webshop.nl
Categorieën
  Sluiten

Verlanglijstje

Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250

Meer Cycplus

Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250

0
Cyclus Tools bearing cartridge Pullers for Campagnolo Ultra Torque crank. The puller is exclusively for removing the ball bearings of Campagnolo Ultra Torque cranks! Included: - puller industry Bearings Campagnolo Ultra Torque crank. Preparation: First, remove the snap ring on the right side crank sitting in front of the ball bearings. Application:...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Webshops met dit product

    Webshop
    Bezorging
    Prijs

    Anderen bekeken ook

    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cyclus Tools bearing cartridge Pullers for Campagnolo Ultra Torque crank. The puller is exclusively for removing the ball bearings of Campagnolo Ultra Torque cranks! Included: - puller industry Bearings Campagnolo Ultra Torque crank. Preparation: First, remove the snap ring on the right side crank sitting in front of the ball bearings. Application: Now run the puller on the crank axle. Spread the arms of the stripper, than join the three clamps behind the bearing shell. Now turn the rotary spindle of the stripper. The ball bearing should now be deducted equally from the bearing seat. Then clean the bearing seat and grease it a little. To assemble the new ball bearing, you can use the Cyclus tools Impress tool (Part No .: 720 263) for Campagnolo cranks. Accessories: Part No .: 720 252 Adapter Campagnolo crank to pull the bearing ring. Artikelnummer: 7720250EAN: 8590831430708Merken: CyclusMateriaal: StaalType gereedschap: TrapasNetto gewicht (g): 1007Kleur.: Zilver
    168,50
    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250
    Cyclus Tools bearing cartridge Pullers for Campagnolo Ultra Torque crank. The puller is exclusively for removing the ball bearings of Campagnolo Ultra Torque cranks! Included: - puller industry Bearings Campagnolo Ultra Torque crank. Preparation: First, remove the snap ring on the right side crank sitting in front of the ball bearings. Application: Now run the puller on the crank axle. Spread the arms of the stripper, than join the three clamps behind the bearing shell. Now turn the rotary spindle of the stripper. The ball bearing should now be deducted equally from the bearing seat. Then clean the bearing seat and grease it a little. To assemble the new ball bearing, you can use the Cyclus tools Impress tool (Part No .: 720 263) for Campagnolo cranks. Accessories: Part No .: 720 252 Adapter Campagnolo crank to pull the bearing ring. Artikelnummer: 7720250EAN: 8590831430708Merken: CyclusMateriaal: StaalType gereedschap: TrapasNetto gewicht (g): 1007Kleur.: Zilver
    168,95
    Wheels manufacturing Wheels mfg lagerkit pressfit bb86 sram dub abec 3
    Wheels manufacturing Wheels mfg lagerkit pressfit bb86 sram dub abec 3
    Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle SRAM DUB compatible cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Complete kit for one frame includes: • (2) - Enduro BB86 to 29MM Dual-Row ABEC-3 Stainless Steel Bearing • (2) - 0.5mm crank spacer • (2) - 1.0mm crank spacer • (2) - 5.0mm crank spacer • (2) - 2.5mm crank spacer • (2) - Dust seals Specifications: • Bearings: Enduro Dual-Row ABEC-3, 440c Stainless Steel Races • Color: Silver • Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 • Bottom Bracket Shell Width: 86.5mm - 132mm • Bottom Bracket Shell I.D.: 41mm • Flange OD: 42mm • Crank Spindle Diameter: 29mm (DUB) • Over Bearing Width: 92mm in 86.5mm wide shell* • Weight: 90g • Packaged for retail display * Over Bearing Width Dimensions include supplied silicone dust shields. Compatibility: Compatible wi…
    229,55
    Wheels manufacturing Wheels mfg lagerkit pressfit bb86 sram dub abec 3
    Wheels manufacturing Wheels mfg lagerkit pressfit bb86 sram dub abec 3
    Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle SRAM DUB compatible cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Complete kit for one frame includes: • (2) - Enduro BB86 to 29MM Dual-Row ABEC-3 Stainless Steel Bearing • (2) - 0.5mm crank spacer • (2) - 1.0mm crank spacer • (2) - 5.0mm crank spacer • (2) - 2.5mm crank spacer • (2) - Dust seals Specifications: • Bearings: Enduro Dual-Row ABEC-3, 440c Stainless Steel Races • Color: Silver • Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 • Bottom Bracket Shell Width: 86.5mm - 132mm • Bottom Bracket Shell I.D.: 41mm • Flange OD: 42mm • Crank Spindle Diameter: 29mm (DUB) • Over Bearing Width: 92mm in 86.5mm wide shell* • Weight: 90g • Packaged for retail display * Over Bearing Width Dimensions include supplied silicone dust shields. Compatibility: Compatible wi…
    229,95
    Wheels manufacturing Wheels mfg lager kit bb30 42x29x7 dub 2rs + clips abec 3
    Wheels manufacturing Wheels mfg lager kit bb30 42x29x7 dub 2rs + clips abec 3
    BB30 service kit for SRAM DUB cranks includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips. • Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm • Enduro ABEC-3 bearings • Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider. Artikelnummer: BB30-KIT-DUBEAN: 811079025661Merken: Wheels ManufacturingModel: BB30Type: 2RS ABEC-3Binnendiameter lager (mm): 29Buitendiameter lager (mm): 42Lagerhoogte (mm): 7Lagerkwaliteit: ABEC-3Kleur.BlauwZilver
    59,95
    Wheels manufacturing Wheels mfg lager kit bb30 42x29x7 dub 2rs + clips abec 3
    Wheels manufacturing Wheels mfg lager kit bb30 42x29x7 dub 2rs + clips abec 3
    BB30 service kit for SRAM DUB cranks includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips. • Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm • Enduro ABEC-3 bearings • Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider. Artikelnummer: BB30-KIT-DUBEAN: 811079025661Merken: Wheels ManufacturingModel: BB30Type: 2RS ABEC-3Binnendiameter lager (mm): 29Buitendiameter lager (mm): 42Lagerhoogte (mm): 7Lagerkwaliteit: ABEC-3Kleur.BlauwZilver
    60,24
    Wheels manufacturing Wheels mfg trapas bb30a outboard sram 22/24mm abec 3
    Wheels manufacturing Wheels mfg trapas bb30a outboard sram 22/24mm abec 3
    The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 22mm / 24mm spindle diameter cranks (SRAM / Truvativ GXP) in BB30A (42mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. BB30A is only used for Cannondale asymmetrical frames. • Bearings: Enduro ABEC-3 • Color: Black • Bottom Bracket/Frame Interface: Cannondale BB30A • Bottom Bracket Shell Width: 73mm • Bottom Bracket Shell I.D.: 42mm • Over Bearing Width: 91mm in 73mm wide shell* • Crank Spindle Diameter: 22/24mm • Tool Pattern: 44mm x 16 notch • Weight: 129g • Packaged for retail display * Over Bearing Width Dimensions include supplied silicone dust shields. Artikelnummer: BB30A-OUT-SRAMEAN: 811079024749Merken: Wheels ManufacturingModel: BB30Netto gewicht …
    142,95
    Wheels manufacturing Wheels mfg trapas bb30a outboard sram 22/24mm abec 3
    Wheels manufacturing Wheels mfg trapas bb30a outboard sram 22/24mm abec 3
    The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 22mm / 24mm spindle diameter cranks (SRAM / Truvativ GXP) in BB30A (42mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. BB30A is only used for Cannondale asymmetrical frames. • Bearings: Enduro ABEC-3 • Color: Black • Bottom Bracket/Frame Interface: Cannondale BB30A • Bottom Bracket Shell Width: 73mm • Bottom Bracket Shell I.D.: 42mm • Over Bearing Width: 91mm in 73mm wide shell* • Crank Spindle Diameter: 22/24mm • Tool Pattern: 44mm x 16 notch • Weight: 129g • Packaged for retail display * Over Bearing Width Dimensions include supplied silicone dust shields. Artikelnummer: BB30A-OUT-SRAMEAN: 811079024749Merken: Wheels ManufacturingModel: BB30Netto gewicht …
    143,30

    Klanten-reviews van Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cycplus Lager afnemer bracketas Ultra Torque Cyclus 720250

    Productomschrijving

    Cyclus Tools bearing cartridge Pullers for Campagnolo Ultra Torque crank. The puller is exclusively for removing the ball bearings of Campagnolo Ultra Torque cranks! Included: - puller industry Bearings Campagnolo Ultra Torque crank. Preparation: First, remove the snap ring on the right side crank sitting in front of the ball bearings. Application: Now run the puller on the crank axle. Spread the arms of the stripper, than join the three clamps behind the bearing shell. Now turn the rotary spindle of the stripper. The ball bearing should now be deducted equally from the bearing seat. Then clean the bearing seat and grease it a little. To assemble the new ball bearing, you can use the Cyclus tools Impress tool (Part No .: 720 263) for Campagnolo cranks. Accessories: Part No .: 720 252 Adapter Campagnolo crank to pull the bearing ring.

    Artikelnummer: 7720250EAN: 8590831430708Merken: CyclusMateriaal: StaalType gereedschap: TrapasNetto gewicht (g): 1007Kleur.: Zilver

    Productspecificaties

    Artikelnummer(s)
    Brand
    Cycplus
    Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.