webshop.nl

Verlanglijstje

Cyclus Tools Cyclus vorkbuissnijder nieuw schroefdraad zonder snij-ijzer
Cyclus Tools Cyclus vorkbuissnijder nieuw schroefdraad zonder snij-ijzer
Cyclus Tools Cyclus vorkbuissnijder nieuw schroefdraad zonder snij-ijzer
+ 2 more

Meer Cyclus Tools
Meer Cyclus Tools in Handvatten

Cyclus Tools Cyclus vorkbuissnijder nieuw schroefdraad zonder snij-ijzer

0
Product Description Steerer tube cutter for cutting new threads during fork assembly. Manufacturer Number: 720077 Contents:1 x Cyclus Tools steerer tube cutting toolnot incl. threading die Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu...

Snel naar

  • Prijzen

    PrijzenProductomschrijvingProductspecificaties

    Verkopers met dit product

    Verkoper
    Bezorging
    Prijs
    Fietsaccessoires.nl logo
    Fietsaccessoires.nl
    2 dagen
    €6,95
    €143,99
    Fietsweb.nl logo
    Fietsweb.nl
    niet bekend
    €6,95
    €143,99

    Anderen bekeken ook

    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    1-1/8 inch compleet met snij-ijzer Cyclus vorkbuissnijwerktuig, 1 1/8 inch compleet met snij-ijzer Product Description The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube. Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread. Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork. Features:suitable for recutting the thread on the fork tubewith matching dieoptionally as 1" or 1 1/8"Manufacturer Numbers:1":720001 sold-out1 1/8":720002 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool. Contents:1 x Cyclu…
    190,99
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    Cyclus Tools Vorkbuis snijwerktuig 1 1/8" cyclus
    1-1/8 inch compleet met snij-ijzer Cyclus vorkbuissnijwerktuig, 1 1/8 inch compleet met snij-ijzer Product Description The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube. Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread. Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork. Features:suitable for recutting the thread on the fork tubewith matching dieoptionally as 1" or 1 1/8"Manufacturer Numbers:1":720001 sold-out1 1/8":720002 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool. Contents:1 x Cyclu…
    190,99
    Cyclus Tools Cyclus snij-ijzerset bracketpot bsa 1.37“x24tpi
    Cyclus Tools Cyclus snij-ijzerset bracketpot bsa 1.37“x24tpi
    Product Description Compatibility: Cyclus Tools threaded cutter Features:suitable for the Cyclus Tools thread cutting toolserves to recut the bottom bracket threadoptionally available in BSA or ITA versionManufacturer Numbers:ITA:720022BSA:720028Contents:ITA: 2 x Cyclus Tools right threading die BSA: 1 x Cyclus Tools right threading die1 x Cyclus Tools left threading die Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    106,99
    Cyclus Tools Cyclus snij-ijzerset bracketpot bsa 1.37“x24tpi
    Cyclus Tools Cyclus snij-ijzerset bracketpot bsa 1.37“x24tpi
    Product Description Compatibility: Cyclus Tools threaded cutter Features:suitable for the Cyclus Tools thread cutting toolserves to recut the bottom bracket threadoptionally available in BSA or ITA versionManufacturer Numbers:ITA:720022BSA:720028Contents:ITA: 2 x Cyclus Tools right threading die BSA: 1 x Cyclus Tools right threading die1 x Cyclus Tools left threading die Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu
    106,99
    Cyclus Tools Cyclus draadsnijgereedschap trapas bsa 1,37" x 24 tpi
    Cyclus Tools Cyclus draadsnijgereedschap trapas bsa 1,37" x 24 tpi
    CJ0304A Cyclus BSA draadsnij gereedschap Trapasdraadsnijgereedschap voor het nasnijden van bracketdraad. - Inclusief hoogwaardige snijijzers, #7720028 Merk: Cyclus Basiskleur: Blauw Sleutel maat: 35 mm Fiets onderdeel: trapas/bottom bracket Cyclus trapas draadsnijgereedschap, BSA (1,370 x 24 tpi) 2-delig. Wordt geleverd inclusief snij-ijzer Product Description Features:two T-handle holders with die holderBSA left/right or ITA die paircutting guide with lock nutserves to create an optimal coaxiality of the threads in the bottom bracket shellboth sides of the tool must be screwed in at the same time to prevent jamming and damaging the threadManufacturer Numbers:BSA:720008ITA:720029 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the cutting tool is cleaned regularly and oiled with cutting oil, which increases the service life of the tool. Contents:2 x Cyclus Tools standard T-handle with threading die mount1 x pair of Cyclus Tools threading …
    150,99
    Cyclus Tools Cyclus draadsnijgereedschap trapas bsa 1,37" x 24 tpi
    Cyclus Tools Cyclus draadsnijgereedschap trapas bsa 1,37" x 24 tpi
    CJ0304A Cyclus BSA draadsnij gereedschap Trapasdraadsnijgereedschap voor het nasnijden van bracketdraad. - Inclusief hoogwaardige snijijzers, #7720028 Merk: Cyclus Basiskleur: Blauw Sleutel maat: 35 mm Fiets onderdeel: trapas/bottom bracket Cyclus trapas draadsnijgereedschap, BSA (1,370 x 24 tpi) 2-delig. Wordt geleverd inclusief snij-ijzer Product Description Features:two T-handle holders with die holderBSA left/right or ITA die paircutting guide with lock nutserves to create an optimal coaxiality of the threads in the bottom bracket shellboth sides of the tool must be screwed in at the same time to prevent jamming and damaging the threadManufacturer Numbers:BSA:720008ITA:720029 Note: Use an oil suitable for the material for the cutting process. It is also recommended that the cutting tool is cleaned regularly and oiled with cutting oil, which increases the service life of the tool. Contents:2 x Cyclus Tools standard T-handle with threading die mount1 x pair of Cyclus Tools threading …
    150,99

    Klanten-reviews van Cyclus Tools Cyclus vorkbuissnijder nieuw schroefdraad zonder snij-ijzer

    Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

    Meer over Cyclus Tools Cyclus vorkbuissnijder nieuw schroefdraad zonder snij-ijzer

    Productomschrijving

    Product Description Steerer tube cutter for cutting new threads during fork assembly. Manufacturer Number: 720077 Contents:1 x Cyclus Tools steerer tube cutting toolnot incl. threading die Manufacturer: Cyclus Tools Julius-Kruttschnitt-Str. 55 53129 Bonn Germany info@cyclus-tools.eu

    Productinformatie

      Productspecificaties

      Artikelnummer(s)
      EAN
      8590831311007
      Brand
      Cyclus Tools

      Verken gerelateerde categorieën

      HandvattenFietsonderdelenFietsen
      Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.