TAD 5881WXT/4

0
The popular TAD 5881WXT is a very dependable 6L6GC type tube with a more modern and aggressive character. It has slightly less power than a 6L6GC but has a special bite in the upper mid range, which allows your sound to cut through on stage. The 5881WXT is used in many of the recent Fender amps, but it is our recommendation for hard rock and low-tu...

Verkopers met dit product

Verkoper
Bezorging
Prijs
DeKrijgerMuziek.nl logo
DeKrijgerMuziek.nl
niet bekend
289,15

Anderen bekeken ook

TAD KT66/4
TAD KT66/4
The TAD KT66 is our remake of the great British KT66 by MOV (MO Valve), GEC, Genalex and Gold Lion. This tube is THE REAL THING. It has a large curved glass envelope and a rounded brown base. It made the Marshall JTM45 Plexi amps famous in the 60's and the Quad Hi-Fi amps a legend. Speaking of legends: SRV used the KT66 in his Fender Amps for his outrageous, gigantic guitar sound.Tube height (without pins): approx. 115mm.Recommended: For a full bodied thick tone with larger headroom, smooth but detailed top end, single channel amps, dynamic playing, vintage British Rock and Roll as well as for the new modern vintage amps 2266 and 2466. It can also replace the 6L6GC and 5881 tubes.
222,25
TAD KT66/2
TAD KT66/2
The TAD KT66 is our remake of the great British KT66 by MOV (MO Valve), GEC, Genalex and Gold Lion. This tube is THE REAL THING. It has a large curved glass envelope and a rounded brown base. It made the Marshall JTM45 Plexi amps famous in the 60's and the Quad Hi-Fi amps a legend. Speaking of legends: SRV used the KT66 in his Fender Amps for his outrageous, gigantic guitar sound.Tube height (without pins): approx. 115mm.Recommended: For a full bodied thick tone with larger headroom, smooth but detailed top end, single channel amps, dynamic playing, vintage British Rock and Roll as well as for the new modern vintage amps 2266 and 2466. It can also replace the 6L6GC and 5881 tubes.
117,49
CTS USA CTS250-ASH
CTS USA CTS250-ASH
250K ohm audio pot, CTS, split knurled shaft with nut, lock & dress washer.Same as the regular 085 type but the brass shaft is 1/4" tall instead of 3/8".Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper …
12,60
CTS USA CTS-B52/20
CTS USA CTS-B52/20
- standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …
140,09
NitorLACK N260797108
NitorLACK N260797108
The Firemist Gold colour was introduced in 1964 at GM/Cadillac under the name Firemist Saddle, later modified to Saddle Firemist in 1965. Fender renamed it Firemist Gold to make it more descriptive and it was used from 1965 onwards to replace Shoreline Gold. It was widely used by Fender on all their models since 1965.Colours for vintage-inspired guitarsAfter great work and exhaustive study by our laboratory and technical department, we have created colours for guitars to faithfully recreate the tones of vintage Fender and Gibson guitars to paint electric guitars. They have been based on original samples from the '50s and '60s. However, keep in mind that vintage guitar colours may have changed a lot over the years due to the aging of nitrocellulose lacquer and changes in the brands' own colours. Therefore two guitars finished in 1960 with Fender card colours can look different between them or with respect to a more current guitar today.Nitrocellulose paint in 500ml canIf you'd like to p…
35,60
NitorLACK N260792108
NitorLACK N260792108
Desert Sand is a very light, very unsaturated reddish yellow colour similar to the colour of sand. It can also be defined as a deep shade of beige. Desert Sand was used by General Motors as a paint color for their first Cadillacs. Fender started using it in the late 50's, especially on their Musicmaster and Duo-Sonic models. It was also used on some lap steels of the time.Colours for vintage-inspired guitarsAfter great work and exhaustive study by our laboratory and technical department, we have created colours for guitars to faithfully recreate the tones of vintage Fender and Gibson guitars to paint electric guitars. They have been based on original samples from the '50s and '60s. However, keep in mind that vintage guitar colours may have changed a lot over the years due to the aging of nitrocellulose lacquer and changes in the brands' own colours. Therefore two guitars finished in 1960 with Fender card colours can look different between them or with respect to a more current guitar t…
35,60
TAD 7025WBHG
TAD 7025WBHG
TAD 7025-WB Highgrade Premium Selected is a low noise, super low microphonic selected version of the 12AX7 that meets all specifications required for the tube to be designated 7025 and SPAX7® The TAD 7025WB Highgrade is tested and meticulously selected for the lowest noise and microphonics for use in the critical first preamp stages of High-Gain guitar amplifiers where noise and microphonics could be an issue.It has a balanced tone with a little emphasis on the upper mid-range that gives a nice string attack and clarity to the sound while retaining a strong and defined bottom end. It will also do equally well in vintage guitar amplifiers. If used in sensitive phono preamps the tube adds freshness to the signal without being harsh or spiky. The TAD 7025 Highgrade can replace any ECC83, E83CC, ECC803S, 12AX7, 12AX7A, 12AX7M, SPAX7®, 12AX7WA/WB/WC/LPS/EH, 5751, 7025, CV492 and CV4004.
59,29

Klanten-reviews van TAD 5881WXT/4

Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

Meer over TAD 5881WXT/4

Productomschrijving

The popular TAD 5881WXT is a very dependable 6L6GC type tube with a more modern and aggressive character. It has slightly less power than a 6L6GC but has a special bite in the upper mid range, which allows your sound to cut through on stage. The 5881WXT is used in many of the recent Fender amps, but it is our recommendation for hard rock and low-tuned guitar playing.

used by Fender®, Engl®, Mesa Boogie® etc.

Productinformatie

    Verken gerelateerde categorieën

    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.