webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181

Meer Cycplus
Meer Cycplus in Fietsgereedschap

Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181

Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, int...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    90,88

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181
    Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181
    Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the st…
    91,95
    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cyclus Tools bearing cartridge Pullers for Campagnolo Ultra Torque crank. The puller is exclusively for removing the ball bearings of Campagnolo Ultra Torque cranks! Included: - puller industry Bearings Campagnolo Ultra Torque crank. Preparation: First, remove the snap ring on the right side crank sitting in front of the ball bearings. Application: Now run the puller on the crank axle. Spread the arms of the stripper, than join the three clamps behind the bearing shell. Now turn the rotary spindle of the stripper. The ball bearing should now be deducted equally from the bearing seat. Then clean the bearing seat and grease it a little. To assemble the new ball bearing, you can use the Cyclus tools Impress tool (Part No .: 720 263) for Campagnolo cranks. Accessories: Part No .: 720 252 Adapter Campagnolo crank to pull the bearing ring. Artikelnummer: 7720250 EAN: 8590831430708 Merken: Cyclus Materiaal: Staal Type gereedschap: Trapas Netto gewicht (g): 1007 Kleur.: Zilver
    177,95
    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cyclus Tools bearing cartridge Pullers for Campagnolo Ultra Torque crank. The puller is exclusively for removing the ball bearings of Campagnolo Ultra Torque cranks! Included: - puller industry Bearings Campagnolo Ultra Torque crank. Preparation: First, remove the snap ring on the right side crank sitting in front of the ball bearings. Application: Now run the puller on the crank axle. Spread the arms of the stripper, than join the three clamps behind the bearing shell. Now turn the rotary spindle of the stripper. The ball bearing should now be deducted equally from the bearing seat. Then clean the bearing seat and grease it a little. To assemble the new ball bearing, you can use the Cyclus tools Impress tool (Part No .: 720 263) for Campagnolo cranks. Accessories: Part No .: 720 252 Adapter Campagnolo crank to pull the bearing ring. Artikelnummer: 7720250 EAN: 8590831430708 Merken: Cyclus Materiaal: Staal Type gereedschap: Trapas Netto gewicht (g): 1007 Kleur.: Zilver
    173,78
    Wheels manufacturing Wheels mfg trapas t47 sram 22/24mm acb zwart
    Wheels manufacturing Wheels mfg trapas t47 sram 22/24mm acb zwart
    T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 73mm - 132mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 24mm, Weight: 123g, Packaged for retail display. Artikelnummer: T47-BB-SRAM-AC EAN: 811079024251 Merken: Wheels Manufacturing Model: T47 -> SRAM Type: ACB Netto gewicht (g): 123 Trapasconversie: T47 -> 24mm Lagerkwaliteit: Angular Contact B…
    160,72
    Wheels manufacturing Wheels mfg trapas t47 sram 22/24mm acb zwart
    Wheels manufacturing Wheels mfg trapas t47 sram 22/24mm acb zwart
    T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have internal bearings, and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 73mm - 132mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 24mm, Weight: 123g, Packaged for retail display. Artikelnummer: T47-BB-SRAM-AC EAN: 811079024251 Merken: Wheels Manufacturing Model: T47 -> SRAM Type: ACB Netto gewicht (g): 123 Trapasconversie: T47 -> 24mm Lagerkwaliteit: Angular Contact B…
    161,95
    Wheels mfg trapas t47 outboard bb30 acb zwart
    Wheels mfg trapas t47 outboard bb30 acb zwart
    T47 threaded BB cups for T47 frames and 30mm diameter spindle cranks. Cups have outboard bearings, and can be used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 68mm - 100mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 30mm, Weight: 149g, Packaged for retail display. Artikelnummer: T47-OUT-30MM-AC EAN: 811079024220 Merken: Wheels Manufacturing Model: T47 OUTBOARD -> BB30 Type: ACB Netto gewicht (g): 149 Trapasconversie: T47 -> 30mm Lagerkwaliteit: Angular Con…
    160,72
    Wheels manufacturing Wheels mfg trapas t47 outboard shimano 24mm acb zwart
    Wheels manufacturing Wheels mfg trapas t47 outboard shimano 24mm acb zwart
    T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 68mm - 100mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 24mm, Weight: 123g, Packaged for retail display. Artikelnummer: T47-OUT-SHIM-AC EAN: 811079024268 Merken: Wheels Manufacturing Model: T47 OUTBOARD -> SHIMANO Type: ACB Netto gewicht (g): 123 Trapasconversie: T47 -> 24mm Lagerkwaliteit: A…
    160,72
    Wheels manufacturing Wheels mfg trapas t47 outboard shimano 24mm acb zwart
    Wheels manufacturing Wheels mfg trapas t47 outboard shimano 24mm acb zwart
    T47 threaded BB cups for T47 frames and 24mm diameter spindle cranks. Cups have outboard bearings, and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bearings: Enduro Angular Contact, Color: Black, Bottom Bracket/Frame Interface: T47, Bottom Bracket Shell Width (mm): 68mm - 100mm, Bottom Bracket Shell I.D.: 47x1.0mm Threaded, Crank Spindle Diameter: 24mm, Weight: 123g, Packaged for retail display. Artikelnummer: T47-OUT-SHIM-AC EAN: 811079024268 Merken: Wheels Manufacturing Model: T47 OUTBOARD -> SHIMANO Type: ACB Netto gewicht (g): 123 Trapasconversie: T47 -> 24mm Lagerkwaliteit: A…
    161,95
    Wheels manufacturing Wheels mfg trapas pressfit 30 threaded abec 3 zwart
    Wheels manufacturing Wheels mfg trapas pressfit 30 threaded abec 3 zwart
    The new PF30 Threaded bottom bracket will give you all of the same benefits as our well-loved original PF30 BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Bearings: Enduro ABEC-3 Color: Black, Bottom Bracket/Frame Interface: PF30, BB386EVO, Specialized Carbon OSBB, BBRight™ Press Fit, Bottom Bracket Shell Width (mm): 61mm to 86.5mm, Bottom Bracket Shell I.D.: 46mm, Crank Spindle Type: BB30, Crank Spindle Diameter: 30mm, Weight: 98g, Packaged for retail display, Will accept 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims. Artikelnummer: PF30-THD-BB EAN: 811079022134 Merken: Wheels Manufacturing Mode…
    164,95
    Wheels manufacturing Wheels mfg trapas pressfit 30 threaded abec 3 zwart
    Wheels manufacturing Wheels mfg trapas pressfit 30 threaded abec 3 zwart
    The new PF30 Threaded bottom bracket will give you all of the same benefits as our well-loved original PF30 BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). Bearings: Enduro ABEC-3 Color: Black, Bottom Bracket/Frame Interface: PF30, BB386EVO, Specialized Carbon OSBB, BBRight™ Press Fit, Bottom Bracket Shell Width (mm): 61mm to 86.5mm, Bottom Bracket Shell I.D.: 46mm, Crank Spindle Type: BB30, Crank Spindle Diameter: 30mm, Weight: 98g, Packaged for retail display, Will accept 24mm and 24/22mm cranksets using Wheels Mfg. adapter shims. Artikelnummer: PF30-THD-BB EAN: 811079022134 Merken: Wheels Manufacturing Mode…
    163,34

    Klanten-reviews van Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cycplus Balhoofdcuppers 11/2" oversz. Cyclus 720181

    Productomschrijving

    Headset press 1.5": With this tool the top and the bottom head cup will be pressed into the steerer tube simultaneously. Scope of delivery: - tool holder with T-handle - trapezoidal thread spindle 360mm - press bush pair - threaded sleeve - thrust bearing. Preparation: Screw the trapezoidal thread spindle with the side, which has a fine thread, into the tool holder. Put the thrust bearing and then one of the press bushes on the spindle. Use: Place the top head cup on the press bush and insert the tool into the steerer tube. Place the bottom head cup on the other press bush and put both of them on the spindle of the tool. Afterwards screw the threaded sleeve on the trapezoidal therad of the spindle. Rotate the tool holder and start to press the head cups. Pay attention, that the cups are not getting jammed during the work. Before you begin to press the head cups, check the diameter tolerance of the cup seating in the frame. You might need to correct the size by milling and facing the steerer tube first. Use corresponding head tube facing tool (code: 720147). Tip: Put some lubricant on the head cups to be pressed. It will make the work easier and safe the tool.

    Artikelnummer: 7720181 EAN: 8590831240246 Merken: Cyclus Type gereedschap: Balhoofd Netto gewicht (g): 2630 Kleur. BlauwZilver

    Productspecificaties

    Artikelnummer(s)
    Brand
    Cycplus
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.