Verlanglijstje

Hosco Japan H-GB4

Hosco Japan H-GB4

0

Filing the nut slots down can be tricky. These Groobars are the perfect help to prevent filing the nut slot too deep. Four non-hardened steel bars in different thicknesses.L 1,07mm / 0.042"L 1,27mm / 0.050"M 1,42mm / 0.056"H 1,65 mm / 0.065"...

Snel naar

Prijzen

PrijzenProductomschrijving

Verkopers met dit product

Verkoper

Bezorging

Prijs

DeKrijgerMuziek.nl

niet bekend

€37,35

Anderen bekeken ook

Hosco Japan H-NF-010

Hosco Japan H-NF-010

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.0.010" / 0,25 mm width. A typical set for classical guitar would contain the following files:0.028", 0.032", 0.036", 0.042"A typical set for electric and acoustic guitars will depend on the string gauges. Always check the package for the string gauges and use the same file gauge accordingly.A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

Hosco Japan H-NF-016

Hosco Japan H-NF-016

A high quality nut file. A string seated in a properly filed nut will have the correct height and will also prevent extraneous string noise from the nut.0.016" / 0,41 mm width. A typical set for classical guitar would contain the following files:0.028", 0.032", 0.036", 0.042"A typical set for electric and acoustic guitars will depend on the string gauges. Always check the package for the string gauges and use the same file gauge accordingly.A great aid in filing nuts is the H-GB4 Hosco GrooBar. This will prevent you from filing the string slot too deep.

Hosco Japan H-SG-G

Hosco Japan H-SG-G

The perfect tool to measure the string height, nut slot depth and fret height. Comes in a handy protection case.A must-have for everybody who sets up guitars.

Hosco Japan H-TL-NF3B

Hosco Japan H-TL-NF3B

Set of 3 double-function nut files. Suitable for most bass guitars.Red file .045" and .085"Blue file .065" and .105" Yellow file .075" and .130"Alternative is to use single files H-NF- for each string gauge or the 10-file set H-NF10 or 11-file set H-NF11.total length: 190 mmfile length: 100mm

Hosco Japan H-TL-NF3C

Hosco Japan H-TL-NF3C

Set of 3 double-function nut files. Suitable for most classic guitars.Red file .030" and .038" for E and D stringBlue file .032" and .042" for B and A stringYellow file .035" and .046" for G and E string Alternative is to use single files H-NF- for each string gauge or the 10-file set H-NF10 or 11-file set H-NF11.total length: 190 mmfile length: 100mm

Hosco Japan H-TL-NF3A

Hosco Japan H-TL-NF3A

Set of 3 double-function nut files. Suitable for most acoustic steel-string guitars.Red file .016" and .042" for E and D stringBlue file .026" and.050" for B and A stringYellow file .036" and .055" for G and E string Alternative is to use single files H-NF- for each string gauge or the 10-file set H-NF10 or 11-file set H-NF11.total length: 190 mmfile length: 100mm

Hosco Japan H-TL-NF3E

Hosco Japan H-TL-NF3E

Set of 3 double-function nut files. Suitable for most electric guitars.Red file .010" and .026" for E and D stringBlue file .013" and .036" for B and A stringYellow file .017" and .046" for G and E string Alternative is to use single files H-NF- for each string gauge or the 10-file set H-NF10 or 11-file set H-NF11.total length: 190 mmfile length: 100mm

Hosco Japan H-FE2

Hosco Japan H-FE2

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE2 is for medium frets.

Hosco Japan H-FC190

Hosco Japan H-FC190

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.The material is special steel which we call high carbon tool steel.190 mm total length with a 26 mm blade width.Flat and sharp cutting edges makes very flat fret end.This is not suitable for stainless steel frets. Please use H-FC28SS for that.

Hosco Japan H-SB-2

Hosco Japan H-SB-2

Radius 10" /254 mm and 12" / 305 mm.80 mm x 150 mm. Sanding area is 65 mm x 150 mm.This double sides radiused sanding block will follow the radius of your fingerboard.For shaping fingerboards, stick our KCR100 to KCR240 self adhesive sandpaper to this block.For levelling frets use some less agressive grit KCR240 to KCR400 or even KCR600 self adhesive sandpaper.The radius of your fingerboard can be measured with our H-RG1B radius gauge.

Klanten-reviews van Hosco Japan H-GB4

Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

Meer over Hosco Japan H-GB4

Productomschrijving

Filing the nut slots down can be tricky. These Groobars are the perfect help to prevent filing the nut slot too deep. Four non-hardened steel bars in different thicknesses.

L 1,07mm / 0.042"
L 1,27mm / 0.050"
M 1,42mm / 0.056"
H 1,65 mm / 0.065"

Productinformatie

Verken gerelateerde categorieën

Straplocks Muziekaccessoires Muziekinstrumenten