Productomschrijving
Gates CDX Fin Line tandwiel achter 22 tands Beltline 45,5 Alfine/Nexus/Sturmey Archer Product Description This Gates CDX rear belt drive sprocket for touring use has three SureFit™ cams, fits the so-called Unified Beltline of 45.5 mm and is compatible with Shimano Alfine 8- and 11-speed mechanical and Nexus Disc 3-, 7- and 8-speed internally geared hubs. A belt line that is further out than on older models with 43.7 mm ensures higher performance, especially in combination with mid-drive motors. Guidelines for Replacing E-bike Components:Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance. Specifications:Application:City & TouringTeeth:22 t, 24 tMount:3-cam (3-lobe)Technical Information:Width of the teeth:11 mmTooth division:11 mmBelt line:45.5 mmMounting web thickness:2.9 mmOffset:2.7 mm (assembly surface), 1.25 mm (centre line)Material:stainless steelCompatibility:Shimano Alfine 8-speed SG-S7001-8Shimano Alfine 11-speed SG-S700Shimano Nexus 3-speed coaster brake SG-3C41Shimano Nexus 3-speed disc SG-3D55Shimano Nexus 7-speed roller brake SG-C3000-7RShimano Nexus 7-speed coaster brake SG-C3000-7CShimano Nexus 7-speed disc SG-C3001-7DShimano Nexus 8-speed disc SG-C6001-8D, SG-C6001-8CDNote from the manufacturer:For 22 t sprockets in all combinations with mechanical Nexus 8-speed internally geared hubs, a Right hand dust cap B for Inter-8 should be ordered as well. Features:CDX level: high-end version for high loads and best performancesuitable for mud, sand, snow and ice as well as all roadsmiddle guide groove (CenterTrack)high mileagerobust stainless steelSureFit pinion design: flexible interface for 3-cam flat, greater mounting tolerancewith 2.7 mm offset for a belt line of 45.5 mm for Alfine / Nexus internally geared hubs (Unified Beltline)Technology:Gates Carbon Drive System The main advantages of the Gates Carbon Drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or leisure riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past. Clean: No lubricant means no accumulation of grease and dirt. Smooth and silent operation: no metal-to-metal contact of the chains. Light: The whole system weighs less than a standard bicycle chain. No elongation: Belt does not need to be re-tensioned or replaced. Self-cleaning: CenterTrack and MudPort profiles are specially designed to repel mud, dirt, snow or other contaminants. Consistent efficiency: The drive boasts a long service life compared to that of a conventional chain, where efficiency is significantly reduced by wear or dirt. Installing a Gates Carbon Drive Belt Drive requires a specially-made frame, therefore we strongly advise against using one to modify a conventional framework. Models:22 tooth: Outer Diameter:75.3 mmManufacturer Number:CT1122XMN-U 24 tooth: Outer Diameter:82.3 mmManufacturer Number:CT1124XMN-UContents:1 x Gates CDX 3-cam Shimano Unified Rear Belt Drive SprocketsOrder Together:SureFit assembly tool Manufacturer: Universal Transmissions GmbH Walkmühlenstraße 195 99974 Mühlhausen Germany shop@carbondrive.net
