webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

UA6P - Press insert tool insert UA6P

Meer Klauke
Meer Klauke in Klussen

UA6P - Press insert tool insert UA6P

EAN: 4012078350495 - manufacturer-number: UA6P - Press insert tool insert Application Other, Compression shape Other - UA6P...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    714,70

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181
    Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181
    Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the st…
    90,88
    Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181
    Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181
    Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the st…
    91,95
    Maxpedition - Falcon II Backpack (black)
    Maxpedition - Falcon II Backpack (black)
    Excellent organization in a narrow profile that stays behind your bodyThe Falcon II™ Backpack is the quintessential Maxpedition® product: Durable, ergonomic, and intelligently designed. This medium bodied pack is thoroughly constructed with 1050-Denier water & abrasion resistant nylon; yet its ergonomic shape, padded shoulder straps and sturdy sternum & waist support make it an absolute delight to wear. Further examination will reveal that the Falcon II has layered independent compartments with more pockets, pouches and PALS attachment points than most backpacks twice its size. Pull the dual-directional YKK® zippers and expand the main compartment into a full clamshell opening. You'll find that the Falcon II is surprisingly spacious with room to accommodate your camping essentials and two (2) 100oz/3L water reservoirs. Pack it up and press it down with front & side compression straps, then head out on a hike or overnight with a premium Maxpedition backpack.See Falcon-II Backpack in act…
    219,95
    Maxpedition - Falcon II Backpack (Foliage green)
    Maxpedition - Falcon II Backpack (Foliage green)
    Excellent organization in a narrow profile that stays behind your bodyThe Falcon II™ Backpack is the quintessential Maxpedition® product: Durable, ergonomic, and intelligently designed. This medium bodied pack is thoroughly constructed with 1050-Denier water & abrasion resistant nylon; yet its ergonomic shape, padded shoulder straps and sturdy sternum & waist support make it an absolute delight to wear. Further examination will reveal that the Falcon II has layered independent compartments with more pockets, pouches and PALS attachment points than most backpacks twice its size. Pull the dual-directional YKK® zippers and expand the main compartment into a full clamshell opening. You'll find that the Falcon II is surprisingly spacious with room to accommodate your camping essentials and two (2) 100oz/3L water reservoirs. Pack it up and press it down with front & side compression straps, then head out on a hike or overnight with a premium Maxpedition backpack.See Falcon-II Backpack in act…
    219,95
    Wheels manufacturing Wheels mfg adjustable press stop 1/2 inch
    Wheels manufacturing Wheels mfg adjustable press stop 1/2 inch
    The Adjustable Press Stop slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings.   Compatible with Wheels Manufacturing press kits: BP0006, BP0007, BP0008, Press-7, Press-7-Pro, Press-8, and Press-9-Pro   Machined aluminum body, anodized red   Durable steel button   For use with 1/2" UNC threaded press rod   Artikelnummer: BP0009 EAN: 811079027023 Merken: Wheels Manufacturing Model: PRESS STOP
    84,93
    Wheels manufacturing Wheels mfg adjustable press stop 1/2 inch
    Wheels manufacturing Wheels mfg adjustable press stop 1/2 inch
    The Adjustable Press Stop slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings.   Compatible with Wheels Manufacturing press kits: BP0006, BP0007, BP0008, Press-7, Press-7-Pro, Press-8, and Press-9-Pro   Machined aluminum body, anodized red   Durable steel button   For use with 1/2" UNC threaded press rod   Artikelnummer: BP0009 EAN: 811079027023 Merken: Wheels Manufacturing Model: PRESS STOP
    85,95
    Wheels manufacturing Wheels mfg trapaspers adapter 29x42mm open bore
    Wheels manufacturing Wheels mfg trapaspers adapter 29x42mm open bore
    29mm open bore adapter is used to press 29mm x 42mm (DUB Compatible) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. Will press in Wheels Mfg SRAM DUB compatible bottom bracket cups. 1/2" thru hole for use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO). • Installs: 29X42 (DUB compatible) bearing • Inner Step Outer Diameter: 41.8mm • Outer Diameter: 28.9mm • Thru Hole Diameter: 12.8mm (1/2") • Thickness: 7mm • Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod. • Machined, red anodized aluminum • Sold individually 29SRAM-OB is designed specifically to press in 6806/29 sealed bearings and will also press in Wheels Mfg SRAM DUB compatible bottom brackets. May not be suitable for pressing in other brand's DUB compatible bottom brackets. If used with other brand BBs, make sure the adapter is pushing on either the bearing outer race, or the BB cup itself. Do not push on the…
    32,83
    Wheels manufacturing Wheels mfg trapaspers adapter 29x42mm open bore
    Wheels manufacturing Wheels mfg trapaspers adapter 29x42mm open bore
    29mm open bore adapter is used to press 29mm x 42mm (DUB Compatible) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. Will press in Wheels Mfg SRAM DUB compatible bottom bracket cups. 1/2" thru hole for use with Wheels Mfg Bottom Bracket Press (PRESS-7, PRESS-7-PRO or PRESS-9-PRO). • Installs: 29X42 (DUB compatible) bearing • Inner Step Outer Diameter: 41.8mm • Outer Diameter: 28.9mm • Thru Hole Diameter: 12.8mm (1/2") • Thickness: 7mm • Compatible with PRESS-7, PRESS-7-PRO or PRESS-9-PRO handles/rod. • Machined, red anodized aluminum • Sold individually 29SRAM-OB is designed specifically to press in 6806/29 sealed bearings and will also press in Wheels Mfg SRAM DUB compatible bottom brackets. May not be suitable for pressing in other brand's DUB compatible bottom brackets. If used with other brand BBs, make sure the adapter is pushing on either the bearing outer race, or the BB cup itself. Do not push on the…
    33,95

    Klanten-reviews van UA6P - Press insert tool insert UA6P

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over UA6P - Press insert tool insert UA6P

    Productomschrijving

    EAN: 4012078350495 - manufacturer-number: UA6P - Press insert tool insert Application Other, Compression shape Other - UA6P

    Productspecificaties

    Artikelnummer(s)
    EAN
    4012078350495
    Brand
    Klauke
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.