webshop.nl
Categorieën
  Sluiten

Meer Enttec
Meer Enttec in Audio & hifi

Enttec RDS4 - Special price

The RDS4 is DMX/RDM compatible 4 port fully isolated splitter. It allows users to build an RDM (E1.20-2006) compliant network DMX. Current DMX splitters will not allow RDM enabled devices to function properly, the RDS4 now solves this problem while allowing your RDM devices to talk back to a controller.Features:- 1 DMX input and 4 DMX out...
340,-

Webshops met dit product

Webshop
Bezorging
Prijs

Anderen bekeken ook

Enttec RDS4
Enttec RDS4
The RDS4 is DMX/RDM compatible 4 port fully isolated splitter. It allows users to build an RDM (E1.20-2006) compliant network DMX. Current DMX splitters will not allow RDM enabled devices to function properly, the RDS4 now solves this problem while allowing your RDM devices to talk back to a controller. Features: - 1 DMX input and 4 DMX outputs. Normal mode: splitter actively repeats RDM traffic bidirectionally while level information goes from controller to DMX devices as usual - Filter Mode: Single button-press allows all RDM traffic to be filtered out, for legacy devices which might flicker if they saw the messages on the line - Backup Mode: Another button bypasses intelligent RDM functionality completely to work as a traditional DMX splitter would - Fully compliant with ESTA and USITT standards for DMX512A with RDM and RDM Standard ANSI E1.20 - 2006* Internal autoranging power supply Specifications: - RDS4 supports one universe of 512…
366,-
Enttec RDS8
Enttec RDS8
The RDS8 is DMX/RDM compatible 8 port fully isolated splitter. It allows users to build an RDM (E1.20-2006) compliant network DMX. Current DMX splitters will not allow RDM enabled devices to function properly, the RDS8 now solves this problem while allowing your RDM devices to talk back to a controller. Features: - 1 DMX input and 8 DMX outputs. Normal mode: splitter actively repeats RDM traffic bidirectionally while level information goes from controller to DMX devices as usual - Filter Mode: Single button-press allows all RDM traffic to be filtered out, for legacy devices which might flicker if they saw the messages on the line - Backup Mode: Another button bypasses intelligent RDM functionality completely to work as a traditional DMX splitter would - Fully compliant with ESTA and USITT standards for DMX512A with RDM and RDM Standard ANSI E1.20 - 2006* - Internal autoranging power supply Specifications: RDS8 supports one universe of 5…
735,-
Enttec DIN-LED4PX LED Driver DMX/RDM
Enttec DIN-LED4PX LED Driver DMX/RDM
The DIN-LED4PX is a 4 channel constant voltage LED driver with DMX/RDM input. Each channel can control up to 1A @ 24V (supplied by external power supply). Dimming is performed with a 500Hz PWM signal, and 8 bit resolution. There are 2 automode programs with adjustable speeds that cycle through colours when RGB leds are connected to the outputs. DMX address or Automode is set using any standard RDM controller Specificaties: 4 LED ports on 10 way screw connectors 1 input DMX on 3 way screw connector Status LED Each channel has auto reset 1A over current protection Standard 4 module wide din-rail enclosure Operating 0 >50 ambient
110,-
Enttec DMXIS Licht control software met interface
Enttec DMXIS Licht control software met interface
DMXIS is the easy way to create exciting live light shows with your Mac OS® orWindows® based computer. DMXIS was designed specifically for live performers who want to run an automated light show while performing on stage. The hardware is incredibly easy to connect up, and the software extremely simple to learn and operate, while being flexible enough to control modern intelligent light fixtures. Hardware style user interface is quick to learn and easy to use Controls any DMX-512 compatible light fixture, including classic dimmer packs, LED fixtures, and intelligent lighting (e.g. scanners & moving heads) Create static looks, dynamic chases & moving effects with smooth cross-fades Intuitive tempo-based approach, for perfect synchronisation of lighting & music Runs as a standalone program, VST plug-in, or Audio Unit plug-in** Supports 512 DMX channels & unlimited number of fixtures Outputs one DMX-512 universe (512 channels of control) Full microprocess…
254,-
EUROLITE Set DMX Split 8X Splitter + transmitter + receiver
EUROLITE Set DMX Split 8X Splitter + transmitter + receiver
DMX splitter with one wireless DMX transmitter and a phantom powered wireless DMX receiverEUROLITE DMX Split 8X SplitterSplitter with 8 galvanically isolated outputs, 3/5-pin & QuickDMX XLR socketsDMX splitter for splitting one DMX input signal to 8 DMX outputsConnections: 1 x DMX input, 1 x DMX feed-through output, 8 x DMX outputInput and outputs XLR 3-pin and 5-pin eachInput and outputs galvanically isolatedEach DMX output with independent driver and status indicatorInput and outputs with a set of respective power supply and internal fuseSwitchable termination resistorControlling by DMX; QuickDMX via 5-pin XLR (M) mounting version (optional)(19") 48.3 cm rack installation 1 UPackage contents1 x device, 1 x user manual, 1 x power cordEUROLITE QuickDMX Wireless TransmitterCompact wireless DMX transmitter 2.4 GHzUser-friendly 3-pin XLR plug (male) with swivel antennaWireless DMX eliminates extensive cabling between DMX controller and the DMX-controlled units in lighting installationsDue…
366,60
Enttec DMX PlayBack MKII
Enttec DMX PlayBack MKII
Enttec DMXPlayBack MK2 With this unit, you can record and store a light show, then let the unit playback the show for as long as you like. The DMXPlayBack MK2 is perfect for unattended light shows or demonstrations that run continuously. The unit can store up to 500 static scenes per show. A show can be programmed to start: when the unit is powered, external trigger .... You could even control the PlayBack from any RS232 capable device: show control system, Hyper Terminal, basic stamp ... (check the communication protocol in the download section for a complete set of commands). Clients have also used the DMXPlayBack MK2 with a more sophisticated control systems such as AMX? systems, where multiple DMXPlayBacks were used to ouput DMX512 pre recorded scenes. Loading and fading of the scenes were commanded from RS232. The DMXPlayBack Mk2 also offers REALTIME control of your lighting fixtures, when you change a parameter on the PalmPilot or …
319,-
Enttec DMX Streamer Show recorder
Enttec DMX Streamer Show recorder
Enttec DMXStreamer The DMXStreamer is the most valuable DMX512 tool you will find. This product records any DMX512 stream for up to 20 hours. You simply play your lighting sequence and record it with the DMXStreamer. You can then play it back when you need it, or automaticaly based on time of day with the inbuilt real time clock. This unit is great for any architectural work thanks to the inbuilt clock and scheduling features or simply backing up a lighting control system in case problems occur. The automatic backup will start a predefined show if there is loss of DMX signal. A recording time estimate chart is available in the user manual. Features: - DMX512 streaming recorder/playback system - Full 512 channel streaming recorder - Up to 26 shows - Up to 23 hours of recording Technical Specifications: - DMX512 streaming recorder/playback system - Full 512 channel streaming recorder - Up to 26 shows - Up to 23 hours of record…
773,-
ANTARI DarkFX Drive 4 MK2
ANTARI DarkFX Drive 4 MK2
The Antari DarkFX Drive 4 MKII is a compact driver exclusively designed for the Antari DarkFX high-power UV fixtures. Equipped with 4 bare wire terminal blocks for up to 4 fixtures, it can be used to adjust dimmer brightness and strobe speed.The DarkFX Drive 4 MKII is operated in one of two modes: Either in DMX mode with 2 channels via the 5-pin XLR connectors (with RDM support) or in stand-alone mode via the LCD display and the 4 operating buttons. Use the powerCON input to connect it to the mains.DMX control unit for a total of 4 Antari DarkFX Strips or DarkFX SpotsVarious dimmer curves adjustableTerminal blocks support four fixturesCan be operated in 2 CH modeThe device is cooled by passive convection coolingControlling by RDM; DMX; stand-aloneBuilt with NEUTRIK connectorPackage contents1 x device, 1 x user manual, 1 x power cordPower supply:100-240 V AC, 50/60 HzPower consumption:75 WIP classification:IP20DMX channels:2DMX input:1 x 5-pin XLR (M) mounting versionDMX output:1 x 5-pi…
440,15
Enttec DMX USB Pro MKII
Enttec DMX USB Pro MKII
Lees meer over het gebruik van een enttec dongel in onze TUTORIAL FREESTYLER DMX De nieuwe DMX USB Pro2 is een licht gewicht, compacte behuizing en klaar voor de volgende generatie applicaties. De Pro2 ondersteunt twee volledige lijnen DMX-512. Het kan gebruikt worden als een output naar DMX-verlichting of als input om interactie mogelijk te maken met andere DMX bronnen middels een software programma op een pc of laptop. Een on-board processor zorgt voor een exacte timing en signaleringsdata wordt geproduceerd zonder dat hier fouten bij optreden. Deze DMX interface is compatible met vele (gratis) DMX software. Hieronder staan een paar bekende voorbeelden van DMX software die je kunt gebruiken: Freestyler (Gratis) CHAMSYS MagicQ PC (Gratis) Zie ook de tutorial over Freestyler DMX. SPECIFICATIES: Dubbele, volledig onafhankelijk, DMX poorten elk volledige RDM capaciteit MIDI-ingang en-uitgang Stand alone modus met automatisch herhaling van de lichtshow (max. 1 DMX line) Eén firmware-ve…
195,-
Enttec Open DMX Ethernet met POE
Enttec Open DMX Ethernet met POE
Enttec ODE with POEBorn from the Open DMX USB and DMX USB PRO, the ODE is the industry's first affordable DMX Ethernet gateway. Out of the box, the ODE is configured as an Art-Net output node on universe 0:0 but can be easily and quickly changed using the free NMU tool. This means there are no dip-switches or thumb wheels to worry about on the ODE. The ODE is perfect for distributing DMX signals over Cat5 in a cost effective manner or with wireless ethernet systems.Features:- 10/100 Ethernet port- 802.11af (Power Over Ethernet)*- Supports Artnet and ESP- 1 Input & 1 Output connector (not simultaneous use)- Status, Direction and Link leds- Ethercon connector- 7V power supply (option)- ARM 32bit Processor.- Upgradeable firmware* POE router or injector required, unless you add the optional 7V power supply.
305,-

Klanten-reviews van Enttec RDS4 - Special price

Er zijn nog geen beoordelingen voor dit productBen jij de eerste die een review plaatst?

Meer over Enttec RDS4 - Special price

Productomschrijving

The RDS4 is DMX/RDM compatible 4 port fully isolated splitter. It allows users to build an RDM (E1.20-2006) compliant network DMX. Current DMX splitters will not allow RDM enabled devices to function properly, the RDS4 now solves this problem while allowing your RDM devices to talk back to a controller.

Features:
- 1 DMX input and 4 DMX outputs. Normal mode: splitter actively repeats RDM traffic bidirectionally while level information goes from controller to DMX devices as usual
- Filter Mode: Single button-press allows all RDM traffic to be filtered out, for legacy devices which might flicker if they saw the messages on the line
- Backup Mode: Another button bypasses intelligent RDM functionality completely to work as a traditional DMX splitter would
- Fully compliant with ESTA and USITT standards for DMX512A with RDM and RDM Standard ANSI E1.20 - 2006*
Internal autoranging power supply

Specifications:

- RDS4 supports one universe of 512 output addresses
- All 5 ports are isolated up to 1500V
- Input Port is 5 pin XLR Male
- Output Ports are 5 pin XLR Female
- Break Length Time : Replicates input signal to within 50us
- Refresh Cycle : Replicates input signal
- CE, FCC certified

Klik hier voor een digitale gebruikers handleiding. (externe website)

Productspecificaties

Artikelnummer(s)
Brand
Enttec
SKU
EP106001SP
Webshop.nl maakt gebruik van cookies. Ga je verder op onze website, ga dan akkoord met het plaatsen van cookies en de verwerking van deze data door ons en vermelde partners.