Verlanglijstje

Hosco Japan H-FC190

Hosco Japan H-FC190

0

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.The material is special steel which we call high carbon tool steel.190 mm total length with a 26 mm blade width.Flat and sharp cutting edges makes very flat fret end.This is not suitable for stainless ste...

Snel naar

Prijzen

PrijzenProductomschrijving

Verkopers met dit product

Verkoper

Bezorging

Prijs

DeKrijgerMuziek.nl

niet bekend

niet bekend

€76,40

Anderen bekeken ook

Hosco Japan H-FC190

Hosco Japan H-FC190

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.The material is special steel which we call high carbon tool steel.190 mm total length with a 26 mm blade width.Flat and sharp cutting edges makes very flat fret end.This is not suitable for stainless steel frets. Please use H-FC28SS for that.

Hosco Japan H-TC10

Hosco Japan H-TC10

Carbon steel fretpuller with flattened blade. Not suitable for cutting frets, but perfect for pulling frets.For cutting frets please use H-FC190 or H-FC28SS.Blade width 10,0 mmBlade thickness: 0.4 mmLength: 150 mm

Hosco Japan H-FS10

Hosco Japan H-FS10

This brass fretsetter is ideal to tap down a fret without loosening the strings. If a fret has moved upwards, it can be reset with the fretsetter and a tap of a hammer.The fretsetter fits over the crown of the fret.This is a well designed brass tool with the right weight and a length of 100 mm and it has a width of 7 mm.Also very usefull to hold down a fret that is being glued in.

Hosco Japan H-FPR-SET

Hosco Japan H-FPR-SET

Set of 4 fret polishing rubbers.150-180-400-1000 grit.Easy and fast fret polishing tool. Erasing the small scratches of the fret polishing or cleaning dirty frets. Because of this softness, rubber fits to fret arch perfectly. Also soft rubber keeps the fingerboard damage to a minimum. Easy to cut this rubber by cutter knife for your fret work. This is a great rust remover and polisher!

Hosco Japan H-FSW050

Hosco Japan H-FSW050

Fret slot saw with universal cutting teeth. Accurate and durable. Handle length 180 mm, saw blade 120 mm long. Thickness 0.50 mm.

Hosco Japan H-FSW060

Hosco Japan H-FSW060

Fret slot saw with universal cutting teeth. Accurate and durable. Handle length 180 mm, saw blade 120 mm long. Thickness 0,60 mm

Hosco Japan H-FE2

Hosco Japan H-FE2

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 2 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE2 is for medium frets.

Hosco Japan H-FE1

Hosco Japan H-FE1

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE1 is for small frets.

Hosco Japan H-FE3

Hosco Japan H-FE3

Three files in one! One concave, one fine toothed side and one extra fine toothed side.The concave fret end file is the perfect tool to use after bevelling the fret ends. This concave file has untoothed sides to not damage the fingerboard. The concave part will blend in the fret end with the fret's crown. The radius is 1 mm.The sides have one fine and one superfine file surface as well to use in removing burrs.Length 16 cmThis H-FE3 is for wide frets.

Hosco Japan H-FCF600

Hosco Japan H-FCF600

High quality diamond grit file for crowning frets after levelling. Three sided for narrow, medium and wide frets. The narrow part is narrow enough for mandolin frets, the wide part is wide enough for jumbo frets. Crown file for small (R=1mm), medium (R=2mm) or wide frets (R=3mm) frets.The diamond surface makes for clean, precise and fast filing. The material is very durable and this file will last a very long time. Diamond files work on both strokes, back and forth. It will leave a smoother surface without chattering.

Meer over Hosco Japan H-FC190

Productomschrijving

This fret cutter was developed at the factory that has 85 years of history in making cutting pliers by Japanese traditional manufacturing methods.
The material is special steel which we call high carbon tool steel.
190 mm total length with a 26 mm blade width.
Flat and sharp cutting edges makes very flat fret end.

This is not suitable for stainless steel frets. Please use H-FC28SS for that.

Productinformatie

Verken gerelateerde categorieën

Handsnijders Gereedschap Klussen