Rohloff cable measurement aids speedhub

Product Description Make the flange even more stable: Flange Support Rings by Rohloff Since October 2017, anodised aluminium flange rings have been part of every new Speedhub. For long-lasting enjoyment with the Rohloff gear hub, Rohloff always recommends using the flange rings with the matching butted Speedhub spokes (2.9 mm arc length). The use of flange rings can ensure that the Speedhub does not cause any problems on the flange. The rings prevent the spoke from tearing out in the event of a flange break. This is especially useful for extreme use on tandems, touring bikes, e-bikes, cargo and for riders over 100 kg. On hubs with older serial numbers, both spoke flanges of the Speedhub are the same, so two identical flange rings must be used on the right and left (small/small). Hubs with a higher serial number have a raised flange only on the cover side (left), so these hubs need two different flange rings (small/large). The " Made in Germany" lettering on the housing of the Speedhub …

Product Description The Rohloff Oil of Speedhub 500/14 oil set for the maintenance of internally geared hubs The Oil of Speedhub 500/14 oil set from Rohloff contains cleaning oil and all-season oil for your internally geared hub. To ensure that it runs smoothly and without defects for a long time, you should change the oil every 5000 kilometres or once a year. Use the cleaning oil to remove abrasion and any water that may have penetrated the internally geared hub, and top up the gear oil to ensure that your drivetrain runs smoothly and quietly. If you need a syringe and hose to fill the hub as well as oil, take a look at the oil change kit from Rohloff. Note:Only Rohloff oils (gear oils/cleaning oils) may be filled into the Rohloff Speedhub 500/14. Filling with other liquids or additives can cause damage to transmission parts (e.g. plastic parts). Specifications:Flushing Oil: Designation:SpülölApplication:lubricant Speedhub Oil: Designation:Speedhub Oil GanzjahresölApplication:lubrican…

Product Description The Rohloff Oil of Speedhub 500/14 oil set for the maintenance of internally geared hubs The Oil of Speedhub 500/14 oil set from Rohloff contains cleaning oil and all-season oil for your internally geared hub. To ensure that it runs smoothly and without defects for a long time, you should change the oil every 5000 kilometres or once a year. Use the cleaning oil to remove abrasion and any water that may have penetrated the internally geared hub, and top up the gear oil to ensure that your drivetrain runs smoothly and quietly. If you need a syringe and hose to fill the hub as well as oil, take a look at the oil change kit from Rohloff. Note:Only Rohloff oils (gear oils/cleaning oils) may be filled into the Rohloff Speedhub 500/14. Filling with other liquids or additives can cause damage to transmission parts (e.g. plastic parts). Specifications:Flushing Oil: Designation:SpülölApplication:lubricant Speedhub Oil: Designation:Speedhub Oil GanzjahresölApplication:lubrican…

Product Description Always carry the Rohloff Hub Cable Set with you on long-distance journeys This repair kit is used for internal gear mechs on the one-piece axle ring (used until the model change at the beginning of 2003). The one-piece axle ring can be recognised by the fact that the axle plate is fastened with 6 axle plate screws. The two train guides are firmly pressed into the axle ring. When changing the shift cable, the axle ring with cable pulley must be dismantled. Manufacturer Number:8271 Contents:1 x Rohloff 0.9 mm special shifter cable2 x rubber boot4 x zip ties2 x O-ring Manufacturer: Rohloff AG Mönchswiese 11 34233 Fuldatal Germany service@rohloff.de