webshop.nl
Categorieën
  Sluiten

Inloggen

Verlanglijstje

Fender 0992257000

Fender 0992257000

250K push-pull split-shaft potentiometer lets you add a coil tap or phase switch to your guitar without drilling extra holes. Mounting hardware included....

Snel naar

  • Prijzen

    PrijzenProductomschrijving

    33,55

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    Fender 0990830000
    Fender 0990830000
    Pure Vintage PartsFender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.But best of all, Pure Vintage guitar and amp electronics are also versatile enough to fit most Fender guitars and tube amplifiers, making it easier than ever to inject that vintage vibe into any setup.FeaturesVintage-accurate 250K 3/8" CTS split shaft potentiometer for volume or tone controlAccepts push-on-style control knobsIncludes mounting nut, washer and modern .022uf capacitorFits most vintage and modern Stratocaster® guitars
    19,95
    Fender 0990831000
    Fender 0990831000
    Pure Vintage PartsFender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.But best of all, Pure Vintage guitar and amp electronics are also versatile enough to fit most Fender guitars and tube amplifiers, making it easier than ever to inject that vintage vibe into any setup.FeaturesVintage-accurate 250K 3/8" solid shaft potentiometer for volume or tone controlAccepts set screw mounting knobs (sold separately)Includes mounting nut, washer and modern .01mf @ 250V capacitorFits most vintage and modern Telecaster®, Jazz Bass® and Precision Bass® guitars
    19,10
    CTS USA CTS500-B60
    CTS USA CTS500-B60
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    14,09
    CTS USA CTS250-A63
    CTS USA CTS250-A63
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    14,09
    CTS USA CTS-A63/20
    CTS USA CTS-A63/20
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    156,79
    CTS USA CTS-B64/20
    CTS USA CTS-B64/20
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    156,79
    CTS USA CTS-A58/20
    CTS USA CTS-A58/20
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    140,09
    CTS USA CTS250-A51
    CTS USA CTS250-A51
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    12,60
    CTS USA CTS500-A53
    CTS USA CTS500-A53
    Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…
    12,60

    Klanten-reviews van Fender 0992257000

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Fender 0992257000

    Productomschrijving

    250K push-pull split-shaft potentiometer lets you add a coil tap or phase switch to your guitar without drilling extra holes. Mounting hardware included.
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.