Meer Tubus

Tubus vega classic rack

0
Product Description The younger sibling of the Logo: The Vega Classic Rear Pannier Rack by tubus Based on the geometry of the Logo, the Vega does without the lateral tube bends for " lowering" the panniers, but is lighter. Its four-point attachment allows you to easily mount it on your bike. Technical Information:Application:Touring, CommutingAttac...

Alle aanbiedingen van dit product

Verkoper
Bezorging
Prijs
Fietsaccessoires.nl logo
Fietsaccessoires.nl
2 dagen
6,95
99,99
Fietsweb.nl logo
Fietsweb.nl
niet bekend
6,95
84,99

Anderen bekeken ook

Tubus vega classic rack
Tubus vega classic rack
Product Description The younger sibling of the Logo: The Vega Classic Rear Pannier Rack by tubus Based on the geometry of the Logo, the Vega does without the lateral tube bends for " lowering" the panniers, but is lighter. Its four-point attachment allows you to easily mount it on your bike. Technical Information:Application:Touring, CommutingAttachment:rear triangle braze-onsMaterial:steel (25CrMo4)Payload (max.):25 kgWheel Size:for 26" or 28" wheelsRear Light Hole Distance:50 mmFeatures:handmademount for rear lightsimple assemblysuitable for particularly short framesretrofittable with tubus spring flap for Logo and Vega Pannier RackManufacturer's Guarantee:In the case of a total failure, the tubus carrier systems GmbH, as of product year 2009, offers a 30 Year Guarantee (until the production year 2008 the warranty is 10 years) on all Tubus luggage racks. Learn more about warranty terms and conditions here. Manufacturer Number:black:44000silver:44500Contents:1 x 2 x 240 x 8 mm stays2 …
99,99
Tubus logo classic stainless steel pannier rack
Tubus logo classic stainless steel pannier rack
Product Description Sturdy low stacker: The Logo Stainless Steel Rack by tubus Particularly stable pannier rack with good centre of gravity thanks to deeper pannier mounts. Ideal for long and short trips. The loading area is narrower than that of the CARGO. Since bags are hooked on " one level lower" , the bag lids are at the level of the upper load surface. Large items such as tent, sleeping mat or sleeping bag are thus well supported. The geometry of the logo allows an optimal pocket fit even with short frames. Technical Information:Application:Touring, CommutingAttachment:rear triangle braze-onsMaterial:steel (25CrMo4)Payload (max.):26 kgWheel Size:for 26" or 28" wheelsRear Light Hole Distance:50 mmFeatures:handmademount for rear lightseparate eyelets for mudguard staysadapts to short built framesbetter centre of gravity for bags due to deeper attachment of the pannier strutsimple mount systemretrofittable with tubus spring flap for Logo and Vega Pannier RackManufacturer's Guarantee…
163,99
Tubus logo classic stainless steel pannier rack
Tubus logo classic stainless steel pannier rack
Product Description Sturdy low stacker: The Logo Stainless Steel Rack by tubus Particularly stable pannier rack with good centre of gravity thanks to deeper pannier mounts. Ideal for long and short trips. The loading area is narrower than that of the CARGO. Since bags are hooked on " one level lower" , the bag lids are at the level of the upper load surface. Large items such as tent, sleeping mat or sleeping bag are thus well supported. The geometry of the logo allows an optimal pocket fit even with short frames. Technical Information:Application:Touring, CommutingAttachment:rear triangle braze-onsMaterial:steel (25CrMo4)Payload (max.):26 kgWheel Size:for 26" or 28" wheelsRear Light Hole Distance:50 mmFeatures:handmademount for rear lightseparate eyelets for mudguard staysadapts to short built framesbetter centre of gravity for bags due to deeper attachment of the pannier strutsimple mount systemretrofittable with tubus spring flap for Logo and Vega Pannier RackManufacturer's Guarantee…
154,99
Tubus cargo classic pannier rack
Tubus cargo classic pannier rack
Product Description The classic: The Cargo Classic Rear Pannier Rack by tubus The basic model of all tubus racks. The Cargo is their all-round rack. The all-round happy solution. In use all over the world, tested daily in the rough and tumble of everyday life by its owners. Continuously improved in detail, just as suitable as an everyday rack as it is as a pack mule for world travel. Fits almost any bike. Carries almost any bag. Technical Information:Application:Touring, CommutingAttachment:rear triangle braze-onsMaterial:steel (25CrMo4)Payload (max.):26 kgWheel Size:for 26" or 28" wheelsRear Light Hole Distance:50 mmOther:side pannier stopFeatures:mount for rear lighthandmadeV-railscompatible and robust all-rounderfastening option for almost all panniers" horns" prevent cargo from sliding forward against the brakecan be retrofitted with tubus spring flap for pannier racksManufacturer's Guarantee:In the case of a total failure, the tubus carrier systems GmbH, as of product year 2009, o…
116,99
Tubus logo classic rack
Tubus logo classic rack
Product Description The Logo Classic Rack by tubus - Strong on tours The Logo Classic rack by tubus offers plenty of space for your belongings with two luggage levels, making it ideal for bike tours. This pannier rack is narrow at the top, but there is enough space for a tent, sleeping mat and sleeping bag. Bags can be attached to the lower cargo rails. This shifts the centre of gravity further down and improves stability. Note: Maximum tyre width: 60mm Maximum mudguard width: 65mm Product Specifications: Top attachment:Rear stays attachment Bottom attachment:Stay attachment at frame dropout Application:City & Touring Stay thickness:10 mm Wheel size:26", 28" Usage:Rear Wheel Material:Steel (CrMo) Technical Information: Rear light hole spacing:50 mm Approved For: Max Load:26 kg Product Features: with bag stopper on the lower stayswell suited for short frames Manufacturer Number: black | 26"-28": 80001 black | 29": 82001 silver | 26"-28": 80502 Contents: 1 x 2 x tube end caps, 8 mm6 x 1…
107,99
Tubus fly classic pannier rack
Tubus fly classic pannier rack
Product Description The Fly Classic Pannier Rack by tubus - Elegant and lightweight Mounted above the rear wheel, the tubus Fly rack is suitable for bikes with up to 45 mm wide tyres and is therefore a minimalist transport solution for sporty touring bikes and randonneurs. The handmade and lightweight rack consists of two bent tubes, and impresses with an elegant look. It is attached via the seat stays and to the brake bridge of your bike. If necessary, you can also attach a rear light. Specifications:Application:City & TouringUpper Mount:Brake bridge (road bike)Lower Mount:rear triangle dropoutsWheel Size:26" , 28"Rail Diameter:10 mmPayload (max.):18 kgTechnical Information:Material:steel (25CrMo4)Dimensions (H x W x D):355 x 88 / 60 x 275 mmTyre Width (max.):45 mmRear Light Hole Distance:50 mmFeatures:slim pannier rack for loads up to 18 kgmount for rear lightsuitable for up to 50 mm wide fendershandmadelightweightV-railsmounting hardware for the brake bridge of the bicycle frameManu…
78,99
Tubus click spring clamp for logo / logo evo / vega / vega evo
Tubus click spring clamp for logo / logo evo / vega / vega evo
Product Description Technical Information:Material:stainless steel, plasticCompatibility:Logo pannier rackLogo Evo pannier rackVega pannier rackVega Evo pannier rackFeatures:retrofittable spring clamp for Logo and Vega pannier racksmade of tough stainless steelclicks onto the pannier rack and is secured with screwsManufacturer Number:70044 Contents:1 x tubus spring clamp2 x bolts Manufacturer: tubus carrier systems GmbH Virnkamp 24 48157 Münster Germany contact@hebie-group.com Tubus Artikelnummer: 729643 EAN-code: 4036823921358
20,99
Tubus click spring clamp for logo / logo evo / vega / vega evo
Tubus click spring clamp for logo / logo evo / vega / vega evo
Product Description Technical Information:Material:stainless steel, plasticCompatibility:Logo pannier rackLogo Evo pannier rackVega pannier rackVega Evo pannier rackFeatures:retrofittable spring clamp for Logo and Vega pannier racksmade of tough stainless steelclicks onto the pannier rack and is secured with screwsManufacturer Number:70044 Contents:1 x tubus spring clamp2 x bolts Manufacturer: tubus carrier systems GmbH Virnkamp 24 48157 Münster Germany contact@hebie-group.com
30,99

Klanten-reviews van Tubus vega classic rack

Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

Meer over Tubus vega classic rack

Productomschrijving

Product Description The younger sibling of the Logo: The Vega Classic Rear Pannier Rack by tubus Based on the geometry of the Logo, the Vega does without the lateral tube bends for " lowering" the panniers, but is lighter. Its four-point attachment allows you to easily mount it on your bike. Technical Information:Application:Touring, CommutingAttachment:rear triangle braze-onsMaterial:steel (25CrMo4)Payload (max.):25 kgWheel Size:for 26" or 28" wheelsRear Light Hole Distance:50 mmFeatures:handmademount for rear lightsimple assemblysuitable for particularly short framesretrofittable with tubus spring flap for Logo and Vega Pannier RackManufacturer's Guarantee:In the case of a total failure, the tubus carrier systems GmbH, as of product year 2009, offers a 30 Year Guarantee (until the production year 2008 the warranty is 10 years) on all Tubus luggage racks. Learn more about warranty terms and conditions here. Manufacturer Number:black:44000silver:44500Contents:1 x 2 x 240 x 8 mm stays2 x cover plugs2 x bolts, M5 x 184 x bolts, M5 x 124 x 5.3 x 12 mm washers2 x 14 x 6 mm spacers2 x clamp blocks incl. bolts Weight: black: ca. 513 g Manufacturer: tubus carrier systems GmbH Virnkamp 24 48157 Münster Germany contact@hebie-group.com

Productinformatie

    Productspecificaties

    Artikelnummer(s)
    EAN
    4036823440002
    Brand
    Tubus
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.