webshop.nl

Verlanglijstje

Cyclus Tools snap.in removal tool for fsa / specialized / cannondale lockrings

Meer Cyclus Tools
Meer Cyclus Tools in Moersleutels

Cyclus Tools snap.in removal tool for fsa / specialized / cannondale lockrings

0
Product Description Specifications:Function:installation & removal of chainringsTool Type:Remover, socketDrive:open-end wrench 32 mm, square wrench 3/8"Compatibility:FSA Direct Mount Cranks, Specialized Direct Mount Cranks, Cannondale Direct Mount CranksTechnical Information:Material:steelFeatures:tool for the chainring lockring of FSA / Specialize...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Alle aanbiedingen van dit product

    Verkoper
    Bezorging
    Prijs
    Fietsaccessoires.nl logo
    Fietsaccessoires.nl
    2 dagen
    €6,95
    €59,99

    Anderen bekeken ook

    Cyclus Tools snap.in removal tool for fsa / specialized / cannondale lockrings
    Cyclus Tools snap.in removal tool for fsa / specialized / cannondale lockrings
    Product Description Specifications:Function:installation & removal of chainringsTool Type:Remover, socketDrive:open-end wrench 32 mm, square wrench 3/8"Compatibility:FSA Direct Mount Cranks, Specialized Direct Mount Cranks, Cannondale Direct Mount CranksTechnical Information:Material:steelFeatures:tool for the chainring lockring of FSA / Specialized / Cannondale direct-mount cranksintegrated guide for insertion for non-slip fituse with Snap.In holder from Cyclus Tools or with 32 mm open-end wrench3/8" torque wrench recommended for tightening the lockringNote from the manufacturer:When tightening the lockring, please observe the torque specified by the manufacturer. Not designed for use with cordless or impact screwdrivers. Manufacturer Number:7202757 Contents:1 x Cyclus Tools Snap.In removal tool for FSA Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    59,99
    Cyclus Tools Snap.in e-bike afnemer cyclus sn.86-w shimano steps ep8
    Cyclus Tools Snap.in e-bike afnemer cyclus sn.86-w shimano steps ep8
    Cyclus snap.In E-bike afnemer SN.86-W Shimano Steps EP8 Merk: Cyclus Basismateriaal: staal Basiskleur: zwart Product Description Specifications:Function:installation & removal of chainringsTool Type:Remover, socketDrive:open-end wrench 32 mm, square wrench 3/8"Compatibility:Shimano EP8 e-bike motors, Shimano STEPS E8000 e-bike motors, Shimano STEPS E6100 e-bike motorsTechnical Information:Material:steelFeatures:tool for the chainring lockring on Shimano e-bike mid-drive motors (EP8, E8000, E6100)integrated guide for bolting to the motor axle for a non-slip fitpossibility of one-hand operationpositive-locking connection with the toothing of the locknut by means of a pull-turn mechanism, high torques possibleuse with Snap.In holder from Cyclus Tools or with 32 mm open-end wrench3/8" torque wrench recommended for tightening the lockringNote from the manufacturer:When tightening the lockring, please observe the torque specified by the manufacturer. Not designed for use with cordless or imp…
    134,99
    Unior Bike Tools removal tool for bb90 1625/2bb90
    Unior Bike Tools removal tool for bb90 1625/2bb90
    Product Description Specifications:Function:bottom bracket removalTool Type:special toolDrive:Open-end wrench 13 mm, open-end wrench 6 mmCompatibility:BB90, BB86, BB92, SRAM Press Fit GXPSize:22 mm / 24 mm (guide heads)Technical Information:Material:steelFeatures:two-part tool for removing press fit bottom brackets (24 mm and GXP)made of tool steelApplication:Select the appropriate guide head, assemble the tool and insert the guide head into the bottom bracketTighten the screw slightly on the outside until the tool fits perfectly on the frameTighten the screw with a 13 mm open-ended wrench while holding it with a 6 mm wrenchContinue to turn the screw until the bottom bracket can be pulled out Manufacturer Number:623085 Contents:1 x Unior Bike Tools Removal Tool 1625/2BB90 for BB901 x guide head 24 mm1 x guide head 22 mm Weight: universal: 318 g Manufacturer: Unior d.d. Kovaška cesta 10 3214 Zreče Slovenia info@unior.com Dit gereedschap is ontworpen voor het verwijderen van niet-geschr…
    48,99
    Cyclus Tools Grs cyclus momentsleutel 3/8" 5-25nm
    Cyclus Tools Grs cyclus momentsleutel 3/8" 5-25nm
    Product Description A torque wrench is an indispensable tool for many screw connections on high-quality bicycles and for carbon add-on parts. Many manufacturers specify the tightening torques of their products and no product liability is assumed in the event of non-compliance. Technical Information:Drive:3/8"Torque:5 - 25 NmLength:300 mmDirection of Operation:clockwiseFeatures:adjustment range from 5 to 25 Nmwith 3/8" attachmenthandy ratchetwith signal function (right only)Manufacturer Number: 720116 Contents:1 x Cyclus Tools torque wrenchincl. storage box Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu Cyclus Artikelnummer: 737009 EAN-code: 4718399086715
    107,99
    Unior Bike Tools cassette removal tool 1670.4/4 for campagnolo
    Unior Bike Tools cassette removal tool 1670.4/4 for campagnolo
    Product Description Specifications:Function:Disassembly and assembly of cassettes, disassembly and assembly of bottom bracketsTool Type:Remover, socketType:multi-toothDrive:square 1/2" , open-end wrench 21 mmCompatibility:CampagnoloTechnical Information:Material:steelFeatures:removal tool for Campagnolo bottom brackets and cassettesfor use in combination with a ratchetlength 44.2 mmmade of burnished tool steelchain whip or counter-holder requiredManufacturer Number:616707 Contents:1 x Unior Bike Tools Cassette Removal Tool 1670.4/4 Weight: black: 54 g Manufacturer: Unior d.d. Kovaška cesta 10 3214 Zreče Slovenia info@unior.com De cassette-afnemer wordt gebruikt voor het verwijderen van Campagnolo vrijlopen. Gebruik de cassette-afnemer samen met de Unior 1/2" ratel.Gebruik de cassette-afnemer samen met de Unior 1/2" ratelUnior Artikelnummer: 693492 EAN-code: 3838909167077
    28,99
    Unior Bike Tools 2-in-1 pocket spoke & cassette lockring tool 1669/4
    Unior Bike Tools 2-in-1 pocket spoke & cassette lockring tool 1669/4
    Product Description Unior Bike Tools 2-in-1 Cassette Lockring Tool with Spoke Wrench 1669/4 - Practical aid on bike trips The Unior Bike Tools 2-in-1 tool 1669/4 combines a cassette lockring tool and a spoke wrench function. It is ideal for longer bike tours or bike trips where you want to take as few accessories as possible. The tool provides uncomplicated help when you need to quickly remove the cassette, e.g. to change a spoke on the right side of the rear wheel. It is inserted between the cassette lockring and the axle nut and ensures that the lockring releases when the pedal is pressed down. You tighten the lockring in the same way after re-mounting the cassette. A protective plastic plate to prevent scratches on the frame is included. The tool can also be used as a size 3.3 mm spoke wrench. It is made of premium carbon steel and has been burnished for higher durability. Specifications:Function:Disassembly and assembly of cassettes, truing tool, wheel truingTool Type:special toolS…
    25,99
    Cyclus Tools press ring 1 1/8" for semi ihs headset
    Cyclus Tools press ring 1 1/8" for semi ihs headset
    Cyclus persbus balhoofd semi geintergreerd geschikt voor snelspanklauw 720953 Product Description This press ring is suitable for pressing headset cups into a head tube with the Semi IHS dimension. These press rings are designed to be used with the quick-release nut. This ensures professional, safe and above all fast work. For professional use, you need the suitable press-in spindle for headsets incl. the compatible counterholder. Ideally, this should be the quick release nut. Compatibility:24084 Cyclus Tools snap.in - press spindle for headset - SN.10-S24082 Cyclus Tools holder for head tube press tool - generation 22402300 Cyclus Tools press tool for headset 1" & 1 1/8"2402200 Cyclus Tools head tube press tool, 500 mm for frames with extra long head tubes2402400 Cyclus Tools press tool for 1 1/2" headset2402500 Cyclus Tools press tool for semi-integrated headsetsManufacturer Number:2408202 Contents:1 x Cyclus Tools 1 1/8" press ring Semi IHS Manufacturer: Cyclus Tools Julius-Kruttsch…
    35,99
    Cyclus Tools Uitdrijver lagerschalen campa a.naaf cyclus 720111
    Cyclus Tools Uitdrijver lagerschalen campa a.naaf cyclus 720111
    Product Description The drift is suitable for driving out Campagnolo rear wheel bearing cups. Features:suitable for Campagnolo bearing cupversion for rear wheelManufacturer Number: 720111 Note: This removal tool is not suitable for Campagnolo OVZ hubs (e.g. Record from 1999 model...). Please note that the removal tool consists of spring steel and always must lie flat on the bearing cup to be removed. Incorrect use (e.g. by tilting) can damage the ejector. You should therefore always work carefully when pulling. Contents:1 x Cyclus Tools bearing cup removal tool, rear hubs Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    48,99
    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Cyclus Tools Uitdrijver lagerschalen campa overs.naaf cyclus 720112
    Product Description The extractor is suitable for extracting Campagnolo Oversize front and rear wheel bearing cups. The driver fits Campagnolo OVZ front and rear hubs (e.g. Record from model 1999 HB-40 RE, current Record FH-29 RE, Record HB7, Record FH7) Features:suitable for Campagnolo bearing cupVersion for OversizeManufacturer Number: 720112 Contents:1 x Cyclus Tools OVZ bearing cup removal tool Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu Cyclus Artikelnummer: 679911 EAN-code: 8590831240437
    53,99
    Cyclus Tools Voorvork conus-frees cyclus 720003
    Cyclus Tools Voorvork conus-frees cyclus 720003
    Product Description You create exactly levelled crown race seats with this plane milling tool. Features:suitable for crown racewith matching milling cutter in 1" or 1 1/8"max. milling depth 6 mmManufacturer Numbers:1":7200031 1/8":720004 Note: Remove any chrome layers before milling to avoid excessive wear of the cutting edges or " seizing" of the tool on the crown race seat. Contents:1 x Cyclus Tools face milling tool1 x Cyclus Tools mount Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    187,99

    Klanten-reviews van Cyclus Tools snap.in removal tool for fsa / specialized / cannondale lockrings

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cyclus Tools snap.in removal tool for fsa / specialized / cannondale lockrings

    Productomschrijving

    Product Description Specifications:Function:installation & removal of chainringsTool Type:Remover, socketDrive:open-end wrench 32 mm, square wrench 3/8"Compatibility:FSA Direct Mount Cranks, Specialized Direct Mount Cranks, Cannondale Direct Mount CranksTechnical Information:Material:steelFeatures:tool for the chainring lockring of FSA / Specialized / Cannondale direct-mount cranksintegrated guide for insertion for non-slip fituse with Snap.In holder from Cyclus Tools or with 32 mm open-end wrench3/8" torque wrench recommended for tightening the lockringNote from the manufacturer:When tightening the lockring, please observe the torque specified by the manufacturer. Not designed for use with cordless or impact screwdrivers. Manufacturer Number:7202757 Contents:1 x Cyclus Tools Snap.In removal tool for FSA Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu

    Productinformatie

      Productspecificaties

      Artikelnummer(s)
      EAN
      8590831434836
      Brand
      Cyclus Tools

      Verken gerelateerde categorieën

      MoersleutelsGereedschapKlussen
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.