webshop.nl

Verlanglijstje

Swann Morton SWM26-20

Swann Morton SWM26-20

0
A scalpel is a great versatile tool to have around at the work bench. It's of course suitable for precision cuts in plastics, wood and paper but it can also be used as a small but very sharp scraper for finish repairs, binding and inlay work. There are so many other small jobs around the bench: stripping thin electrical wiring from pickups, scoring...

Snel naar

  • Prijzen

    PrijzenProductomschrijving

    Verkopers met dit product

    Verkoper
    Bezorging
    Prijs
    DeKrijgerMuziek.nl logo
    DeKrijgerMuziek.nl
    niet bekend
    €20,69

    Anderen bekeken ook

    Nieuw
    Swann Morton SWM4
    Swann Morton SWM4
    Swann Morton stainless steel scalpel holder #4, for blades 20 up to 23 and 26.A scalpel is a great versatile tool to have around at the work bench. It's of course suitable for precision cuts in plastics, wood and paper but it can also be used as a small but very sharp scraper for finish repairs, binding and inlay work. There are so many other small jobs around the bench, like stripping thin electrical wiring from pickups, scoring the lacquer around a top nut before removing it, cutting masking tape and sandpaper to size etc.
    19,59
    CTS USA CTS-B52/20
    CTS USA CTS-B52/20
    - standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …
    140,09
    Nieuw
    CTS USA CTS-A54/20
    CTS USA CTS-A54/20
    - long bushing .750"- 3/8" diameter- for LP-modelValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used f…
    156,79
    CTS USA CTS-A51/20
    CTS USA CTS-A51/20
    - standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …
    140,09
    Nieuw
    CTS USA CTS-B55/20
    CTS USA CTS-B55/20
    - short bushing .250"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone …
    128,59
    Nieuw
    CTS USA CTS-B50/20
    CTS USA CTS-B50/20
    - standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …
    140,09
    Nieuw
    CTS USA CTS-A56/20
    CTS USA CTS-A56/20
    - short bushing .250"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone …
    128,59
    Nieuw
    CTS USA CTS-A53/20
    CTS USA CTS-A53/20
    - standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …
    140,09
    CTS USA CTS-A58/20
    CTS USA CTS-A58/20
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    140,09
    CTS USA CTS-A61/20
    CTS USA CTS-A61/20
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    128,59

    Klanten-reviews van Swann Morton SWM26-20

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Swann Morton SWM26-20

    Productomschrijving

    A scalpel is a great versatile tool to have around at the work bench. It's of course suitable for precision cuts in plastics, wood and paper but it can also be used as a small but very sharp scraper for finish repairs, binding and inlay work. There are so many other small jobs around the bench: stripping thin electrical wiring from pickups, scoring the lacquer around a top nut before removing it, cutting masking tape and sandpaper to size etc.

    Swann Morton model 26 is one of the most used chirurgical scalpels with a straight sharpened leading edge. They are sterile, high quality surgical blades made from carbon steel, Package of 20 seperately packed blades, fits Swann Morton holder #4 (not included).

    Productinformatie

      Verken gerelateerde categorieën

      ScalpelsEHBO-productenDrogisterij
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.