Productomschrijving
EAN: 4011377179103 - manufacturer-number: 390041SR - KNX LED universal dimming actuator, 4-gang 39004 1S R, 4 x 225 W, HV LED lamps typ. 4 x 1 ... 35 W (leading edge phase control), 4 x 1 ... 200 W (trailing edge phase control), 1 x 855 W, with manual electronic operation and LED status indication, Project design and commissioning with ETS5 or a more recent version. Rail mounting device, 4 rail units, ETS product family: Illumination, Product type: Dimmer, The device is compatible with KNX Data Secure. KNX Data Secure offers protection against manipulation in buidling automation. A dedicated application is required for secure operation. Additional information is available at: KNX Secure, Intended use: Switching and dimming of incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with LV halogen or LV LED lamps, dimmable electronic transformers with LV halogen or LV LED lamps, Mounting on DIN rail according to EN 60715 in distribution boxes, Product characteristics: Outputs can be operated manually, construction site mode, Feedback in manual mode and in bus mode, Disabling of individual outputs manually or via bus, Status feedback, KNX Data Secure compatible with ETS 5.7.3 or higher, Can be updated with the ETS Service App, Dimming operation characteristic: Automatic or manual setting of the dimming principle suitable for the load, Protected against no-load, short-circuit and overheating, Signal in the event of a short-circuit, power failure and overload, Feedback of the switching position and the dimming value, Parameterisable switch-on and dimming behaviour, Time functions: switch-on delay, switch-off delay, staircase lighting timer with pre-warning function, Light scene operation, Status indication of the outputs via LED, Operating hours counter, Mains failure longer than approx. 5 seconds leads to switch-off of the dimmer actuator. Depending on the parameter setting, the connected load is calibrated after resumption of power supply. Increase in output power possible through parallel switching of multiple outputs, Power extension possible by means of power boosters (ref.-no. ULZ 1755 REG), Optional accessory: compensation module LED, ref.-no.: KM LED 230 U, Logic function characteristics: Logic gates, Transformer (conversion), Disabling element, Comparator, Limit value switch, Technical data, Rated voltage: AC 110 ... 230 V ~, Mains frequency: 50/60 Hz, Power loss: max. 7 W, Stand-by power: approx. 0.16 W per channel, Ambient temperature: -5 ... +45 °C, Storage/transport temperature: -25 ... +70 °C, Lamp loads, Operation modes Zolluniversal Zoll, Zollleading edge phase control Zoll, ZollLED leading edge phase control Zoll, Connected load, 230 V per output, Incandescent lamps: 20 ... 225 W, HV halogen lamps: 20 ... 225 W, If the operating mode for LED and HV halogen lamps is set to Zollleading edge phase control Zoll or ZollLED leading edge phase control Zoll, the maximum connected load falls to 20 ... 210 W., Inductive transformers: 20 ... 210 VA, Inductive transformers with LV LED: 20 ... 100 VA, Electronic transformers: 20 ... 210 W, Electronic transformers with LV LED: 20 ... 100 W, Dimmable HV LED lamps: typical 1 ... 35 W, Dimmable compact fluorescent lamps: typical 20 ... 80 W, Mixed load types, Capacitive-inductive: not permitted, If the maximum connected load is lowered to 110 V, the lamp loads fall by 50 %., For inductive transformers and inductive transformers with LV LED, the operation mode Zollleading edge phase control Zoll is not permitted., Operation modes Zolltrailing edge phase control Zoll, ZollLED trailing edge phase control Zoll, Connected load, 230 V per output, Incandescent lamps: 20 ... 225 W, HV halogen lamps: 20 ... - 39004 1S R
