Verlanglijstje

Hosco Japan H-FSW050

Hosco Japan H-FSW050

0

Fret slot saw with universal cutting teeth. Accurate and durable. Handle length 180 mm, saw blade 120 mm long. Thickness 0.50 mm....

Snel naar

Prijzen

PrijzenProductomschrijving

Verkopers met dit product

Verkoper

Bezorging

Prijs

DeKrijgerMuziek.nl

niet bekend

€61,39

Anderen bekeken ook

Hosco Japan H-TC10

Hosco Japan H-TC10

Carbon steel fretpuller with flattened blade. Not suitable for cutting frets, but perfect for pulling frets.For cutting frets please use H-FC190 or H-FC28SS.Blade width 10,0 mmBlade thickness: 0.4 mmLength: 150 mm

Hosco Japan H-FC190

Hosco Japan H-FC190

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.The material is special steel which we call high carbon tool steel.190 mm total length with a 26 mm blade width.Flat and sharp cutting edges makes very flat fret end.This is not suitable for stainless steel frets. Please use H-FC28SS for that.

Hosco Japan H-FS10

Hosco Japan H-FS10

This brass fretsetter is ideal to tap down a fret without loosening the strings. If a fret has moved upwards, it can be reset with the fretsetter and a tap of a hammer.The fretsetter fits over the crown of the fret.This is a well designed brass tool with the right weight and a length of 100 mm and it has a width of 7 mm.Also very usefull to hold down a fret that is being glued in.

Hosco Japan H-FE1

Hosco Japan H-FE1

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE1 is for small frets.

Hosco Japan H-FE2

Hosco Japan H-FE2

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE2 is for medium frets.

Hosco Japan H-FPR-SET

Hosco Japan H-FPR-SET

Set of 4 fret polishing rubbers.150-180-400-1000 grit.Easy and fast fret polishing tool. Erasing the small scratches of the fret polishing or cleaning dirty frets. Because of this softness, rubber fits to fret arch perfectly. Also soft rubber keeps the fingerboard damage to a minimum. Easy to cut this rubber by cutter knife for your fret work. This is a great rust remover and polisher!

Hosco Japan H-SCR1S

Hosco Japan H-SCR1S

Hosco wide scrapers are developed in collarboration with a famous Japanese classical guitar builder. The wide scrapers are made this wide so they cover the sides of a guitar in one go.Straight shape: 150x55mm, Thickness: 1.0 mm

Hosco Japan H-IDP-156

Hosco Japan H-IDP-156

This compact dual grit diamond plate is ideal for honing sharp fret ends or for sharpening tools.The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.One side is 150 grit, the other side is 600 grit. size:30 x 100 mm

Hosco Japan H-IDP-410

Hosco Japan H-IDP-410

This compact dual grit diamond plate is ideal for honing sharp fret ends or for sharpening tools. The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.One side is 400 grit, the other side is 1000 grit. size:30 x 100 mm

Handmatige Tegelsnijder 120 cm Snijlengte Hoek van 0° tot 60° 143 x 23 x 23 cm

Handmatige Tegelsnijder 120 cm Snijlengte Hoek van 0° tot 60° 143 x 23 x 23 cm

Het juiste gereedschap is cruciaal voor het uitvoeren van snijwerkzaamheden. Het staat buiten kijf dat deze 48 inch / 1200 mm tegelsnijder de ideale hulp is bij het snijden van alle soorten tegels, of het nu gaat om normale vloertegels of gepolijste tegels. Hij combineert stabiele lasnaden met een robuuste constructie, wat zich weerspiegelt in de verdikte basis die een betrouwbare ondersteuning biedt voor de zware tegels. De nauwkeurige snede is van groot belang, daarom is onze tegelsnijder uitgerust met een uitstekende snijkant van wolfraamcarbide staal, lineaire lagers en een meetlat om de precisie bij het snijden te verhogen. Op deze manier kan efficiënt, schoon en snel snijden nog eenvoudiger worden bereikt. Bovendien voorkomt de ergonomische handgreep vermoeidheid aan de hand tijdens het werken. Over het geheel genomen beschikt de machine over 4 zijklemmen die 180° verstelbaar zijn en een liniaal die kan worden gedraaid in een hoek van 0°-60°. Beide zijn speciaal ontworpen om grot…

Klanten-reviews van Hosco Japan H-FSW050

Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

Meer over Hosco Japan H-FSW050

Productomschrijving

Fret slot saw with universal cutting teeth. Accurate and durable.

Handle length 180 mm, saw blade 120 mm long. Thickness 0.50 mm.

Productinformatie

Verken gerelateerde categorieën

Auto-onderdelen Auto's