webshop.nl

Verlanglijstje

Cyclus Tools Lager afnemer bracketas campa ultra torque cyclus 720250
Cyclus Tools Lager afnemer bracketas campa ultra torque cyclus 720250

Meer Cyclus Tools
Meer Cyclus Tools in Cranks

Cyclus Tools Lager afnemer bracketas campa ultra torque cyclus 720250

0
Product Description Compatibility: Campagnolo Ultra Torque Manufacturer Number: 720250 Note: The puller is exclusively for extracting the ball bearings of Campagnolo Ultra Torque cranks. Contents:1 x Cyclus Tools puller for industrial ball bearings Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu Cyclu...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Verkopers met dit product

    Verkoper
    Bezorging
    Prijs
    Fietsaccessoires.nl logo
    Fietsaccessoires.nl
    2 dagen
    €6,95
    €254,99
    Fietsenwinkel.be logo
    Fietsenwinkel.be
    niet bekend
    niet bekend
    €254,99
    Fietsweb.nl logo
    Fietsweb.nl
    niet bekend
    €6,95
    €254,99

    Anderen bekeken ook

    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Product Description The extractor is suitable for extracting Campagnolo Oversize front and rear wheel bearing cups. The driver fits Campagnolo OVZ front and rear hubs (e.g. Record from model 1999 HB-40 RE, current Record FH-29 RE, Record HB7, Record FH7) Features:suitable for Campagnolo bearing cupVersion for OversizeManufacturer Number: 720112 Contents:1 x Cyclus Tools OVZ bearing cup removal tool Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    49,99
    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Product Description The extractor is suitable for extracting Campagnolo Oversize front and rear wheel bearing cups. The driver fits Campagnolo OVZ front and rear hubs (e.g. Record from model 1999 HB-40 RE, current Record FH-29 RE, Record HB7, Record FH7) Features:suitable for Campagnolo bearing cupVersion for OversizeManufacturer Number: 720112 Contents:1 x Cyclus Tools OVZ bearing cup removal tool Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    49,99
    Cyclus Tools Snap-in sn-81 afnemer afsluit moer yamaha cyclus 7202781
    Cyclus Tools Snap-in sn-81 afnemer afsluit moer yamaha cyclus 7202781
    Product Description Specifications:Function:installation & removal of chainringsTool Type:Remover, socketDrive:open-end wrench 32 mm, square wrench 3/8"Compatibility:Yamaha e-bike motors from the PW-X series, Giant e-bike motors from the syncDrive-pro seriesTechnical Information:Material:steelFeatures:tool for the chainring lockring on e-bike mid-drive motors from Yamaha (PW-X) and Giant (syncDrive pro)integrated guide for bolting to the motor axle for a non-slip fitpossibility of one-hand operationpositive-locking connection with the toothing of the locknut by means of a pull-turn mechanism, high torques possibleuse with Snap.In holder from Cyclus Tools or with 32 mm open-end wrench3/8" torque wrench recommended for tightening the lockringNote from the manufacturer:When tightening the lockring, please observe the torque specified by the manufacturer. Not designed for use with cordless or impact screwdrivers. Manufacturer Number:7202781 Contents:1 x Cyclus Tools Snap.In SN.81-W lockrin…
    90,99
    Cyclus Tools Uitdrijver lagerschalen campa a.naaf cyclus 720111
    Cyclus Tools Uitdrijver lagerschalen campa a.naaf cyclus 720111
    Product Description The drift is suitable for driving out Campagnolo rear wheel bearing cups. Features:suitable for Campagnolo bearing cupversion for rear wheelManufacturer Number: 720111 Note: This removal tool is not suitable for Campagnolo OVZ hubs (e.g. Record from 1999 model...). Please note that the removal tool consists of spring steel and always must lie flat on the bearing cup to be removed. Incorrect use (e.g. by tilting) can damage the ejector. You should therefore always work carefully when pulling. Contents:1 x Cyclus Tools bearing cup removal tool, rear hubs Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    44,99
    Cyclus Tools Snap.in e-bike afnemer cyclus sn.86-w shimano steps ep8
    Cyclus Tools Snap.in e-bike afnemer cyclus sn.86-w shimano steps ep8
    Cyclus snap.In E-bike afnemer SN.86-W Shimano Steps EP8 Merk: Cyclus Basismateriaal: staal Basiskleur: zwart Product Description Specifications:Function:installation & removal of chainringsTool Type:Remover, socketDrive:open-end wrench 32 mm, square wrench 3/8"Compatibility:Shimano EP8 e-bike motors, Shimano STEPS E8000 e-bike motors, Shimano STEPS E6100 e-bike motorsTechnical Information:Material:steelFeatures:tool for the chainring lockring on Shimano e-bike mid-drive motors (EP8, E8000, E6100)integrated guide for bolting to the motor axle for a non-slip fitpossibility of one-hand operationpositive-locking connection with the toothing of the locknut by means of a pull-turn mechanism, high torques possibleuse with Snap.In holder from Cyclus Tools or with 32 mm open-end wrench3/8" torque wrench recommended for tightening the lockringNote from the manufacturer:When tightening the lockring, please observe the torque specified by the manufacturer. Not designed for use with cordless or imp…
    131,99
    Cyclus Tools Snap.in e-bike afnemer cyclus sn.86-w shimano steps ep8
    Cyclus Tools Snap.in e-bike afnemer cyclus sn.86-w shimano steps ep8
    Cyclus snap.In E-bike afnemer SN.86-W Shimano Steps EP8 Merk: Cyclus Basismateriaal: staal Basiskleur: zwart Product Description Specifications:Function:installation & removal of chainringsTool Type:Remover, socketDrive:open-end wrench 32 mm, square wrench 3/8"Compatibility:Shimano EP8 e-bike motors, Shimano STEPS E8000 e-bike motors, Shimano STEPS E6100 e-bike motorsTechnical Information:Material:steelFeatures:tool for the chainring lockring on Shimano e-bike mid-drive motors (EP8, E8000, E6100)integrated guide for bolting to the motor axle for a non-slip fitpossibility of one-hand operationpositive-locking connection with the toothing of the locknut by means of a pull-turn mechanism, high torques possibleuse with Snap.In holder from Cyclus Tools or with 32 mm open-end wrench3/8" torque wrench recommended for tightening the lockringNote from the manufacturer:When tightening the lockring, please observe the torque specified by the manufacturer. Not designed for use with cordless or imp…
    131,99

    Klanten-reviews van Cyclus Tools Lager afnemer bracketas campa ultra torque cyclus 720250

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cyclus Tools Lager afnemer bracketas campa ultra torque cyclus 720250

    Productomschrijving

    Product Description Compatibility: Campagnolo Ultra Torque Manufacturer Number: 720250 Note: The puller is exclusively for extracting the ball bearings of Campagnolo Ultra Torque cranks. Contents:1 x Cyclus Tools puller for industrial ball bearings Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu Cyclus Artikelnummer: 675991 EAN-code: 8590831430708

    Productinformatie

      Productspecificaties

      Artikelnummer(s)
      EAN
      8590831430708
      Brand
      Cyclus Tools

      Verken gerelateerde categorieën

      CranksFietsonderdelenFietsen
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.