webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

2080176 (2 Stück) - Main line branch terminal HLAK 25-1/6M2 brown, 2080176 - Promotional item

Meer Pollmann
Meer Pollmann in Klussen

2080176 (2 Stück) - Main line branch terminal HLAK 25-1/6M2 brown, 2080176 - Promotional item

EAN: 4025221401289 - manufacturer-number: 2080176 - 1 x brown / brown / brune, main line branch terminals 1/6 M2, mini-modular, can be stacked, mounting on 35 mm mounting rail in accordance with EN 60715, color coding corresponding to valid wire colors, Ui = 1000 V, VDE certified, tin-plated terminal block. Suitable for aluminum conductors. The sma...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    7,86

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    2080177 (2 Stück) - Main line branch terminal HLAK 25-1/6M2 black, 2080177 - Promotional item
    2080177 (2 Stück) - Main line branch terminal HLAK 25-1/6M2 black, 2080177 - Promotional item
    EAN: 4025221401296 - manufacturer-number: 2080177 - 1 x black / black / noir, main line branch terminals 1/6 M2, mini-modular, can be stacked, mounting on 35 mm mounting rail in accordance with EN 60715, color coding corresponding to valid wire colors, Ui = 1000 V, VDE certified, tin-plated terminal block. Suitable for aluminum conductors. The small size means that less space is required in the distribution. 35/25 mm2 outlets can now be implemented where conventionally only 25/16 mm2 were possible. The mini-modular stackability leads to a previously unknown variability. Depending on requirements, the colour-coded terminals can be combined and removed again with a tool.PV suitability: cable entries with insulating collars enable the terminal to be used up to a nominal voltage of 1000 V in accordance with VDE 0613 / EN 60998. The terminals are finger-safe on all sides, even without a connected conductor . For use with finely stranded conductors, the terminal depth is adapted to the usual…
    7,86
    05105377 - PHLAK2526GN trunk line branch terminal, 05105377 - Promotional item
    05105377 - PHLAK2526GN trunk line branch terminal, 05105377 - Promotional item
    EAN: 4016705153770 - manufacturer-number: 05105377 - Conductor terminals for mounting on DIN rails, eg for installation small distributors and counters according to VDE 0603, 25/16 mm². Stackable. Installation on 35 mm mounting rails in accordance with EN 60715 / EN 50022. Small installation distributors and meter positions AC 400V. Main line branch terminals VDE 0603-2. Connection material for low-voltage circuits for household and similar purposes. VDE 0613, Part 1 / EN 60998-1. Color coding according to valid wire colors. Insulation voltage: 1000 V AC / DC for: overvoltage category III (Uimp = 8 kV, fixed installation). Pollution degree 2 (e.g. distributor installation). VDE certified (VDE 0613, Part 1 / EN 60998-1). Suitable for Cu and Al conductors. Terminal Body: Brass (Tin Plated). Clamping screws: steel, galvanized. Insulating housing: plastic (polyamide). Impact resistant. Flame retardant. Halogen free. Line connection: main line: 1.5 - 25 mm² solid/stranded, 2.5 Nm, 1.5 - 16 …
    6,30
    2CDS251001R0165 - Circuit breaker S201-B16 B16A 1-pole 6kA, 2CDS251001R0165 - Promotional item
    2CDS251001R0165 - Circuit breaker S201-B16 B16A 1-pole 6kA, 2CDS251001R0165 - Promotional item
    EAN: 4016779463904 - manufacturer-number: 2CDS251001R0165 - The S 200 series circuit breakers protect cables and lines from overload and short circuits in accordance with DIN VDE 0100-430 and DIN VDE 0100-530. They meet the building regulations DIN VDE 0641-11 or IEC/EN 60898-1, DIN VDE 0660-101 or IEC/EN60947-2 and UL1077. Its patented connection terminal ensures simple and safe contacting and handling by means of a pressure plate. For better visibility when wiring, the connection opening for cables is above the connection opening for the busbar. Conductor cross-sections up to 35 mm² can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous approvals make the S 200 fit for worldwide use. Before delivery, each device is subjected to three intensive tests for quality and performance. - 2CDS251001R0165
    2,64
    1SCA104934R1001 - Switch disconnector OT40F4C, 1SCA104934R1001 - Promotional item
    1SCA104934R1001 - Switch disconnector OT40F4C, 1SCA104934R1001 - Promotional item
    EAN: 6417019390741 - manufacturer-number: 1SCA104934R1001 - ABBs range of manually operated diverter switches is an optimal solution for a wide range of applications. The diverter switches switch currents from 16 A to 3200 A and at voltages of up to 690 V AC. Despite their high performance, the switches ensure safe operation thanks to a large number of integrated safety functions. Thanks to its compact design, the series enables optimal use of space. The diverter switch from ABB is available in two different versions. These differ in the type of switching: open switching (I-0-II) and closed switching (I-I+II-II). In addition, the switches have IEC and UL approvals. ABB offers you a wide range of accessories for these switches, such as B. extension shafts, handles, auxiliary switches and terminal covers. In addition, an intelligent control unit can be combined with the switch to function as an ATS (Automatic Transfer Switch). Thus, the diverter switches can be used in the most demanding…
    95,89
    KU83LHE - Meter panel KU83LHE
    KU83LHE - Meter panel KU83LHE
    EAN: 3250613806293 - manufacturer-number: KU83LHE - BKE-A 3-phase universal basic version KU83LHE, version = eHZ, number of meter positions = 1, main switch rated current = 63 A, width = 178 mm, height = 220 mm, with mounting plate = no, color = white, RAL number = 9010, degree of protection (IP) = IP30, BKE-A, 3-phase, universal, centered, basic version, PU = 1 piece. Fastening and contacting device BKE-A with VDE symbol according to DIN VDE 0603-3-2 for accommodating the plug-in electronic household meter (eHZ) according to the FNN specifications, meter is arranged in the center, therefore ideally suited for transparent window cabinets, protection against accidental contact for the terminal strip area is by sealed the meter. BKE rated connection capacity per main terminal point for copper conductors 4-25 mm², rigid or finely stranded with wire end ferrule. Plug-in, voltage-mountable additional terminal points behind the eHZ meter for voltage tapping of uncounted and counted current o…
    100,85
    DSH ZP B2 SG TNC 255 - Combined arrester for power systems DSH ZP B2 SG TNC 255
    DSH ZP B2 SG TNC 255 - Combined arrester for power systems DSH ZP B2 SG TNC 255
    EAN: 4013364409842 - manufacturer-number: DSHZPB2SGTNC255 - Combined arrester TN-C DSH ZP B2 SG TNC 255, network type DC = no, network type TN-C = yes, network type TN-CS = no, network type TN-S = no, network type TT = no, number of poles = 3, lightning impulse current ( 10/350 µs) = 22.5 kA, highest continuous voltage AC = 255 V, nominal voltage AC = 230 V, protection level = 1.5 kV, follow current extinguishing capacity = 25 kA, specific energy (W / R) = 14.06 kJ / ohm , Mounting type = busbar, signaling on the device = optical, test class = type 1 and 2, blowing out = no, energy-coordinated protective effect to the end device = yes, protection type (IP) = IP30, combination arrester protective effect type 1 + type 2 for TNC systems (3 + 0 circuit) including overcurrent-protected 230 V power supply (N and L) each for RfZ / APZ acc. VDE-AR-N 4100, can be assembled completely without tools thanks to Click + Power connection technology for the 40 mm busbar system and push-in earthing ter…
    263,45
    N000402 - EIB KNX IP Router PoE
    N000402 - EIB KNX IP Router PoE
    manufacturer-number: N000402 - Note: The Power over Ethernet supply is standardized acc. to Standard PoE (IEEE 802.3af) and integrated via RJ45. We can recommend a PoE Ethernet Switch from Netgear, e.g. FS108P. The device disposes of 8 ports, four of which are equipped with Power over Ethernet (IEEE802.3af, 48 VDC). The IP Router, for example, can be connected to one of these four ports. As an alternative, power supply can be provided by means of screw connecting terminals at the upper side using a separate power supply unit (12-24V DC) or transformer (12-24V AC). Parallel power must be avoided! Caution when using managed Switches (Cisco or similar): With some Switches there can problems with the standard settings and the IP devices are not recognized. In this case make the following adjustment at the Switch: Full-Duplex-Mode Digit rate: 10 Megabit/s A blinking Ethernet LED at the IP Router or IP Interface indicates an existing link i.e. the digit rate and the mode have been set cor…
    273,07
    451210.009.19 - Ceiling-/wall luminaire 1x17W 451210.009.19
    451210.009.19 - Ceiling-/wall luminaire 1x17W 451210.009.19
    EAN: 4051859431114 - manufacturer-number: 451210.009.19 - LED moisture-proof luminaire 4000K BWM 451210.009.19, suitable for wall mounting = yes, suitable for pendant mounting = yes, suitable for ceiling mounting = yes, suitable for recessed mounting = no, suitable for surface mounting = yes, illuminant = LED not replaceable, with illuminant = yes, Suitable for continuous row configuration = no, suitable for VDU workstations according to EN 12464-1 = no, suitable for number of lamps = 1, socket = other, housing material = plastic, housing color = gray, cover material = opal plastic, grid design = without, voltage type = AC, nominal voltage = 220..240 V, control gear = LED control gear current-controlled, with control gear = yes, dimming 0-10 V = no, dimming 1-10 V = no, dimming DALI = no, dimming DMX = no, dimming DSI = no, dimming potentiometer (integrated in the device) = no, dimming GPRS = no, dimming LineSwitch = no, dimming manufacturer-specific = no, dimming mains voltage modulat…
    74,72
    N000401 - EIB KNX IP Interface PoE, with up to 5 tunneling connections
    N000401 - EIB KNX IP Interface PoE, with up to 5 tunneling connections
    manufacturer-number: N000401 - Note: The Power over Ethernet supply is standardized acc. to Standard PoE (IEEE 802.3af) and integrated via RJ45. We can recommend a PoE Ethernet Switch from Netgear, e.g. FS108P. The device disposes of 8 ports, four of which are equipped with Power over Ethernet (IEEE802.3af, 48 VDC). The IP interface, for example, can be connected to one of these four ports. As an alternative, power supply can be provided by means of screw connecting terminals at the upper side using a separate power supply unit (12-24V DC) or transformer (12-24V AC). Parallel power must be avoided! Caution when using managed Switches (Cisco or similar): With some Switches there can problems with the standard settings and the IP devices are not recognized. In this case make the following adjustment at the Switch: Full-Duplex-Mode Digit rate: 10 Megabit/s A blinking Ethernet LED at the IP Router or IP Interface indicates an existing link i.e. the digit rate and the mode have been set …
    139,02
    FDH62NP-230V+FTKB-rw - Radio receiver 868MHz FDH62NP-230V+FTKB-rw
    FDH62NP-230V+FTKB-rw - Radio receiver 868MHz FDH62NP-230V+FTKB-rw
    EAN: 4010312319826 - manufacturer-number: FDH62NP-230V+FTKB-rw - Radio actuator for extractor hood with radio sensor FDH62NP-230V + FTKB-rw, suitable for dimmer = no, suitable for pulse switch = yes, suitable for roller shutter switch = no, suitable for blind switch = no, suitable for blind / roller shutter switch = no, suitable for switch = no, Im Housing = yes, in the tube base housing = no, as module / circuit board = no, power supply = 230 V AC, push-button operation = yes, switching operation = yes, with radio transmitter = no, with radio coding device = no, with radio push-button = no, number the relay = 1, mounting type = flush mounting, material = plastic, material quality = thermoplastic, halogen free = yes, surface = other, surface finish = matt, mounting type = other, color = blue, transparent = no, suitable for protection type (IP) = IP20, radio frequency = 868 MHz, rolling code system = no, number of commands = 32, radio cooker hood control. 1 NO contact not potential free…
    99,76

    Klanten-reviews van 2080176 (2 Stück) - Main line branch terminal HLAK 25-1/6M2 brown, 2080176 - Promotional item

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over 2080176 (2 Stück) - Main line branch terminal HLAK 25-1/6M2 brown, 2080176 - Promotional item

    Productomschrijving

    EAN: 4025221401289 - manufacturer-number: 2080176 - 1 x brown / brown / brune, main line branch terminals 1/6 M2, mini-modular, can be stacked, mounting on 35 mm mounting rail in accordance with EN 60715, color coding corresponding to valid wire colors, Ui = 1000 V, VDE certified, tin-plated terminal block. Suitable for aluminum conductors. The small size means that less space is required in the distribution. 35/25 mm2 outlets can now be implemented where conventionally only 25/16 mm2 were possible. The mini-modular stackability leads to a previously unknown variability. Depending on requirements, the colour-coded terminals can be combined and removed again with a tool.PV suitability: cable entries with insulating collars enable the terminal to be used up to a nominal voltage of 1000 V in accordance with VDE 0613 / EN 60998. The terminals are finger-safe on all sides, even without a connected conductor . For use with finely stranded conductors, the terminal depth is adapted to the usual lengths of ferrules (HLAK 35 - 25 mm, HLAK 25 - 16 mm). The new terminals are VDE-approved in accordance with VDE 0603-2 for meter spaces and distribution. - 2080176

    Productspecificaties

    Artikelnummer(s)
    EAN
    4025221401289
    Brand
    Pollmann
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.