Oasis OAS/OH-20 houder voor digitale hygrometer voor montage op gitaar

0
We created the Oasis® Hygrometer Holder to enable you to measure the humidity at the body of your guitar without risk of scratching the soundboard. Accurate humidity measurement is only possible when the hygrometer is positioned near the area where the humidifier is located. Guitar cases are designed with a cradle to support the neck of the guitar....

Verkopers met dit product

Verkoper
Bezorging
Prijs
DeKrijgerMuziek.nl logo
DeKrijgerMuziek.nl
niet bekend
25,35

Anderen bekeken ook

Oasis OAS/OH-4 Humigel vervangingsset
Oasis OAS/OH-4 Humigel vervangingsset
Humigel™ crystals are of critical importance for the successful use of our humidifiers. The ONLY reason for the use of the crystals is to reduce the risk of damage to your instrument from potential leaks. Humigel™ crystals are very hygroscopic and hold up to 400 times their weight in water. We add .3 cc's of crystals prior to packaging. This is such a small quantity that you can barely see them at the bottom of the humidifier. The best way to tell if they are present is to shake the humidifier and hear them rattle around. .3 cc's is the amount needed to turn the water into jelly. Unlike water, the jelly is semi-solid and will contain the water should the humidifier become damaged. With the crystals present, a damaged humidifier will become damp or have water spots but will not leak into you're instrument.More than .3 cc's of Humigel crystals will reduce the ability of the humidifier to function. When there are too many crystals, the water stays suspended in the crystals, and will not e…
21,10
Oasis OAS/OH-28
Oasis OAS/OH-28
The OH-28 (large) & OH-29 (small) guitar supports are designed to replace the traditional footstool, allowing guitarists to sit more comfortably and in proper balance, while playing. The supports assist players in maintaining good posture while seated, reducing the muscle stress and fatigue and allowing more freedom of movement.The OH-28 & OH-29 rest on your thigh rather than attach to your guitar, so there is no way for the supports to damage the finish of your guitar.The large support raises the height of the guitar by approximately 14 cm (5.5"). The small support raises the height of the guitar by about 10 cm (4"). The correct size is determined by your body size and the height of your foot rest. In general, taller people would use the larger rest. Players who keep their foot rest in a lower position would use the smaller support.The support has a skai/artificial leather skin. The lower side that contacts the player's leg is made from pseudo-velvet. A nylon carrying bag is included.
59,85
Oasis OAS/OH-29
Oasis OAS/OH-29
The OH-28 (large) & OH-29 (small) guitar supports are designed to replace the traditional footstool, allowing guitarists to sit more comfortably and in proper balance, while playing. The supports assist players in maintaining good posture while seated, reducing the muscle stress and fatigue and allowing more freedom of movement.The OH-28 & OH-29 rest on your thigh rather than attach to your guitar, so there is no way for the supports to damage the finish of your guitar.The large support raises the height of the guitar by approximately 14 cm (5.5"). The small support raises the height of the guitar by about 10 cm (4"). The correct size is determined by your body size and the height of your foot rest. In general, taller people would use the larger rest. Players who keep their foot rest in a lower position would use the smaller support.The support has a skai/artificial leather skin. The lower side that contacts the player's leg is made from pseudo-velvet. A nylon carrying bag is included.
59,85
Oasis OAS/OH-22+
Oasis OAS/OH-22+
Like the original Grip-Strip™, the Oasis® OH-22+ Grip-Strip™ is formulated from high-quality, textured, neoprene rubber. Precisely designed with slip resistant anti-skid ridges, it creates a secure grip for your guitar whenever it's resting on your leg. You don't have to worry about your guitar slipping and sliding around while you're playing anymore.Grip-Strip™ works with both steel string and classical guitars, and it won't harm the French polish finish on classical guitars.The OH-22+ is much larger than the original and measures 6” x 12” (15 x 30 cm) vs. 4” x 8” (10 x 20 cm). This gives the user much more positioning flexibility.
28,65
Air & Me Hygro-H Hygrostaat Klimaat accessoire Wit
Air & Me Hygro-H Hygrostaat Klimaat accessoire Wit
Electronic hygrometer to control an air humidifier. The humidity rate of indoor air should be between 40 and 60 %. Between these two values, the humidity rate is considered ideal for us, but also for animals, plants, furniture, etc. The hygrostat automatically switches on and off the air humidifier when a specified humidity rate is attained. This saves energy, and maintains the humidity level as required. - Range of humidity: 30 % a 90 % - Precision: +/- 1 % - Commutation: every 2 minutes - Max power of air humidifier: 3680 W
39,95
Boston KIT-LPJ-15 gitaar zelfbouwpakket
Boston KIT-LPJ-15 gitaar zelfbouwpakket
The ultimate rock 'n roll guitar! This single pickup guitar kit will rock your world, the included single coil P-90 pickup sounds raw and direct, the included wrap-around bridge fits this guitar just perfectly. The approved wood combination adds sustain and bite. The bolt-on neck is simple to install and the limited number of parts make this a nice entry into the world of guitar assembly. The neck is already equipped with frets and neck and the body is already aligned. All parts are included in the package such a pickup, screws, potentiometers, switches, tuners and strings. Furthermore you can of course enjoy them with paint and/or specify the color or gloss you want. If you wish to continue viewing the wood grain, then the clear coat is an excellent choice to emphasize the grain of the wood. The DIY guitar Boston is a fun, easy and creative way to create your own unique guitar.The squared off headstock leaves room for your imagination. Form the headstock to suit your own dreams!body :…
193,79
Seeburg Main Mechanism Shaft Tools
Seeburg Main Mechanism Shaft Tools
A common overlooked issue with Seeburg mechanisms is the sticking lift arm or detent shaft. This tool allows easy removal and cleaning without the need for major disassembly. One end is faced flat and the other end is knurled to indicate the hammer end. Its easiest to perform this with the mech on the bench, and is also a good opportunity to clean and lubricate the mech, and inside of cabinet.First remove mech covers, next position the carriage all the way to the right of the mechanism.Remove the tone arm assembly, place by the side to not pull on the wires.For machines equipped with Bodine or Nidec motors you do not have to remove the motor, for Westinghouse you will need to partially remove to give room for the shaft to drive straight.Next loosen the set screw BUT don't remove, this is located from the back of the mech near the clutch, follow the lift arm shaft. (3/32 allen wrench)Placing the tools smooth end squarely on the shaft next to the motor end, tap unit it starts to move, en…
45,-
Boston KIT-TE-45 gitaar zelfbouwpakket
Boston KIT-TE-45 gitaar zelfbouwpakket
This model is used on more recordings than any other electric guitar. The direct and versatile sound is yours after you have built this TE-45 kit. The mahogany body has a beautiful ash veneer on top. The top has a luxurious dark ABS binding. The fit of the maple neck with pau ferro fingerboard is perfect. All ingredients for hours of inspiration. The neck is already fitted with frets and the neck and body are already aligned. This guitar has a so called toploader bridge. The strings don't go through the body, but are strung through the bridge. The result is a somewhat warmer sound. All parts are included in the package such as pickups, screws, potentiometers, switches, tuners and strings. Furthermore you can of course enjoy them with paint and/or specify the color or gloss you want. If you wish to continue viewing the wood grain, then the clear coat is an excellent choice to emphasize the grain of the wood. The DIY guitar Boston is a fun, easy and creative way to create your own unique…
179,75

Klanten-reviews van Oasis OAS/OH-20 houder voor digitale hygrometer voor montage op gitaar

Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

Meer over Oasis OAS/OH-20 houder voor digitale hygrometer voor montage op gitaar

Productomschrijving

We created the Oasis® Hygrometer Holder to enable you to measure the humidity at the body of your guitar without risk of scratching the soundboard. Accurate humidity measurement is only possible when the hygrometer is positioned near the area where the humidifier is located. Guitar cases are designed with a cradle to support the neck of the guitar. This is also where the supply/accessory box is located, which creates a humidity barrier. Thus placing a humidifier at the headstock humidifies the head and neck but not the guitar body, and placing a humidifier in the sound hole humidifies the body of the guitar but not the headstock. Placing a hygrometer either at the supply box or the headstock won't provide accurate humidity measurements if the humidifier is located in the sound hole. The Oasis® Guitar Hygrometer Holder solves this problem by allowing placement of the hygrometer by the sound hole of your guitar near your humidifier.

How does it work? Made from a soft loop Velcro type material, it wraps around the first string and provides a flat surface where the hygrometer can be attached. An adhesive backed piece of hooked Velcro type material is attached to the back of the hygrometer.

Productinformatie

    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.