webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

jablotron 100 Ja-192J RFID tag

Meer Jablotron 100
Meer Jablotron 100 in Alarmsystemen

jablotron 100 Ja-192J RFID tag

Jablotron JA-192J RFID tag The JA-191J RFID tag is a chip key that can be used to switch on and off the JA-100 alarm system from Jablotron. Product highlights: * To activate/deactivate the alarm system * Without code entry * No more hassle due to forgetting the PIN code * Simply hold it in front of the control panel * Functions complet...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    7,62

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    jablotron 100 JA-194J-RE RFID tag
    jablotron 100 JA-194J-RE RFID tag
    De JA-194J RFID tag is een chipsleutel welke kan worden gebruikt voor het in en uitschakelen van JA-100 alarmsysteem van Jablotron. Product highlights: * Voor het activeren/deactiveren van alarmsysteem * Zonder code-invoer * Geen gedoe meer door het vergeten van de pincode * Eenvoudig voor het bedieningspaneel houden * Functioneert volledig contactloos * Meerdere chipsleutels programmeerbaar De RFID chipsleutel is een optioneel accessoire voor het contactloos schakelen van alarmcentrales en vervangt het invoeren van codes. Daarmee vindt de duidelijke autorisatie van de gebruiker aan de alarminstallatie plaats. Gebruiksvriendelijk: Voor het activeren of deactiveren houdt u de chip eenvoudig voor de het bedieningspaneel. De gebruiker hoeft geen pincode meer te onthouden, wat de autorisatie (authentificatie) aan de installatie aanzienlijk vereenvoudigt. Deze is bestemd voor het eenvoudig en comfortabel activeren en deactiveren van het alarmsysteem. Installatie en program…
    11,98
    Jablotron 100 ja-190j RFID kaart
    Jablotron 100 ja-190j RFID kaart
    Jablotron JA-190J RFID kaart De JA-190J RFID kaart is een chipsleutel welke kan worden gebruikt voor het in en uitschakelen van JA-100 alarmsysteem van Jablotron.Product highlights: * Voor het activeren/deactiveren van alarmsysteem * Zonder code-invoer * Geen gedoe meer door het vergeten van de pincode * Eenvoudig voor het bedieningspaneel houden * Functioneert volledig contactloos * Meerdere chipsleutels programmeerbaar De RFID chipsleutel is een optioneel accessoire voor het contactloos schakelen van alarmcentrales en vervangt het invoeren van codes. Daarmee vindt de duidelijke autorisatie van de gebruiker aan de alarminstallatie plaats.Gebruiksvriendelijk: Voor het activeren of deactiveren houdt u de chip eenvoudig voor de het bedieningspaneel. De gebruiker hoeft geen pincode meer te onthouden, wat de autorisatie (authentificatie) aan de installatie aanzienlijk vereenvoudigt. Deze is bestemd voor het eenvoudig en comfortabel activeren en deactiveren van het alarmsyst…
    7,62
    JA-152J-MS II, MultiSystem afstandsbediening, 2 knops
    JA-152J-MS II, MultiSystem afstandsbediening, 2 knops
    JA-152J-MS II, MultiSystem remote control, 2 buttons The JA-152J remote control is designed to remotely arm/disarm the system, activate panic alarms and control equipment. The key ring has a handy built-in "child lock". The remote control works like a segment of a Jablotron 100 control panel. It monitors and displays the battery and system status by acoustic and optical indication. The child lock prevents accidental activation of the remote control. Pressing 2 buttons activates a panic alarm. Because it is a "2-way" wireless remote control, you can see the status of the system on the handheld transmitter itself. * Renewed model * The control is equipped with both optical and acoustic indication of the execution of a command * The operation can be registered on multiple systems or multi-function relays * It checks the battery status and indicates if the battery is empty * If a key is held down, an activation is sent every second. This function can be used, for example, to …
    74,28
    JA-112E BUS RFID bedienpaneel
    JA-112E BUS RFID bedienpaneel
    JA- 112E Bus RFID Control Panel The JA - 112E is an access module with an RFID reader to operate a JA- 100 alarm system . Contains an operating segment and , if required , can be equipped with up to 20 control segments . The JA- 112E allows easy operation of the system using interlocking segments . Communicates and is powered by the bus . The module has an energy saving function . The module is addressable and occupies a position in the alarm system . specifications Power control panel bus ( 9 ... 15 V ) Power consumption in standby ( latent) 10 mA Power consumption for cable selection 15 mA Current for each segment 0.5 mA RFID frequency 125 kHz Operating temperature -10 to + 40 ° C Environment EN 50131-1 . general indoor Classification grade 2 according to EN 50131-1 , EN 50131-3 Complies with ETSI EN 300330 , EN 50130-4 , EN 55022 , EN 60950-1 Can be operated to the ERC REC 70-03
    107,90
    ja-182j 2-knop afstandsbediening
    ja-182j 2-knop afstandsbediening
    Jablotron JA-182J 2-button remote control The JA-182J is designed to remotely arm or disarm the alarm system, activate panic alarms and control other devices. The user can independently control other devices such as a garage door or the partial setting mode of the control panel. The remote control provides a useful lock function button. A simple action can make the remote control unresponsive to any buttons so that no buttons can be pressed when it is in your pocket. By pressing 2 buttons simultaneously you ensure that a panic alarm is activated in the control panel. The remote control also checks its own battery voltage and reports a low value wirelessly to the alarm system. Specifications : * Power supply: Lithium battery type CR2032 (3 V) * Battery life: approx. 4 years (5 x/day) * Communication protocol: 868 MHz * Wireless range: 30 m * Complies with: ETSI EN 300 220, EN 55022, EN 50130-4, EN 60950-1
    66,86
    JA-110B akoestische glasbreuk detector
    JA-110B akoestische glasbreuk detector
    Jablotron 100 JA-110B The JA-110B glass break BUS detector detects the breaking of glass windows or surfaces. The detector uses dual detection technology (air pressure and sound analysis). It responds to the breaking of any type of glass. The sensitivity of the detector is adjustable. The detector communicates via the BUS of the control panel and is also powered by the BUS. The alarm memory function is an optional setting, this function makes indication and locating an alarm very easy. It is possible to assign the detector to a zone and it only occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be switched off using the code control panel. • Power supply: via the control panel BUS, 12V (9 - 15 V) • Standby power consumption: 5 mA • Installation height: 2.5 meters above the ground • Detection range: up to 9 m • Dimensions: 40 x 100 x 22 mm • Safety class 2 in accordance with EN 50131-1, EN 50…
    77,32
    Ja-188j Draadloze paniek/hulp knop
    Ja-188j Draadloze paniek/hulp knop
    Jablotron JA-188J wireless panic/help button The JA-188J can be used to generate a panic/medical alarm or it can also be used to control the control panel, wireless doorbell or other devices. The button functions are programmable. Can be registered with the control panel, AC and UC receivers (relay to be activated) and the siren (bell function). It provides tamper sensors and monitors the voltage of its battery. The response to the key activation is optional. The general response is a panic alarm or switching the system on or off (selectable). Other responses can be assigned in the service mode of the control panel. The battery-powered wireless button communicates via the wireless radio protocol. Specifications : * Power supply: lithium battery (3.6V ½ AA / 1.2 Ah) * Battery life: 2 years * Communication protocol: 868 MHz * Wireless range: up to 30 meters * Dimensions: 80 x 80 x 29 mm * Safety class 2 in accordance with EN 50131-1, EN 50131-5-3
    66,86
    JA-110P BUS PIR bewegingsdetector
    JA-110P BUS PIR bewegingsdetector
    Jablotron 100 JA-110P The JA-110P is a BUS PIR motion detector designed for indoor protection. It detects the movement of an object with the temperature of the human body. The detection properties can be optimized using alternative lenses, such as the: JS-7904 corridor lens, JS-7906 horizontal cap lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. The alarm memory function is an optional setting, this function makes indication and locating an alarm very easy. It is possible to assign the detector to a zone and it only occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be switched off using the code control panel. • Power supply: via the control panel BUS, 12V (9 - 15 V) • Standby power consumption: 5 mA • Installation height: 2.5 meters above the ground • Detection range: 110°/ 12 m (with a standard lens ) • Dimensions: 60 x 97 x 52 mm • Saf…
    50,23
    JA-151P-WG, DesignLine Draadloze PIR met wit-licht bescherming
    JA-151P-WG, DesignLine Draadloze PIR met wit-licht bescherming
    JA-151P-WG Wireless PIR motion detector Its guaranteed detection coverage is 90° / 12 m and in the version with a gray lens its resistance to white light is significantly higher than the values ​​prescribed by the standard, which helps reduce false alarms caused for example by car lights shining through the windows, by lightning strikes or reflective objects. It has an implemented SMART WATCH function for the recognition of alarms and the subsequent extension of the battery life. The product is the result of design objectives for very high quality and with its aesthetic shape it fits into any installation variant, even in luxurious interiors. In addition to standard positioning in a corner of a room, it can be installed on a wall surface using the beautiful JA-193PL frame, where the detector is partially recessed and forms a very harmonious and elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection ang…
    137,60
    JA-111SH Bus schok en tilt detector
    JA-111SH Bus schok en tilt detector
    Jablotron 100 JA-111SH The wireless tilt and shock detector detects shocks from, among other things, the lifting of doors, windows, etc., caused by intruders who try to force, smash, drill or saw through to gain access to your home (property). ). The wireless tilt and shock detector has a simple installation procedure and uses digital signal processing. It has a memory of previous shocks. The detector is part of the Jablotron 100 security system and has two adjustable modes. The shock/vibration detection mode from doors, windows, etc. can be used to indicate attempts of this type of violence by reporting a detection to your alarm system. The tilt detection mode can be used to indicate unwanted 'tampering' with the object to which the detector is securely mounted. Consider that the burglar thinks he is smart and disassembles the detector. This can be used for safes, works of art, etc. The detector uses a semiconductor tri-axial accelerometer with digital output. The signal processing …
    70,74

    Klanten-reviews van jablotron 100 Ja-192J RFID tag

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over jablotron 100 Ja-192J RFID tag

    Productomschrijving

    Jablotron JA-192J RFID tag The JA-191J RFID tag is a chip key that can be used to switch on and off the JA-100 alarm system from Jablotron. Product highlights: * To activate/deactivate the alarm system * Without code entry * No more hassle due to forgetting the PIN code * Simply hold it in front of the control panel * Functions completely contactless * Multiple chip keys programmable The RFID chip key is an optional accessory for contactless switching of alarm centers and replaces entering codes. This provides clear authorization of the user to the alarm system. User-friendly : To activate or deactivate, simply hold the chip in front of the control panel. The user no longer has to remember a PIN code, which considerably simplifies the authorization (authentication) during the installation. This is intended for simple and comfortable activation and deactivation of the alarm system. Installation and programming : The chip key is programmed in the alarm center , the authorization is then programmed directly at the center. The RFID key obtains the voltage for code transmission through the radio field of the receiver, it does not require its own battery.

    Productspecificaties

    Artikelnummer(s)
    Brand
    Jablotron 100
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.