webshop.nl

Verlanglijstje

jablotron 100 Ja-192J RFID tag

Meer Jablotron 100
Meer Jablotron 100 in Dieren ID-tags

jablotron 100 Ja-192J RFID tag

0
Jablotron JA-192J RFID tag The JA-191J RFID tag is a chip key that can be used to switch on and off the JA-100 alarm system from Jablotron. Product highlights: * To activate/deactivate the alarm system * Without code entry * No more hassle due to forgetting the PIN code * Simply hold it in front of the control panel * Functions completely cont...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Webshops met dit product

    Webshop
    Bezorging
    Prijs
    Mr-beveiliging.nl logo
    Mr-beveiliging.nl
    niet bekend
    €7,62

    Anderen bekeken ook

    JA-112E BUS RFID bedienpaneel
    JA-112E BUS RFID bedienpaneel
    JA- 112E Bus RFID Control Panel The JA - 112E is an access module with an RFID reader to operate a JA- 100 alarm system . Contains an operating segment and , if required , can be equipped with up to 20 control segments . The JA- 112E allows easy operation of the system using interlocking segments . Communicates and is powered by the bus . The module has an energy saving function . The module is addressable and occupies a position in the alarm system . specifications Power control panel bus ( 9 ... 15 V ) Power consumption in standby ( latent) 10 mA Power consumption for cable selection 15 mA Current for each segment 0.5 mA RFID frequency 125 kHz Operating temperature -10 to + 40 ° C Environment EN 50131-1 . general indoor Classification grade 2 according to EN 50131-1 , EN 50131-3 Complies with ETSI EN 300330 , EN 50130-4 , EN 55022 , EN 60950-1 Can be operated to the ERC REC 70-03
    107,90
    jablotron 100 JA-194J-RE RFID tag
    jablotron 100 JA-194J-RE RFID tag
    De JA-194J RFID tag is een chipsleutel welke kan worden gebruikt voor het in en uitschakelen van JA-100 alarmsysteem van Jablotron. Product highlights: * Voor het activeren/deactiveren van alarmsysteem * Zonder code-invoer * Geen gedoe meer door het vergeten van de pincode * Eenvoudig voor het bedieningspaneel houden * Functioneert volledig contactloos * Meerdere chipsleutels programmeerbaar De RFID chipsleutel is een optioneel accessoire voor het contactloos schakelen van alarmcentrales en vervangt het invoeren van codes. Daarmee vindt de duidelijke autorisatie van de gebruiker aan de alarminstallatie plaats. Gebruiksvriendelijk: Voor het activeren of deactiveren houdt u de chip eenvoudig voor de het bedieningspaneel. De gebruiker hoeft geen pincode meer te onthouden, wat de autorisatie (authentificatie) aan de installatie aanzienlijk vereenvoudigt. Deze is bestemd voor het eenvoudig en comfortabel activeren en deactiveren van het alarmsysteem. Installatie en programmering: De c…
    11,98
    JA-152J-MS II, MultiSystem afstandsbediening, 2 knops
    JA-152J-MS II, MultiSystem afstandsbediening, 2 knops
    JA-152J-MS II, MultiSystem remote control, 2 buttons The JA-152J remote control is designed to remotely arm/disarm the system, activate panic alarms and control equipment. The key ring has a handy built-in "child lock". The remote control works like a segment of a Jablotron 100 control panel. It monitors and displays the battery and system status by acoustic and optical indication. The child lock prevents accidental activation of the remote control. Pressing 2 buttons activates a panic alarm. Because it is a "2-way" wireless remote control, you can see the status of the system on the handheld transmitter itself. * Renewed model * The control is equipped with both optical and acoustic indication of the execution of a command * The operation can be registered on multiple systems or multi-function relays * It checks the battery status and indicates if the battery is empty * If a key is held down, an activation is sent every second. This function can be used, for example, to send the …
    74,28
    ja-182j 2-knop afstandsbediening
    ja-182j 2-knop afstandsbediening
    Jablotron JA-182J 2-button remote control The JA-182J is designed to remotely arm or disarm the alarm system, activate panic alarms and control other devices. The user can independently control other devices such as a garage door or the partial setting mode of the control panel. The remote control provides a useful lock function button. A simple action can make the remote control unresponsive to any buttons so that no buttons can be pressed when it is in your pocket. By pressing 2 buttons simultaneously you ensure that a panic alarm is activated in the control panel. The remote control also checks its own battery voltage and reports a low value wirelessly to the alarm system. Specifications : * Power supply: Lithium battery type CR2032 (3 V) * Battery life: approx. 4 years (5 x/day) * Communication protocol: 868 MHz * Wireless range: 30 m * Complies with: ETSI EN 300 220, EN 55022, EN 50130-4, EN 60950-1
    66,86
    Jablotron 100 ja-190j RFID kaart
    Jablotron 100 ja-190j RFID kaart
    Jablotron JA-190J RFID kaart De JA-190J RFID kaart is een chipsleutel welke kan worden gebruikt voor het in en uitschakelen van JA-100 alarmsysteem van Jablotron.Product highlights: * Voor het activeren/deactiveren van alarmsysteem * Zonder code-invoer * Geen gedoe meer door het vergeten van de pincode * Eenvoudig voor het bedieningspaneel houden * Functioneert volledig contactloos * Meerdere chipsleutels programmeerbaar De RFID chipsleutel is een optioneel accessoire voor het contactloos schakelen van alarmcentrales en vervangt het invoeren van codes. Daarmee vindt de duidelijke autorisatie van de gebruiker aan de alarminstallatie plaats.Gebruiksvriendelijk: Voor het activeren of deactiveren houdt u de chip eenvoudig voor de het bedieningspaneel. De gebruiker hoeft geen pincode meer te onthouden, wat de autorisatie (authentificatie) aan de installatie aanzienlijk vereenvoudigt. Deze is bestemd voor het eenvoudig en comfortabel activeren en deactiveren van het alarmsysteem.Instal…
    7,62
    JA-110B akoestische glasbreuk detector
    JA-110B akoestische glasbreuk detector
    Jablotron 100 JA-110B The JA-110B glass break BUS detector detects the breaking of glass windows or surfaces. The detector uses dual detection technology (air pressure and sound analysis). It responds to the breaking of any type of glass. The sensitivity of the detector is adjustable. The detector communicates via the BUS of the control panel and is also powered by the BUS. The alarm memory function is an optional setting, this function makes indication and locating an alarm very easy. It is possible to assign the detector to a zone and it only occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be switched off using the code control panel. • Power supply: via the control panel BUS, 12V (9 - 15 V) • Standby power consumption: 5 mA • Installation height: 2.5 meters above the ground • Detection range: up to 9 m • Dimensions: 40 x 100 x 22 mm • Safety class 2 in accordance with EN 50131-1, EN 50131-2-7…
    77,32
    Ja-188j Draadloze paniek/hulp knop
    Ja-188j Draadloze paniek/hulp knop
    Jablotron JA-188J wireless panic/help button The JA-188J can be used to generate a panic/medical alarm or it can also be used to control the control panel, wireless doorbell or other devices. The button functions are programmable. Can be registered with the control panel, AC and UC receivers (relay to be activated) and the siren (bell function). It provides tamper sensors and monitors the voltage of its battery. The response to the key activation is optional. The general response is a panic alarm or switching the system on or off (selectable). Other responses can be assigned in the service mode of the control panel. The battery-powered wireless button communicates via the wireless radio protocol. Specifications : * Power supply: lithium battery (3.6V ½ AA / 1.2 Ah) * Battery life: 2 years * Communication protocol: 868 MHz * Wireless range: up to 30 meters * Dimensions: 80 x 80 x 29 mm * Safety class 2 in accordance with EN 50131-1, EN 50131-5-3
    66,86
    JA-110P BUS PIR bewegingsdetector
    JA-110P BUS PIR bewegingsdetector
    Jablotron 100 JA-110P The JA-110P is a BUS PIR motion detector designed for indoor protection. It detects the movement of an object with the temperature of the human body. The detection properties can be optimized using alternative lenses, such as the: JS-7904 corridor lens, JS-7906 horizontal cap lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. The alarm memory function is an optional setting, this function makes indication and locating an alarm very easy. It is possible to assign the detector to a zone and it only occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be switched off using the code control panel. • Power supply: via the control panel BUS, 12V (9 - 15 V) • Standby power consumption: 5 mA • Installation height: 2.5 meters above the ground • Detection range: 110°/ 12 m (with a standard lens ) • Dimensions: 60 x 97 x 52 mm • Safet…
    50,23
    Cilinderslot Condor messing
    Cilinderslot Condor messing
    M&C condor cilinderslot messing The M&C Condor cylinder lock offers excellent security for your door. This cylinder lock is equipped with the latest technologies in the field of burglary protection and has an SKG 3-star quality mark, which means that it meets the highest requirements in the field of burglary resistance. The M&C Condor cylinder locks are equipped with a hardened steel bridge that protects the cylinder against drilling and breaking the cylinder. The lock also has drill protection and an anti-strike pick function, making it very difficult for burglars to manipulate the lock. Key from M&C Condor The key that belongs to the M&C Condor series is a reversible key with a raised profile, making it much more difficult to copy the key than a normal key. The key can be inserted into the lock on both sides and is much less sensitive to wear than the cutting key. Due to the raised profile of the key, the M&C Condor cylinder lock offers extra security and is more difficult to manipul…
    75,65
    JA-160PC Draadloze PIR met kleurencamera
    JA-160PC Draadloze PIR met kleurencamera
    The JA-160PC The JA-160PC camera takes color photos with a resolution of up to 640 x 480 pixels by detecting human movement while the system is turned on. The camera is equipped with a visible flash for taking photos in the dark. The images are stored in the internal memory of the detector and then they are transmitted to the control panel. From the control panel they can be sent to an external storage device, monitoring station and a user. The detector can also take a photo on command if it is necessary (e.g. fire alarm confirmation). In the MyJablotron App the photos are also an option to take a photo remotely. • Power supply: 2 AA (LR6) 1.5 V 2400 mAh alkaline batteries • Typical lifespan: approx. 2 years (1 activation takes 1 series of photos per day) • Recommended mounting height: 2.5 m above the floor • Detection angle / detection range : 55 ° / 12 m (basic lens) • Flash range: max. 3 meters • Camera resolution: LQ 320 x 240; HQ 640 x 480 pixels • Photo format LQ / HQ (typical): …
    272,72

    Klanten-reviews van jablotron 100 Ja-192J RFID tag

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over jablotron 100 Ja-192J RFID tag

    Productomschrijving

    Jablotron JA-192J RFID tag The JA-191J RFID tag is a chip key that can be used to switch on and off the JA-100 alarm system from Jablotron. Product highlights: * To activate/deactivate the alarm system * Without code entry * No more hassle due to forgetting the PIN code * Simply hold it in front of the control panel * Functions completely contactless * Multiple chip keys programmable The RFID chip key is an optional accessory for contactless switching of alarm centers and replaces entering codes. This provides clear authorization of the user to the alarm system. User-friendly : To activate or deactivate, simply hold the chip in front of the control panel. The user no longer has to remember a PIN code, which considerably simplifies the authorization (authentication) during the installation. This is intended for simple and comfortable activation and deactivation of the alarm system. Installation and programming : The chip key is programmed in the alarm center , the authorization is then programmed directly at the center. The RFID key obtains the voltage for code transmission through the radio field of the receiver, it does not require its own battery.

    Productspecificaties

    Artikelnummer(s)
    Brand
    Jablotron 100

    Verken gerelateerde categorieën

    Dieren ID-tagsDierenverzorgingDieren
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.