Productomschrijving
EAN: 4010312319826 - manufacturer-number: FDH62NP-230V+FTKB-rw - Radio actuator for extractor hood with radio sensor FDH62NP-230V + FTKB-rw, suitable for dimmer = no, suitable for pulse switch = yes, suitable for roller shutter switch = no, suitable for blind switch = no, suitable for blind / roller shutter switch = no, suitable for switch = no, Im Housing = yes, in the tube base housing = no, as module / circuit board = no, power supply = 230 V AC, push-button operation = yes, switching operation = yes, with radio transmitter = no, with radio coding device = no, with radio push-button = no, number the relay = 1, mounting type = flush mounting, material = plastic, material quality = thermoplastic, halogen free = yes, surface = other, surface finish = matt, mounting type = other, color = blue, transparent = no, suitable for protection type (IP) = IP20, radio frequency = 868 MHz, rolling code system = no, number of commands = 32, radio cooker hood control. 1 NO contact not potential free 10A / 250 V AC. Stand-by loss only 0.4 watts. For flush mounting. 52x53mm, 22mm deep. The connection terminals are plug-in terminals for wire cross sections from 0.2mqm to 2.5mqm. With the convenient typing technology, up to 32 radio universal buttons and radio window contacts can be taught. Only sensors are permitted which report that the window is actually open or inclined. Otherwise there is a risk of poisoning! Bi-directional radio can be activated. Local supply, switching and control voltage 230 V. Contact switching at zero crossing. Bistable relay, so there is no coil power loss and no heating as a result, even when switched on. After the installation, wait for the automatic short synchronization before the switched consumer is connected to the network. If the supply voltage fails, the switching status is retained. When the supply voltage recurs, it is switched off in a defined manner. The extractor hood motor can only be switched on when the window is open. If the window is closed, the relay switches the motor off. If, however, the engine is switched off before the window is closed, any integrated lighting that may be switched on remains switched on and can be switched on and off using the extractor hood switch. If the motor is switched on in addition to the lighting when the window is closed, the relay switches off. With a radio button or a local conventional 230 V control button (glow lamp current is not permitted), the integrated lighting can be switched on even when the window is closed and the relay is switched off. Radio window-door contact with battery 75x25x12mm, pure white. The FTKB window-door contact supplies itself with a solar cell from 100 lux daylight, otherwise with a CR2032 button cell for several years. When closing and opening, the relevant telegram is sent twice in quick succession. The current status telegram is sent cyclically every 8 minutes. Fastening by gluing. Dimensions window-door contact LxWxH: 75x25x12mm, dimensions magnet LxWxH: 37x10x6mm. - FDH62NP-230V+FTKB-rw