webshop.nl

Verlanglijstje

Cyclus Tools Cyclus balhoofdfreesgereedschap 1
Cyclus Tools Cyclus balhoofdfreesgereedschap 1
Cyclus Tools Cyclus balhoofdfreesgereedschap 1

Meer Cyclus Tools
Meer Cyclus Tools in Balhoofden

Cyclus Tools Cyclus balhoofdfreesgereedschap 1

0
Cyclus balhoofdfreesgereedschap 1 Deze frees zorgt voor exact coaxiaal vlakke cuppassing op de balhoofdbuis. M.b.v. de veer is er een constante druk op de frees, waardoor haperingen worden voorkomen. Gebruik de frees uitsluitend in een kloksgewijze richting en gebruik altijd voldoende én de juiste snij-olie. Tip: vóór het frezen; verwijder de event...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Alle aanbiedingen van dit product

    Verkoper
    Bezorging
    Prijs
    Fietsaccessoires.nl logo
    Fietsaccessoires.nl
    2 dagen
    €6,95
    €189,99
    Fietsweb.nl logo
    Fietsweb.nl
    niet bekend
    €6,95
    €212,99

    Anderen bekeken ook

    Cyclus Tools Cyclus balhoofdfreesgereedschap 1
    Cyclus Tools Cyclus balhoofdfreesgereedschap 1
    Cyclus balhoofdfreesgereedschap 1 Deze frees zorgt voor exact coaxiaal vlakke cuppassing op de balhoofdbuis. M.b.v. de veer is er een constante druk op de frees, waardoor haperingen worden voorkomen. Gebruik de frees uitsluitend in een kloksgewijze richting en gebruik altijd voldoende én de juiste snij-olie. Tip: vóór het frezen; verwijder de eventuele chroomlaag om voortijdige slijtage van de frees te voorkomen. Product Description Milling head from Cyclus Tools for standard Ahead (EC) headsets. Technical Information:Max. Head Tube Length:150 mmMax. Milling Depth:15 mmMax. Tube Wall Strength:4 mmMax. Internal Diameter:30 mm (1" ), 34 mm (1 1/8" ), 49.6 mm (1.5" )Features:suitable for head tubeguarantees straight milling, without cantingavailable in assorted sizesModels:1" (30 mm): Required Conical Guide: 45 mmDiameter: 30 mmMilling Depth: 15 mmangle: 90°Specification: ECManufacturer Number: 720005 1 1/8" (34 mm): Required Conical Guide: 45 mmDiameter: 34 mmMilling Depth: 15 mmangle: 9…
    212,99
    Cyclus Tools Cyclus balhoofdfreesgereedschap 1
    Cyclus Tools Cyclus balhoofdfreesgereedschap 1
    Cyclus balhoofdfreesgereedschap 1 Deze frees zorgt voor exact coaxiaal vlakke cuppassing op de balhoofdbuis. M.b.v. de veer is er een constante druk op de frees, waardoor haperingen worden voorkomen. Gebruik de frees uitsluitend in een kloksgewijze richting en gebruik altijd voldoende én de juiste snij-olie. Tip: vóór het frezen; verwijder de eventuele chroomlaag om voortijdige slijtage van de frees te voorkomen. Product Description Milling head from Cyclus Tools for standard Ahead (EC) headsets. Technical Information:Max. Head Tube Length:150 mmMax. Milling Depth:15 mmMax. Tube Wall Strength:4 mmMax. Internal Diameter:30 mm (1" ), 34 mm (1 1/8" ), 49.6 mm (1.5" )Features:suitable for head tubeguarantees straight milling, without cantingavailable in assorted sizesModels:1" (30 mm): Required Conical Guide: 45 mmDiameter: 30 mmMilling Depth: 15 mmangle: 90°Specification: ECManufacturer Number: 720005 1 1/8" (34 mm): Required Conical Guide: 45 mmDiameter: 34 mmMilling Depth: 15 mmangle: 9…
    189,99
    Cyclus Tools milling head for standard head tubes, individual
    Cyclus Tools milling head for standard head tubes, individual
    Maat: 49,6/15/90 graden Benodigde conusgeleider 55mm artikelnummer 720942 Product Description Features:Diameter: 45 mmsuitable for standard head tubesfor precision milling levelled and coaxially positioned shell seats on the head tubemay only ever be rotated in the cutting directionavailable in various versionsModels:1 1/8" (34 mm): Required Conical Guide: 45 mmDiameter: 34 mmMilling Depth: 15 mmangle: 90°Specification: ECManufacturer Number: 720026 1 1/2" (1.5" ): Required Conical Guide: 45 mmDiameter: 49.6 mmMilling Depth: 15 mmangle: 90°Specification: ECManufacturer Number: 720913Contents:1 x Cyclus Tools milling headnot incl. mount Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    158,99
    Cyclus Tools milling head for head tube without holder
    Cyclus Tools milling head for head tube without holder
    Product Description Technical Information:Required Conical Guide:45 mmDiameter:30 mmMilling Depth:15 mmAngle:90°Specification:ECFeatures:suitable for head tubefor precision milling levelled and coaxially positioned shell seats on the head tubemay only ever be rotated in the cutting directionavailable in various versionsManufacturer Number: 720025 Contents:1 x Cyclus Tools milling headnot incl. mount Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    147,99
    Cyclus Tools Voorvork conus-frees cyclus 720003
    Cyclus Tools Voorvork conus-frees cyclus 720003
    Product Description You create exactly levelled crown race seats with this plane milling tool. Features:suitable for crown racewith matching milling cutter in 1" or 1 1/8"max. milling depth 6 mmManufacturer Numbers:1":7200031 1/8":720004 Note: Remove any chrome layers before milling to avoid excessive wear of the cutting edges or " seizing" of the tool on the crown race seat. Contents:1 x Cyclus Tools face milling tool1 x Cyclus Tools mount Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    187,99
    Cyclus Tools face milling cutter for bottom bracket shells with holder
    Cyclus Tools face milling cutter for bottom bracket shells with holder
    Product Description The face milling tool for bottom bracket shells allows you to mill flat bottom bracket faces as a basis for the later assembly of the bottom bracket. Features:max. milling width: 9 mmmax. case diameter: 44 mmT-handle holder with face milling cutter holderface milling cutter singleguide bushing BSA left/right threadguide bushing with Italian and French threadsthreaded rod with threaded socket and springsuitable for bottom bracket shellsManufacturer Number: 720007 Note: To avoid overstressing, even pressure must be applied to the cutter with the help of the guide, spring and threaded sleeve. Additionally, you should pay attention to the housing width of the bottom bracket to be installed during the milling process. Remove any chrome layers before cutting to avoid excessive wear to the cuts. Additionally, suitable cutting oil should be used. Contents:1 x Cyclus Tools face milling cutter1 x mounts Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn German…
    241,99
    Cyclus Tools Cyclus inslaggereedschap ahead plug 1“ 1⅛“ 1½"
    Cyclus Tools Cyclus inslaggereedschap ahead plug 1“ 1⅛“ 1½"
    Cyclus inslaggereedschap Aheadplug tbv 1“ 1.1/8“ 1.5“ vorkb. Product Description Specifications:Function:Fork maintenance and repairTool Type:special toolCompatibility:1" / 1 1/8" / 1.5"Technical Information:Material:steelFeatures:tool for precise installation of the star nut in the steerer tube with a previously defined insertion depthsuitable for 1" , 1 1/8" and 1.5" crown race with the corresponding adapter bushingApplication:1. Screw the required adapter hand-tight into the impactor. 2. Screw the star nut to be fitted onto the grub screw as far as it will go using the cross hole. 3. Place the tool on the steerer tube and hammer it in as far as it will go. 4. Remove the setter from the steerer tube by turning the knurled screw to the left. Manufacturer Number:720033 Contents:1 x Cyclus Tools impactor for headset star nut1 x adapter bushing 1"1 x adapter bushing 1 1/8"1 x adapter bushing 1.5" Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    110,99
    Cyclus Tools quick release nut - tr 16x3
    Cyclus Tools quick release nut - tr 16x3
    Product Description The quick-release nut makes it easier to work with all Cyclus Tools press and milling tools. Pressing or milling becomes much more effective, as the time-consuming turning in and out of the threaded block is no longer necessary. This saves valuable time. The thread is opened by pressing the quick-release nut together. This allows the threaded block to be slid over the threaded rod as needed. When closed, the quick-release nut functions as a threaded nut. Ample thread turns and the robust design of the quick-release nut also allow high contact pressure when pressing. The ergonomic shape allows comfortable and safe work. You can retrofit the quick-release nut to existing tools with threaded rods. Features:tough fine-cast workshop designseveral threads allow high contact pressureergonomic handles for safe workingsuitable for all press and milling tools from Cyclus Toolsquick-release nut open = thread deactivatedquick-release nut closed = function as threaded nutManufac…
    152,99
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    1-1/8 inch compleet met snij-ijzer Cyclus vorkbuissnijwerktuig, 1 1/8 inch compleet met snij-ijzer Product Description The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube. Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread. Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork. Features:suitable for recutting the thread on the fork tubewith matching dieoptionally as 1" or 1 1/8"Manufacturer Numbers:1":720001 sold-out1 1/8":720002 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool. Contents:1 x Cyclu…
    214,99

    Klanten-reviews van Cyclus Tools Cyclus balhoofdfreesgereedschap 1

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cyclus Tools Cyclus balhoofdfreesgereedschap 1

    Productomschrijving

    Cyclus balhoofdfreesgereedschap 1 Deze frees zorgt voor exact coaxiaal vlakke cuppassing op de balhoofdbuis. M.b.v. de veer is er een constante druk op de frees, waardoor haperingen worden voorkomen. Gebruik de frees uitsluitend in een kloksgewijze richting en gebruik altijd voldoende én de juiste snij-olie. Tip: vóór het frezen; verwijder de eventuele chroomlaag om voortijdige slijtage van de frees te voorkomen. Product Description Milling head from Cyclus Tools for standard Ahead (EC) headsets. Technical Information:Max. Head Tube Length:150 mmMax. Milling Depth:15 mmMax. Tube Wall Strength:4 mmMax. Internal Diameter:30 mm (1" ), 34 mm (1 1/8" ), 49.6 mm (1.5" )Features:suitable for head tubeguarantees straight milling, without cantingavailable in assorted sizesModels:1" (30 mm): Required Conical Guide: 45 mmDiameter: 30 mmMilling Depth: 15 mmangle: 90°Specification: ECManufacturer Number: 720005 1 1/8" (34 mm): Required Conical Guide: 45 mmDiameter: 34 mmMilling Depth: 15 mmangle: 90°Specification: ECManufacturer Number: 720006 1.5" (49.6 mm): Required Conical Guide: 45 mmDiameter: 49.6 mmMilling Depth: 15 mmangle: 90°Specification: ECManufacturer Number: 720147Contents:1 x Cyclus Tools double milling head1 x Cyclus Tools T-handle1 x Cyclus Tools turning spindle with thrust bearing1 x Cyclus Tools coil1 x Cyclus Tools conical guide Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu

    Productinformatie

      Productspecificaties

      Artikelnummer(s)
      EAN
      8590831220019
      Brand
      Cyclus Tools

      Verken gerelateerde categorieën

      BalhoofdenFietsonderdelenFietsen
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.