gateway KDA-064 is used to connect a digital DALI lighting system to the KNX installation. Thus, room-based lighting control is conveniently incorparated into the higher-level KNX building management system.The device transforms switch- and dim-commands from the connected KNX system into DALI telegrams and status information from the DALI bus into KNX telegrams. The EIB/KNX DALI Gateway KDA-064 is a Category 1 device (in accordance with EN 62386-103). This means the device must only be used in DALI segments with connected ECGs and not with other DALI control devices within the segment (No multi-master function).Power supply for the up to 64 connected ECGs comes directly from the DALI Gateway. An addistional DALI power supply is not required and not permitted. The item comes in a 4 units wide DIN rail casing so it can be directly integrated into the main distribution box. The connection to the KNX bus is realized via b…
    499,80
    ELS 70601 Cala KNX T - Cala KNX Ambient Climate Sensor and Control, ELS 70601 Cala KNX T, black
    ELS 70601 Cala KNX T - Cala KNX Ambient Climate Sensor and Control, ELS 70601 Cala KNX T, black
    EAN: 4051996706014 - manufacturer-number: ELS70601CalaKNXT - Cala KNX Ambient Climate Sensor and Control, ELS 70601 Cala KNX T, black with temperature sensor The Sensor with Cala KNX display for the KNX bus system measures various ambient climate. Via the bus, the indoor sensor can receive external values and process them further with its own data to a total value (mixed value, e.g. room average). All measured values can be used for the control of threshold value-dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multi-functional modules change input data as required by means of calculations, querying a condition, or converting the data point type. In addition, an integrated manipulated variable comparator can compare and output variables that were received via communication objects. Integrated PI-controllers control ventilation (according to humidity or CO2-concentration) and/or heating/cooling (according to temperature), depending on the respect…
    236,42
    SCN-IP000.03 - IP Interface, with KNX IP and Data Secure, Email and time server functions - SCN-IP000.03
    SCN-IP000.03 - IP Interface, with KNX IP and Data Secure, Email and time server functions - SCN-IP000.03
    EAN: 4251916100100 - manufacturer-number: SCN-IP000.03 - IP Interface with IP Secure and Data Secure, 2SU MDRC, with email and time server functions. To enable bidirectional communication between PC and the KNX bus via TCP/IP. 4 simultaneous connections possible. Programming the KNX bus via TCP/IP. Power supply by KNX bus, no external bus power supply required. Encrypted transmission at sending emails. Time server functions to send time and date on the KNX bus. Supports extended group addresses. KNX IP Secure and KNX Data Secure (from ETS 5.7). Secure access to the KNX bus through IP Secure with security key. Firmware can be updated. Quick application download (long frame support for ETS5). - SCN-IP000.03
    165,28
    ELS 70602 Cala KNX TH - Cala KNX Ambient Climate Sensor and Control, ELS 70602 Cala KNX TH, black
    ELS 70602 Cala KNX TH - Cala KNX Ambient Climate Sensor and Control, ELS 70602 Cala KNX TH, black
    EAN: 4051996706021 - manufacturer-number: ELS70602CalaKNXTH - Cala KNX Ambient Climate Sensor and Control, ELS 70602 Cala KNX TH, black with temperature and humidity sensor The Sensor with Cala KNX display for the KNX bus system measures various ambient climate. Via the bus, the indoor sensor can receive external values and process them further with its own data to a total value (mixed value, e.g. room average). All measured values can be used for the control of threshold value-dependent switching outputs. States can be linked via AND logic gates and OR logic gates. Multi-functional modules change input data as required by means of calculations, querying a condition, or converting the data point type. In addition, an integrated manipulated variable comparator can compare and output variables that were received via communication objects. Integrated PI-controllers control ventilation (according to humidity or CO2-concentration) and/or heating/cooling (according to temperature), depending…
    275,38

    Klanten-reviews van KSR-01IP - EIB/KNX IP routing and tunneling device

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over KSR-01IP - EIB/KNX IP routing and tunneling device

    Productomschrijving

    EAN: 4021087047821 - manufacturer-number: KSR-01IP - The IP TP media coupler KSR series is a KNXnet/IP routing &, tunneling device and works as KNX IP line/area coupler. No need to have an exterbal power supply for powering. The ability to address all bus devices in the KNX bus system makes network operations less time-consuming. Operational and filtering states, malfunction and faulty communication are indicated by LEDs. The device is UPnP and ist firmware can be updated via the built-in web front-end page.The KSR series connects Ethernet/KNX IP and KNX TP two media for commissioning, addressing, parameters setting, visualization and diagnostic operations between devices on the KNX bus.KSR series is able to filter the traffic according to the installation place in the bus system hierarchy and according to the built-in filter tables for group oriented communication. Configuring from the subline can be blocked. Message filtering can be temporarily deactivated anytime via a button press on the device. The time to switch back to normal operation is ETS configurable. If necessary, temporary access to other lines is possible also without download from the ETS. ,Features:KNX IP/TP routing4 KNX IP/TP tunnelingsbuilt-in web frontendno additional KNX power supply neededCompact size with 2 unit widthInstalled on DIN rail TS-35 / 7.5 or 15Specifications:Series: KSRRoHS: CompliantApplication: ITE EN/UL/IEC 60950Power Format: DIN railIP Rating: IP20Width: 36mmHeight: 90mmDepth: 71mmBus system: KNX - KSR-01IP

    Productspecificaties

    Artikelnummer(s)
    EAN
    4021087047821
    Brand
    MEAN WELL
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.