webshop.nl

Verlanglijstje

Cyclus Tools Voorvork-conus trekker cyclus 720137
Cyclus Tools Voorvork-conus trekker cyclus 720137
Cyclus Tools Voorvork-conus trekker cyclus 720137

Meer Cyclus Tools
Meer Cyclus Tools in Voorvorken

Cyclus Tools Voorvork-conus trekker cyclus 720137

0
Product Description Use the crown race puller to remove the crown race of the headset from the crown race seat. The advantage of the crown race puller is that you do not scratch the fork when removing the crown race and you do not damage the headset cone ring. The puller can be used universally. It is suitable for all types of headsets or forks (e....

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Alle aanbiedingen van dit product

    Verkoper
    Bezorging
    Prijs
    Fietsaccessoires.nl logo
    Fietsaccessoires.nl
    2 dagen
    €6,95
    €477,99
    Fietsenwinkel.be logo
    Fietsenwinkel.be
    niet bekend
    niet bekend
    €461,99

    Anderen bekeken ook

    Cyclus Tools Voorvork conus-frees cyclus 720003
    Cyclus Tools Voorvork conus-frees cyclus 720003
    Product Description You create exactly levelled crown race seats with this plane milling tool. Features:suitable for crown racewith matching milling cutter in 1" or 1 1/8"max. milling depth 6 mmManufacturer Numbers:1":7200031 1/8":720004 Note: Remove any chrome layers before milling to avoid excessive wear of the cutting edges or " seizing" of the tool on the crown race seat. Contents:1 x Cyclus Tools face milling tool1 x Cyclus Tools mount Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    187,99
    Cyclus Tools Cyclus inslaggereedschap ahead plug 1“ 1⅛“ 1½"
    Cyclus Tools Cyclus inslaggereedschap ahead plug 1“ 1⅛“ 1½"
    Cyclus inslaggereedschap Aheadplug tbv 1“ 1.1/8“ 1.5“ vorkb. Product Description Specifications:Function:Fork maintenance and repairTool Type:special toolCompatibility:1" / 1 1/8" / 1.5"Technical Information:Material:steelFeatures:tool for precise installation of the star nut in the steerer tube with a previously defined insertion depthsuitable for 1" , 1 1/8" and 1.5" crown race with the corresponding adapter bushingApplication:1. Screw the required adapter hand-tight into the impactor. 2. Screw the star nut to be fitted onto the grub screw as far as it will go using the cross hole. 3. Place the tool on the steerer tube and hammer it in as far as it will go. 4. Remove the setter from the steerer tube by turning the knurled screw to the left. Manufacturer Number:720033 Contents:1 x Cyclus Tools impactor for headset star nut1 x adapter bushing 1"1 x adapter bushing 1 1/8"1 x adapter bushing 1.5" Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    110,99
    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Product Description The extractor is suitable for extracting Campagnolo Oversize front and rear wheel bearing cups. The driver fits Campagnolo OVZ front and rear hubs (e.g. Record from model 1999 HB-40 RE, current Record FH-29 RE, Record HB7, Record FH7) Features:suitable for Campagnolo bearing cupVersion for OversizeManufacturer Number: 720112 Contents:1 x Cyclus Tools OVZ bearing cup removal tool Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu Cyclus Artikelnummer: 679911 EAN-code: 8590831240437
    53,99
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    1-1/8 inch compleet met snij-ijzer Cyclus vorkbuissnijwerktuig, 1 1/8 inch compleet met snij-ijzer Product Description The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube. Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread. Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork. Features:suitable for recutting the thread on the fork tubewith matching dieoptionally as 1" or 1 1/8"Manufacturer Numbers:1":720001 sold-out1 1/8":720002 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool. Contents:1 x Cyclu…
    221,99
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    1-1/8 inch compleet met snij-ijzer Cyclus vorkbuissnijwerktuig, 1 1/8 inch compleet met snij-ijzer Product Description The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube. Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread. Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork. Features:suitable for recutting the thread on the fork tubewith matching dieoptionally as 1" or 1 1/8"Manufacturer Numbers:1":720001 sold-out1 1/8":720002 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool. Contents:1 x Cyclu…
    190,99
    Cyclus Tools Naafcontroleur cyclus 720036
    Cyclus Tools Naafcontroleur cyclus 720036
    Cyclus naafcontroleur en richtapparaat Product Description The wheel centring tool from Cyclus Tools can detect deviations in the wheel's axial symmetry. Specifications:Function:measuring toolTool Type:gaugeTechnical Information:Material:steelCompatibility:suitable for 24" to 29" wheelsManufacturer Number:720036 Contents:1 x Cyclus Tools centring tool2 x Cyclus Tools adapters for wide axles Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu Cyclus Artikelnummer: 658329 EAN-code: 8590831510707
    167,99
    Cyclus Tools Uitdrijver lagerschalen campa a.naaf cyclus 720111
    Cyclus Tools Uitdrijver lagerschalen campa a.naaf cyclus 720111
    Product Description The drift is suitable for driving out Campagnolo rear wheel bearing cups. Features:suitable for Campagnolo bearing cupversion for rear wheelManufacturer Number: 720111 Note: This removal tool is not suitable for Campagnolo OVZ hubs (e.g. Record from 1999 model...). Please note that the removal tool consists of spring steel and always must lie flat on the bearing cup to be removed. Incorrect use (e.g. by tilting) can damage the ejector. You should therefore always work carefully when pulling. Contents:1 x Cyclus Tools bearing cup removal tool, rear hubs Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    48,99
    Cyclus Tools Inslagwerktuig cyclus ahead prop
    Cyclus Tools Inslagwerktuig cyclus ahead prop
    Om te controleren van de plek van de ster-moer. Cyclus inslaggereedschap voor A-head plug 1"en 1 1/8". Garandeert het exact inbrengen van de A-head plug in de juiste stand. Draai de passende bus (1" of 1 1/8") met de hand vast in het inslaggereedschap. Schroef nu de te monteren plug met behulp van het geboorde gat tot aan de aanslag op de bout. Zet het gereedschap op de voorvorkbuis en sla het met een hamer tot aan de aanslag in. Door het naar links draaien van de draaischijf is het gereedschap vervolgens te verwijderen van de voorvork. Product Description The push-in tool guarantees you an exact insertion of the Ahead claw into the steerer tube with a previously defined impact depth. Features:guarantees exact insertion of the Ahead claw into a defined impact depthsuitable for 1" and 1 1/8"Manufacturer Number: 720088 Contents:1 x Cyclus Tools push-in tool1 x Cyclus Tools threaded bushing, 1"1 x Cyclus Tools threaded bushing, 1 1/8" Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55…
    65,99

    Klanten-reviews van Cyclus Tools Voorvork-conus trekker cyclus 720137

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cyclus Tools Voorvork-conus trekker cyclus 720137

    Productomschrijving

    Product Description Use the crown race puller to remove the crown race of the headset from the crown race seat. The advantage of the crown race puller is that you do not scratch the fork when removing the crown race and you do not damage the headset cone ring. The puller can be used universally. It is suitable for all types of headsets or forks (e.g. suspension forks, IHS forks, etc.). Features:suitable for removing the crown raceuniversally usableManufacturer Number: 720137 Contents:1 x Cyclus Tools 1" extractor claw1 x Cyclus Tools 1 1/8" extractor claw1 x Cyclus Tools clamping sleeve1 x Cyclus Tools threaded socket1 x Cyclus Tools turning spindle Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu

    Productinformatie

      Productspecificaties

      Artikelnummer(s)
      EAN
      8590831240345
      Brand
      Cyclus Tools

      Verken gerelateerde categorieën

      VoorvorkenFietsonderdelenFietsen
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.