Boston 058-BLR stemmechanieken voor gitaarbutton is 23 mm wide, shaft is 6 mm in diameter and 27 mm in lengthdistance between screw holes is 27mm40,55
Boston 058-GLR stemmechanieken voor gitaarbutton is 23 mm wide, shaft is 6 mm in diameter and 27 mm in length.distance between screw holes is 27mm47,35
Boston 058-BLR stemmechanieken voor gitaarbutton is 23 mm wide, shaft is 6 mm in diameter and 27 mm in lengthdistance between screw holes is 27mm40,55
Boston 059-BLR stemmechanieken voor gitaarbutton is 18,5 mm wide, shaft is 6 mm in diameter and 26 mm in length38,15
Boston 059-BLR stemmechanieken voor gitaarbutton is 18,5 mm wide, shaft is 6 mm in diameter and 26 mm in length38,15
Boston 058-CLR stemmechanieken voor gitaarDe knop is 18,5mm breed, de schacht is 6mm in diameter en 27mm lang.De afstand tussen de schroefgaten is 27mm.35,85
Boston 058-CLR stemmechanieken voor gitaarDe knop is 18,5mm breed, de schacht is 6mm in diameter en 27mm lang.De afstand tussen de schroefgaten is 27mm.35,85
CTS USA CTS-B50/20- standard length bushing .375"- 3/8" diameterValue:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for …140,09
CTS USA CTS500-A53Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…12,60
CTS USA CTS500-A54Value:Typically 250K pots are used for single coil pickups and 500K pots for humbucker pickups. The bigger the resistance value, the brighter the sound will be/ less highs will bleed off. 1MEG can be used to make humbuckers sound brighter.Taper:The taper of a pot refers to the way its resistance changes as the shaft is rotated. A linear taper pot will work in a linear way related to shaft rotation. As the human ear is not linear in response to increasing volume, an audio (aka. logarithmic) pot will work best for volume applications.A third option available is 'vintage audio taper'. These pots are 30% logarithmic: with the pot halfway open, the audio response/output is at 30%. Audio/log pots have an output of 10% in the same setting, linear pots are at 50% output. So, their taper is roughly halfway in between audio/log and linear taper pots. They are very similar to the original spec for vintage Stratocaster® guitar pots and can be used for both tone and volume controls.Shaft:A split, k…14,09