webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

FM 446 - EIB Function modulus FM446

Meer Buderus
Meer Buderus in Klussen

FM 446 - EIB Function modulus FM446

manufacturer-number: FM446 - This chapter should provide you with the basics of the EIB technology. A few examples will demonstrate the advantages of combining EIB with domestic automation or building management systems. In general, the function module FM 446 acts, regarding its utilisation with EIB technology, only as a communication interface. Th...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    503,69

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    KDA-064 - EIB/KNX DALI Gateway
    KDA-064 - EIB/KNX DALI Gateway
    EAN: 4021087028059 - manufacturer-number: KDA-064 - The EIB/KNX DALI Gateway KDA-064 is used to connect a digital DALI lighting system to the KNX installation. Thus, room-based lighting control is conveniently incorparated into the higher-level KNX building management system.The device transforms switch- and dim-commands from the connected KNX system into DALI telegrams and status information from the DALI bus into KNX telegrams. The EIB/KNX DALI Gateway KDA-064 is a Category 1 device (in accordance with EN 62386-103). This means the device must only be used in DALI segments with connected ECGs and not with other DALI control devices within the segment (No multi-master function).Power supply for the up to 64 connected ECGs comes directly from the DALI Gateway. An addistional DALI power supply is not required and not permitted. The item comes in a 4 units wide DIN rail casing so it can be directly integrated into the main distribution box. The connection to the KNX bus is realized via b…
    499,80
    7450565 - Function modulus
    7450565 - Function modulus
    manufacturer-number: 7450565 - For the regulation/control of the fast forward temperature warmth in keeping with requirement (to only the Vitocom 200, type EIB). These filament heater circuits must be regulated with a Vitotronic 050 (type HK1M) at heating systems with Vitodens, Vitopend and Vitoplus and filament heater circuits with mixer. With this modulus the individual room temperature controllers can be assigned to the filament heater circuits. Through this the heating main station energy optimized is regulated. Into dependence of the outside temperature and the room data (different value desired/current temperature...). - 7450565
    266,88
    52900 - EIB, KNX Home Server 4 with EIB, KNX IP Router, 52900
    52900 - EIB, KNX Home Server 4 with EIB, KNX IP Router, 52900
    manufacturer-number: 52900 - Additional delivery volume: 1 pce EIB/KNX IP Router EIBMARKT GmbH (N000402) with Power over Ethernet (PoE) NOTE: The GIRA Home Server 4 is the new on-board computer for the intelligent house. As an interface between modern electrical installation and computer network it controls all components of home automation that are interconnected by means of the KNX/EIB system and offers the possibility to integrate numerous other technologies into the home control system. The Gira Home Server 4 can easily be fixed to the wall using an optional wall bracket. This saves space, permits easy access to the connecting points on the rear side of the device and facilitates the management of cables. For use in commercial buildings the special Gira Facility Server can be provided. It disposes of more memory capacity and is supplied as 19 Zoll plug-in unit with aluminium cover for installation in a 19 Zoll rack. With its high diversity of control elements such as the Gira Co…
    2.223,68
    KAA-8R - EIB/KNX Universal Actuator 8fold 16A
    KAA-8R - EIB/KNX Universal Actuator 8fold 16A
    EAN: 4021087049122 - manufacturer-number: KAA-8R - The EIB/KNX actuator is a 8 channel device with high quality independent latching relay for switches, shutters or any possible mixed applications. The compact design with 4SU (72mm) wide modular makes it suitable for the installation in the distribution board on 35mm DIN mounting rails. The connection to the KNX bus is implemented via a bus connection terminal. The switching relays are particularly suitable for sitching ohmic loads, capcitive loads - for instance LED drivers - and inductive loads as well as motors in shutter- or blind-applications. The actuator is powered via EIB/KNX and does not require any additional power supply.Features8 channel acuator in compact sizesuitable for various and/or mixed applicationsfor AX, C-load, capacitive &, inductive loadsprogrammable via ETS5 softwaremanual control via push buttonprogrammable various time- and scene-functionsApplicationsbuilding automationlighting switchshutter/blind controlheat…
    239,90
    52900 - EIB, KNX Home Server 4, 52900 - special offer
    52900 - EIB, KNX Home Server 4, 52900 - special offer
    EAN: 4010337529002 - manufacturer-number: 52900 - NOTE:We also offer the Home Server 4 in a special offer for our customers of eibmarkt.com (see tab ZollACCESSORY Zoll). In this offer the KNX IP Router (Interface to KNX) is included. The GIRA Home Server 4 is the new on-board computer for the intelligent house. As an interface between modern electrical installation and computer network it controls all components of home automation that are interconnected by means of the KNX/EIB system and offers the possibility to integrate numerous other technologies into the home control system. The Gira Home Server 4 can easily be fixed to the wall using an optional wall bracket. This saves space, permits easy access to the connecting points on the rear side of the device and facilitates the management of cables. For use in commercial buildings the special Gira Facility Server can be provided. It disposes of more memory capacity and is supplied as 19 Zoll plug-in unit with aluminium cover for insta…
    2.145,62
    TYA670WD2 - Control unit for light control system TYA670WD2
    TYA670WD2 - Control unit for light control system TYA670WD2
    EAN: 3250618502497 - manufacturer-number: TYA670WD2 - KNX/DALI Gateway Tunable White, DALI2 TYA670WD2, KNX/DALI Gateway Tunable White, DALI2. DALI2 certified KNX/DALI gateway for integrating devices with DALI and DALI 2 interface into the KNX system. A DALI system coof a maximum of 64 DALI devices can be controlled and visualised. Setting of the colour temperature for luminaires with DALI Device Type 8 (Type: Colour Temperature) for Tunable White according to IEC 62386-209. Control of the colour temperature via relative or absolute dimming and additionally via scenes and effects. The KNX DALI Gateway product represents the DALI master of a complete DALI system. The manual control available on the gateway allows the connected DALI devices to be controlled even for commissioning in building site operation without the gateway being supplied with the KNX bus voltage or it being configured with the ETS. For this purpose, the devices connected to the DALI system are controlled centrally via …
    372,16
    N000402 - EIB KNX IP Router PoE
    N000402 - EIB KNX IP Router PoE
    manufacturer-number: N000402 - Note: The Power over Ethernet supply is standardized acc. to Standard PoE (IEEE 802.3af) and integrated via RJ45. We can recommend a PoE Ethernet Switch from Netgear, e.g. FS108P. The device disposes of 8 ports, four of which are equipped with Power over Ethernet (IEEE802.3af, 48 VDC). The IP Router, for example, can be connected to one of these four ports. As an alternative, power supply can be provided by means of screw connecting terminals at the upper side using a separate power supply unit (12-24V DC) or transformer (12-24V AC). Parallel power must be avoided! Caution when using managed Switches (Cisco or similar): With some Switches there can problems with the standard settings and the IP devices are not recognized. In this case make the following adjustment at the Switch: Full-Duplex-Mode Digit rate: 10 Megabit/s A blinking Ethernet LED at the IP Router or IP Interface indicates an existing link i.e. the digit rate and the mode have been set cor…
    273,07
    SSA955 - Radiator Control actuator, Synco Living, SSA955 - special offer
    SSA955 - Radiator Control actuator, Synco Living, SSA955 - special offer
    EAN: 7612914024909 - manufacturer-number: SSA955 - Synco Living - Radiator Control Actuator + RF-controlled actuator for radiator valves + RF communication based on KNX standard (868 MHz, bidirectional) + Battery-powered by commercially available 1.5 V batteries (reversed polarity protection) + Low power consumption + Silent mode (e.g. for use in sleeping rooms) + Nominal stroke 2.5 mm + Valve positioning force 110 N + Automatic identification of valve stroke + Parallel connection of multiple actuators possible + Integrated temperature sensor + For direct mounting with coupling nut (no tools required) + Manual adjustment Use: + For integration into the Siemens Synco 900 system + Suited for use in heating plant for operating radiator valves from Siemens or radiator valves of other manufacture + Several radiator control actuators can be used in one room Compatibility: Valves of other manufacture without adapter: The SSA955 can operate without adapter radiator valves of …
    202,90
    PWM-60-24KN - EIB/KNX LED Driver 60W with PWM Output
    PWM-60-24KN - EIB/KNX LED Driver 60W with PWM Output
    EAN: 4021087070225 - manufacturer-number: PWM-60-24KN - The PWM KN series from manufacturer Mean Well is a constant voltage mode output LED driver featuring Pulse Width Modulation (PWM) brightness control and the KNX interface to avoid using the complicated KNX-DALI gateway. There are a great number of options for adjusting the dimming process, e.g. dimming speeds, transition time, On-/Off- Behavior…,. Scene function and different automatic functions are also available for the KNX interface.The PWM Output EIB/KNX LED Driver PWM-60KN is a 60W AC/DC LED driver featuring the constant voltage mode with PWM style output, wich is able to maintain the colour temperature and the brightness homogeneity when driving all kinds of LED stripes and constant voltage LED bulbs. Due to the built-in KNX interface the usage of the complicated KNX-DALI gateway can be avoided.The EIB/KNX LED Driver PWM-60KN operates from 90-305VAC and offers two models with output voltage 12V and 24V. Thanks to the high ef…
    67,83
    EIB-YStY 2x2x0,8 Eca (100 Meter) - EIB KNX bus cable ring 100m green with 4kV verification EIB-Y(St)Y 2x2x0,8
    EIB-YStY 2x2x0,8 Eca (100 Meter) - EIB KNX bus cable ring 100m green with 4kV verification EIB-Y(St)Y 2x2x0,8
    manufacturer-number: EIB-YStY2x2x0,8Eca - Telecommunication cable 4x0,8mm Diameter conductor 0,8mm, Conductor category Class 1 = solid, Total number of cores 4, Number of stranding elements 2, Stranding Bundle, Stranding element Quad, Core insulation PVC, Core identification Colour, Screen over stranding element None, Screen over stranding Foil, Material outer sheath PVC, Colour outer sheath Green, Circuit integrity No, Outer diameter approx. 6,8mm, Operating temperature, flexible -5 ... 50°C, Operating temperature, fix -30 ... 70°C, Weight per km 64kg, Manufacturer Order number: EIB-Y(St)Y 2x2x0,8 Ri.100KNX Twisted Pair (TP): A two-core twisted pair data cable (bus cable) is the most common communication medium for KNX installations. Here all devices are connected with one another via the bus cable. Twisted pair cables are cost-effective to buy and easy to install. In KNX TP the bus cable supplies all bus devices with both data and power. The rated voltage of the bus system is 24 V, w…
    45,79

    Klanten-reviews van FM 446 - EIB Function modulus FM446

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over FM 446 - EIB Function modulus FM446

    Productomschrijving

    manufacturer-number: FM446 - This chapter should provide you with the basics of the EIB technology. A few examples will demonstrate the advantages of combining EIB with domestic automation or building management systems. In general, the function module FM 446 acts, regarding its utilisation with EIB technology, only as a communication interface. The function module can only be integrated into the EIB system with the EIB Tool Software (ETS). Leading European electrical engineering companies have joined under the umbrella of the European Installation Bus Association (EIBA). The EIBA aims to develop and advance a common European concept regarding guidelines and, amongst others, buscompatible products. This concept relates to the EIB (European Installation Bus). Install the function module FM 446 into the control devices, which are part of the Logamatic 4000 control system (software version 4.17 or higher). The function module FM 446 provides an interface to the EIB bus system, and you can integrate it as a user into the EIB system. It primarily serves as communication interface for integration of the heating control system into a domestic automation system using the European Installation Bus (EIB). The main functions originate from the EIB system or the EIB software. Using an EIB system in conjunction with the function module FM 446 enables up to seven heating circuits and the DHW heating of a Buderus boiler control unit to be regulated. If the function module FM 446 has been installed into the control device and after the type of influence of the control unit via the EIB bus has been determined, the EIB expert must – in accordance with agreed arrangements - integrate the function module FM 446 as user into the existing EIB network. - FM 446

    Productspecificaties

    Artikelnummer(s)
    Brand
    Buderus
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.