webshop.nl

Verlanglijstje

Rohloff speedhub flange support rings

Meer Rohloff
Meer Rohloff in Sluitringen

Rohloff speedhub flange support rings

0
Product Description Make the flange even more stable: Flange Support Rings by Rohloff Since October 2017, anodised aluminium flange rings have been part of every new Speedhub. For long-lasting enjoyment with the Rohloff gear hub, Rohloff always recommends using the flange rings with the matching butted Speedhub spokes (2.9 mm arc length). The use o...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Alle aanbiedingen van dit product

    Verkoper
    Bezorging
    Prijs
    Fietsaccessoires.nl logo
    Fietsaccessoires.nl
    2 dagen
    €6,95
    €35,99

    Anderen bekeken ook

    Rohloff speedhub flange support rings
    Rohloff speedhub flange support rings
    Product Description Make the flange even more stable: Flange Support Rings by Rohloff Since October 2017, anodised aluminium flange rings have been part of every new Speedhub. For long-lasting enjoyment with the Rohloff gear hub, Rohloff always recommends using the flange rings with the matching butted Speedhub spokes (2.9 mm arc length). The use of flange rings can ensure that the Speedhub does not cause any problems on the flange. The rings prevent the spoke from tearing out in the event of a flange break. This is especially useful for extreme use on tandems, touring bikes, e-bikes, cargo and for riders over 100 kg. On hubs with older serial numbers, both spoke flanges of the Speedhub are the same, so two identical flange rings must be used on the right and left (small/small). Hubs with a higher serial number have a raised flange only on the cover side (left), so these hubs need two different flange rings (small/large). The " Made in Germany" lettering on the housing of the Speedhub …
    35,99
    Rohloff speedhub brake rotor
    Rohloff speedhub brake rotor
    Product Description They pack a punch: special Brake Rotors by Rohloff The Rohloff Speedhub 500/14 has a 52 mm centre diameter for the brake rotor mount and a stable 4-bolt mount on a 65 mm bolt circle diameter. Due to the special 4-bolt mount, Rohloff special brake rotors are required to ride a Rohloff Speedhub 500/14 with disc brakes. Matching brake rotors are available for almost all disc brake models. Technical Information:Mount:4-boltDiameter:160 mm, 180 mm, 203 mmDesign:1-pieceRotor Material:steelApproved For:Brake Compatibility:Shimano, Hayes, Grimeca, Avid, Formula or Magura (depending on version)Models:160 mm Shimano, Hayes, Formula, Avid: Diameter: 160 mmBrake Compatibility: Shimano, Hayes, Formula, AvidManufacturer Number: 8281 180 mm Shimano, Hayes, Formula, Avid, Grimeca: Diameter: 180 mmBrake Compatibility: Shimano, Hayes, Formula, AvidManufacturer Number: 8287 203 mm Hayes,Shimano, Avid: Diameter: 203 mmBrake Compatibility: Shimano, Hayes, AvidManufacturer Number: 8286 1…
    83,99
    Rohloff splined sprocket speedhub
    Rohloff splined sprocket speedhub
    Product Description Quick replacement: the Plug-In Sprockets for Speedhub by Rohloff Since 2016, Rohloff has equipped all hubs in the current series with a splined sprocket system. Turning or replacing a sprocket is then very easy without a chain whip or cassette removal tool. Due to the same component basis (screw connection), existing hubs can be retrofitted or converted with this splined system. When converting from screw-on to plug-in sprockets, please also order the Splined Carrier or, in special cases, Splined Carrier S. Rohloff offers a template to check for collisions between the frame strut and the sprocket. When using the plug-in sprocket system, the chain tensioner requires the long frame bolt. The use of a closed chain guard (Hebie etc.) must be checked individually for compatibility. Technical Information:Material:steelChainline:57 mmManufacturer's Notice:Due to the extended number of teeth, many chainring / sprocket combinations are possible. The permissible or desired t…
    31,99
    Rohloff oil of speedhub 500/14 oil set model 2024
    Rohloff oil of speedhub 500/14 oil set model 2024
    Product Description The Rohloff Oil of Speedhub 500/14 oil set for the maintenance of internally geared hubs The Oil of Speedhub 500/14 oil set from Rohloff contains cleaning oil and all-season oil for your internally geared hub. To ensure that it runs smoothly and without defects for a long time, you should change the oil every 5000 kilometres or once a year. Use the cleaning oil to remove abrasion and any water that may have penetrated the internally geared hub, and top up the gear oil to ensure that your drivetrain runs smoothly and quietly. If you need a syringe and hose to fill the hub as well as oil, take a look at the oil change kit from Rohloff. Note:Only Rohloff oils (gear oils/cleaning oils) may be filled into the Rohloff Speedhub 500/14. Filling with other liquids or additives can cause damage to transmission parts (e.g. plastic parts). Specifications:Flushing Oil: Designation:SpülölApplication:lubricant Speedhub Oil: Designation:Speedhub Oil GanzjahresölApplication:lubrican…
    26,99
    Gates cdx:exp rohloff spline rear belt drive sprocket
    Gates cdx:exp rohloff spline rear belt drive sprocket
    Gates CDX tandwiel achter 19 tands Rohloff Splined. Buitendiameter 64,85mm. Product Description This Gates rear belt drive sprocket from the CDX:EXP Expedition series for touring and off-road use has splined teeth for Rohloff Speedhub gear hubs in combination with the Splined Carrier L. It features an enlarged wear surface and is made of robust stainless steel. Guidelines for Replacing E-bike Components:Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked E-bikes/pedelecs with pedal assistance. Specifications:Application:City & Touring, Cross CountryMount:Rohloff SplineTeeth:19 t, 20 t, 22 tTechnical Information:Width of the teeth:12 mmTooth division:11 mmMounting web thickness:2.0 mmOffset:1.3 mm (assembly surface), 2.3 mm (centre line)Material:stainless steelCompatibility:Rohloff Speedhub 500/14Rohloff Speedhub 500/14 XLthe Rohloff Splined Carrier L is absolutely necessary for assemblyUse of a snubber mandatory (prev…
    103,99
    Rohloff hub cable set for internal gear mech
    Rohloff hub cable set for internal gear mech
    Product Description Always carry the Rohloff Hub Cable Set with you on long-distance journeys This repair kit is used for internal gear mechs on the one-piece axle ring (used until the model change at the beginning of 2003). The one-piece axle ring can be recognised by the fact that the axle plate is fastened with 6 axle plate screws. The two train guides are firmly pressed into the axle ring. When changing the shift cable, the axle ring with cable pulley must be dismantled. Manufacturer Number:8271 Contents:1 x Rohloff 0.9 mm special shifter cable2 x rubber boot4 x zip ties2 x O-ring Manufacturer: Rohloff AG Mönchswiese 11 34233 Fuldatal Germany service@rohloff.de
    22,99

    Klanten-reviews van Rohloff speedhub flange support rings

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Rohloff speedhub flange support rings

    Productomschrijving

    Product Description Make the flange even more stable: Flange Support Rings by Rohloff Since October 2017, anodised aluminium flange rings have been part of every new Speedhub. For long-lasting enjoyment with the Rohloff gear hub, Rohloff always recommends using the flange rings with the matching butted Speedhub spokes (2.9 mm arc length). The use of flange rings can ensure that the Speedhub does not cause any problems on the flange. The rings prevent the spoke from tearing out in the event of a flange break. This is especially useful for extreme use on tandems, touring bikes, e-bikes, cargo and for riders over 100 kg. On hubs with older serial numbers, both spoke flanges of the Speedhub are the same, so two identical flange rings must be used on the right and left (small/small). Hubs with a higher serial number have a raised flange only on the cover side (left), so these hubs need two different flange rings (small/large). The " Made in Germany" lettering on the housing of the Speedhub serves to distinguish which flange rings must be used. Models:small/small: Distinguishing Hub Feature: " Made in Germany" lettering not underlinedCompatible Serial Numbers:

    Productinformatie

      Productspecificaties

      Artikelnummer(s)
      EAN
      4250307405701
      Brand
      Rohloff

      Verken gerelateerde categorieën

      SluitringenKlusaccessoiresKlussen
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.