webshop.nl

Verlanglijstje

Cyclus Tools quick release nut - tr 16x3
Cyclus Tools quick release nut - tr 16x3
Cyclus Tools quick release nut - tr 16x3

Meer Cyclus Tools
Meer Cyclus Tools in Momentsleutels

Cyclus Tools quick release nut - tr 16x3

0
Product Description The quick-release nut makes it easier to work with all Cyclus Tools press and milling tools. Pressing or milling becomes much more effective, as the time-consuming turning in and out of the threaded block is no longer necessary. This saves valuable time. The thread is opened by pressing the quick-release nut together. This allow...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Alle aanbiedingen van dit product

    Verkoper
    Bezorging
    Prijs
    Fietsaccessoires.nl logo
    Fietsaccessoires.nl
    2 dagen
    €6,95
    €152,99
    Fietsenwinkel.be logo
    Fietsenwinkel.be
    niet bekend
    niet bekend
    €143,99

    Anderen bekeken ook

    Cyclus Tools quick release nut - tr 16x3
    Cyclus Tools quick release nut - tr 16x3
    Product Description The quick-release nut makes it easier to work with all Cyclus Tools press and milling tools. Pressing or milling becomes much more effective, as the time-consuming turning in and out of the threaded block is no longer necessary. This saves valuable time. The thread is opened by pressing the quick-release nut together. This allows the threaded block to be slid over the threaded rod as needed. When closed, the quick-release nut functions as a threaded nut. Ample thread turns and the robust design of the quick-release nut also allow high contact pressure when pressing. The ergonomic shape allows comfortable and safe work. You can retrofit the quick-release nut to existing tools with threaded rods. Features:tough fine-cast workshop designseveral threads allow high contact pressureergonomic handles for safe workingsuitable for all press and milling tools from Cyclus Toolsquick-release nut open = thread deactivatedquick-release nut closed = function as threaded nutManufac…
    152,99
    Cyclus Tools face milling cutter for bottom bracket shells with holder
    Cyclus Tools face milling cutter for bottom bracket shells with holder
    Product Description The face milling tool for bottom bracket shells allows you to mill flat bottom bracket faces as a basis for the later assembly of the bottom bracket. Features:max. milling width: 9 mmmax. case diameter: 44 mmT-handle holder with face milling cutter holderface milling cutter singleguide bushing BSA left/right threadguide bushing with Italian and French threadsthreaded rod with threaded socket and springsuitable for bottom bracket shellsManufacturer Number: 720007 Note: To avoid overstressing, even pressure must be applied to the cutter with the help of the guide, spring and threaded sleeve. Additionally, you should pay attention to the housing width of the bottom bracket to be installed during the milling process. Remove any chrome layers before cutting to avoid excessive wear to the cuts. Additionally, suitable cutting oil should be used. Contents:1 x Cyclus Tools face milling cutter1 x mounts Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn German…
    241,99
    Cyclus Tools Grs cyclus trapasdraadsnij ijzer bsa set a 2
    Cyclus Tools Grs cyclus trapasdraadsnij ijzer bsa set a 2
    Product Description Compatibility: Cyclus Tools threaded cutter Features:suitable for the Cyclus Tools thread cutting toolserves to recut the bottom bracket threadoptionally available in BSA or ITA versionManufacturer Numbers:ITA:720022BSA:720028Contents:ITA: 2 x Cyclus Tools right threading die BSA: 1 x Cyclus Tools right threading die1 x Cyclus Tools left threading die Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu Cyclus Artikelnummer: 664560 EAN-code: 8590831320115
    109,99
    Cyclus Tools Inslagwerktuig cyclus ahead prop
    Cyclus Tools Inslagwerktuig cyclus ahead prop
    Om te controleren van de plek van de ster-moer. Cyclus inslaggereedschap voor A-head plug 1"en 1 1/8". Garandeert het exact inbrengen van de A-head plug in de juiste stand. Draai de passende bus (1" of 1 1/8") met de hand vast in het inslaggereedschap. Schroef nu de te monteren plug met behulp van het geboorde gat tot aan de aanslag op de bout. Zet het gereedschap op de voorvorkbuis en sla het met een hamer tot aan de aanslag in. Door het naar links draaien van de draaischijf is het gereedschap vervolgens te verwijderen van de voorvork. Product Description The push-in tool guarantees you an exact insertion of the Ahead claw into the steerer tube with a previously defined impact depth. Features:guarantees exact insertion of the Ahead claw into a defined impact depthsuitable for 1" and 1 1/8"Manufacturer Number: 720088 Contents:1 x Cyclus Tools push-in tool1 x Cyclus Tools threaded bushing, 1"1 x Cyclus Tools threaded bushing, 1 1/8" Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55…
    65,99
    Cyclus Tools Inslagwerktuig cyclus ahead prop
    Cyclus Tools Inslagwerktuig cyclus ahead prop
    Om te controleren van de plek van de ster-moer. Cyclus inslaggereedschap voor A-head plug 1"en 1 1/8". Garandeert het exact inbrengen van de A-head plug in de juiste stand. Draai de passende bus (1" of 1 1/8") met de hand vast in het inslaggereedschap. Schroef nu de te monteren plug met behulp van het geboorde gat tot aan de aanslag op de bout. Zet het gereedschap op de voorvorkbuis en sla het met een hamer tot aan de aanslag in. Door het naar links draaien van de draaischijf is het gereedschap vervolgens te verwijderen van de voorvork. Product Description The push-in tool guarantees you an exact insertion of the Ahead claw into the steerer tube with a previously defined impact depth. Features:guarantees exact insertion of the Ahead claw into a defined impact depthsuitable for 1" and 1 1/8"Manufacturer Number: 720088 Contents:1 x Cyclus Tools push-in tool1 x Cyclus Tools threaded bushing, 1"1 x Cyclus Tools threaded bushing, 1 1/8" Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55…
    65,99
    Cyclus Tools press ring 1 1/8" for semi ihs headset
    Cyclus Tools press ring 1 1/8" for semi ihs headset
    Cyclus persbus balhoofd semi geintergreerd geschikt voor snelspanklauw 720953 Product Description This press ring is suitable for pressing headset cups into a head tube with the Semi IHS dimension. These press rings are designed to be used with the quick-release nut. This ensures professional, safe and above all fast work. For professional use, you need the suitable press-in spindle for headsets incl. the compatible counterholder. Ideally, this should be the quick release nut. Compatibility:24084 Cyclus Tools snap.in - press spindle for headset - SN.10-S24082 Cyclus Tools holder for head tube press tool - generation 22402300 Cyclus Tools press tool for headset 1" & 1 1/8"2402200 Cyclus Tools head tube press tool, 500 mm for frames with extra long head tubes2402400 Cyclus Tools press tool for 1 1/2" headset2402500 Cyclus Tools press tool for semi-integrated headsetsManufacturer Number:2408202 Contents:1 x Cyclus Tools 1 1/8" press ring Semi IHS Manufacturer: Cyclus Tools Julius-Kruttsch…
    35,99
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    1-1/8 inch compleet met snij-ijzer Cyclus vorkbuissnijwerktuig, 1 1/8 inch compleet met snij-ijzer Product Description The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube. Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread. Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork. Features:suitable for recutting the thread on the fork tubewith matching dieoptionally as 1" or 1 1/8"Manufacturer Numbers:1":720001 sold-out1 1/8":720002 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool. Contents:1 x Cyclu…
    190,99
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    1-1/8 inch compleet met snij-ijzer Cyclus vorkbuissnijwerktuig, 1 1/8 inch compleet met snij-ijzer Product Description The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube. Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread. Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork. Features:suitable for recutting the thread on the fork tubewith matching dieoptionally as 1" or 1 1/8"Manufacturer Numbers:1":720001 sold-out1 1/8":720002 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool. Contents:1 x Cyclu…
    190,99
    Cyclus Tools Press fit inpers spindel g2 zonder ringen - cyclus 720318
    Cyclus Tools Press fit inpers spindel g2 zonder ringen - cyclus 720318
    Product Description The proven press tool for press-fit bearing cups has been improved once again! Compared to Generation 1 (Art. No.: 720312), slipping or even losing the axial deep groove ball bearing is impossible. This eliminates the need for horizontal mounting of the inner bearing. Note: When pressing, you must ensure that the press rings are only pushed onto the outer bearing ring. Pay attention to the pressing torque for the bearing or bearing or bearing cup specified by the manufacturer. Features:can be used with various press-fit ring setsnot incl. press ringsManufacturer Number:720318 Contents:1 x Cyclus Tools Press Fit G2 press spindleincl. threaded socketwithout press-fit rings Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    109,99
    Cyclus Tools Voorvork-conus trekker cyclus 720137
    Cyclus Tools Voorvork-conus trekker cyclus 720137
    Product Description Use the crown race puller to remove the crown race of the headset from the crown race seat. The advantage of the crown race puller is that you do not scratch the fork when removing the crown race and you do not damage the headset cone ring. The puller can be used universally. It is suitable for all types of headsets or forks (e.g. suspension forks, IHS forks, etc.). Features:suitable for removing the crown raceuniversally usableManufacturer Number: 720137 Contents:1 x Cyclus Tools 1" extractor claw1 x Cyclus Tools 1 1/8" extractor claw1 x Cyclus Tools clamping sleeve1 x Cyclus Tools threaded socket1 x Cyclus Tools turning spindle Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    477,99

    Klanten-reviews van Cyclus Tools quick release nut - tr 16x3

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cyclus Tools quick release nut - tr 16x3

    Productomschrijving

    Product Description The quick-release nut makes it easier to work with all Cyclus Tools press and milling tools. Pressing or milling becomes much more effective, as the time-consuming turning in and out of the threaded block is no longer necessary. This saves valuable time. The thread is opened by pressing the quick-release nut together. This allows the threaded block to be slid over the threaded rod as needed. When closed, the quick-release nut functions as a threaded nut. Ample thread turns and the robust design of the quick-release nut also allow high contact pressure when pressing. The ergonomic shape allows comfortable and safe work. You can retrofit the quick-release nut to existing tools with threaded rods. Features:tough fine-cast workshop designseveral threads allow high contact pressureergonomic handles for safe workingsuitable for all press and milling tools from Cyclus Toolsquick-release nut open = thread deactivatedquick-release nut closed = function as threaded nutManufacturer Number:720939 Contents:1 x Cyclus Tools Tr 16x3 quick release nut Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu

    Productinformatie

      Productspecificaties

      Artikelnummer(s)
      EAN
      4250968701365
      Brand
      Cyclus Tools

      Verken gerelateerde categorieën

      MomentsleutelsGereedschapKlussen
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.