Productomschrijving
Product Description SLX BR-M7100 disc brake by Shimano - stable and easy to modulate braking performance With the BR-M7100, Shimano offers for the first time an independent SLX brake especially for the Cross Country sector. The brake calliper has two pistons and features a fast, simple connection system. The BL-M7100 brake lever has a new design that increases stiffness and provides more direct feedback and braking performance. Of course it is equipped with Shimano Servo Wave technology. With a shorter empty travel, more power is available without a long reaction time. Guidelines for Replacing E-bike Components:Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance. Specifications:Series:SLX M7100Application:Cross CountryType:hydraulic, 2 pistonsActuation:mineral oilHose:SM-BH90-SBMHose Length (Front/Rear):1000 mm/1700 mmTechnical Information - Caliper:Caliper Mount:post mountPads:resinDesign:2-pieceCalliper Material:aluminiumPiston Material:CeramicHose Connection:banjoTechnical Information - Lever:Lever Length:2-fingerAdjustment Options:reach adjust (no tools required)Mount:clamp (split), I-Spec EVDesign:right (side-specific), left (side-specific)Brake Lever Material:aluminiumBrake Lever Housing Material:aluminiumHose Connection:straightCompatibility:Mounting Position: front brake caliper: brake lever leftrear brake caliper: brake lever rightBrake Rotor:140 mm, 160 mm, 180 mm, 203 mm, 220 mm (recommended: SM-RT70Pads:organic and sintered; with narrow pad shape; standard and Ice Tech brake padsE-Bike:STEPS E7000Features:Brake Caliper: stable and versatile high-performance brake controllightweight 2-piston system (ceramic)easy and quick installationpaintedsteel bolts (5 mm) Brake Lever: stable and versatile high-performance brake controleasy and quick installationdirect braking power, promotes rider concentration and increases funoptimised lever axis position with additional contact point and revised ergonomics10% stiffer than M7000 even in heatfaster braking with less empty pullflexible, action-optimised cockpit layout thanks to I-Spec EVrotation adjustment angle for compatible shift lever: 20°funnel venting with M5 funnelanodised lever, painted bodystainless steel clamp boltsTechnology:Servo Wave Shimano Servo Wave technology optimises the travel of your brake levers. During the braking process, the brake pads are guided quickly to the brake rotor with very short lever travel. The greater part of the lever travel is reserved for the actual braking force. In this way, you can apply your braking power in a more targeted manner and use it more effectively. I-Spec EV I-Spec EV describes a variant of the connection between brake lever and shift lever on Shimano MTB derailleurs. This type of mounting allows the shifter to be adjusted both horizontally and vertically in relation to the brake lever, and ensures a tidy cockpit by reducing the number of clamps required. Compared to I-Spec and I-Spec II, I-Spec EV offers a much wider adjustment range. 14 mm adjustment range the longitudinal direction and up to 60° rotation allow an optimal ergonomic adjustment to your riding style, your sitting position and your anatomy. One-Way Bleeding One Way Bleeding is a technique used on Shimano calipers that facilitates brake bleeding. The hose routing has been optimised so that no air bubbles remain in the brake calliper. In combination with the funnel, the brake can be bled cleanly and easily. J-Kit J-Kit is a simple line connection system for hydraulic brakes from Shimano, so that you can install your brakes quickly and easily. The brake hose does not come connected to the brake to facilitate routing of the hose in the frame. The brake hose is already filled with oil in the J-Kit and sealed with a thin membrane. There is a small pin in the J-Kit brake lever that pierces this diaphragm during assembly to allow oil to flow. Manufacturer Numbers:Front:I-M7100JLFPRA100Rear:I-M7100JRRXRA170Contents:1 x Shimano SLX BR-M7100 + BL-M7100 disc brake, front or rear1 x Shimano SM-BH90-SBM brake hose, 1000 mm (front) or 1700 mm (rear)1 x pair Shimano brake pads1 x inserts2 x calliper bolts1 x snap ring1 x olives (assembled)ready for installation, filled, bleeding is recommended after installationOrder Together:Disc Brake AdapterTL-BH61 tool for insert installation Manufacturer: Shimano Europe B.V. High Tech Campus 92 5656 AG Eindhoven Netherlands info@shimano-eu.com
